lkml.org 
[lkml]   [2022]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] PCI/ACPI: do not reference a pci device after it has been released
On Mon, Jun 27, 2022 at 5:07 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Thu, Apr 28, 2022 at 10:30:38PM +0200, Rafael J. Wysocki wrote:
> > On Thu, Apr 28, 2022 at 10:15 PM Rafael J. Wysocki <rafael@kernel.org> wrote:
> > >
> > > On Thu, Apr 28, 2022 at 6:22 PM Greg Kroah-Hartman
> > > <gregkh@linuxfoundation.org> wrote:
> > > >
> > > > On Thu, Apr 28, 2022 at 10:58:58AM -0500, Bjorn Helgaas wrote:
> > > > > On Thu, Apr 28, 2022 at 04:28:53PM +0200, Greg Kroah-Hartman wrote:
> > > > > > In acpi_get_pci_dev(), the debugging message for when a PCI bridge is
> > > > > > not found uses a pointer to a pci device whose reference has just been
> > > > > > dropped. The chance that this really is a device that is now been
> > > > > > removed from the system is almost impossible to happen, but to be safe,
> > > > > > let's print out the debugging message based on the acpi root device
> > > > > > which we do have a valid reference to at the moment.
> > > > >
> > > > > This code was added by 497fb54f578e ("ACPI / PCI: Fix NULL pointer
> > > > > dereference in acpi_get_pci_dev() (rev. 2)"). Not sure if it's worth
> > > > > a Fixes: tag.
> > > >
> > > > Can't hurt, I'll add it for the v2 based on this review.
> > > >
> > > > >
> > > > > acpi_get_pci_dev() is used by only five callers, three of which are
> > > > > video/backlight related. I'm always skeptical of one-off interfaces
> > > > > like this, but I don't know enough to propose any refactoring or other
> > > > > alternatives.
> > > > >
> > > > > I'll leave this for Rafael, but if I were applying I would silently
> > > > > touch up the subject to match convention:
> > > > >
> > > > > PCI/ACPI: Do not reference PCI device after it has been released
> > > >
> > > > Much simpler, thanks.
> > > >
> > > > >
> > > > > > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > > > > > Cc: "Rafael J. Wysocki" <rafael@kernel.org>
> > > > > > Cc: Len Brown <lenb@kernel.org>
> > > > > > Cc: linux-pci@vger.kernel.org
> > > > > > Cc: linux-acpi@vger.kernel.org
> > > > > > Reported-by: whitehat002 <hackyzh002@gmail.com>
> > > > > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > > > > ---
> > > > > > drivers/acpi/pci_root.c | 3 ++-
> > > > > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
> > > > > > index 6f9e75d14808..ecda378dbc09 100644
> > > > > > --- a/drivers/acpi/pci_root.c
> > > > > > +++ b/drivers/acpi/pci_root.c
> > > > > > @@ -303,7 +303,8 @@ struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
> > > > > > * case pdev->subordinate will be NULL for the parent.
> > > > > > */
> > > > > > if (!pbus) {
> > > > > > - dev_dbg(&pdev->dev, "Not a PCI-to-PCI bridge\n");
> > > > > > + dev_dbg(&root->device->dev,
> > > > > > + "dev %d, function %d is not a PCI-to-PCI bridge\n", dev, fn);
> > > > >
> > > > > This should use "%02x.%d" to be consistent with the dev_set_name() in
> > > > > pci_setup_device().
> > > >
> > > > Ah, missed that, will change it and send out a new version tomorrow.
> > >
> > > I would make the change below (modulo the gmail-induced wthite space
> > > breakage), though.
> >
> > That said ->
> >
> > > ---
> > > drivers/acpi/pci_root.c | 5 +++--
> > > 1 file changed, 3 insertions(+), 2 deletions(-)
> > >
> > > Index: linux-pm/drivers/acpi/pci_root.c
> > > ===================================================================
> > > --- linux-pm.orig/drivers/acpi/pci_root.c
> > > +++ linux-pm/drivers/acpi/pci_root.c
> > > @@ -295,8 +295,6 @@ struct pci_dev *acpi_get_pci_dev(acpi_ha
> > > break;
> > >
> > > pbus = pdev->subordinate;
> > > - pci_dev_put(pdev);
> > > -
> > > /*
> > > * This function may be called for a non-PCI device that has a
> > > * PCI parent (eg. a disk under a PCI SATA controller). In that
> > > @@ -304,9 +302,12 @@ struct pci_dev *acpi_get_pci_dev(acpi_ha
> > > */
> > > if (!pbus) {
> > > dev_dbg(&pdev->dev, "Not a PCI-to-PCI bridge\n");
> > > + pci_dev_put(pdev);
> > > pdev = NULL;
> > > break;
> > > }
> > > +
> > > + pci_dev_put(pdev);
> >
> > -> we are going to use pbus after this and it is pdev->subordinate
> > which cannot survive without pdev AFAICS.
> >
> > Are we not concerned about this case?
>
> Good point.
>
> whitehat002, any ideas? You found this issue but it really looks like
> it is not anything that can ever be hit, so how far do you want to go to
> unwind it?

I have an idea, sorry for the delay here.

I should be ready to post something tomorrow.

Cheers!

\
 
 \ /
  Last update: 2022-06-27 18:38    [W:7.745 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site