lkml.org 
[lkml]   [2022]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/4] mfd: rt5120: Add Richtek PMIC support
Lee Jones <lee.jones@linaro.org> 於 2022年6月27日 週一 晚上10:22寫道:
>
> On Wed, 22 Jun 2022, cy_huang wrote:
>
> > From: ChiYuan Huang <cy_huang@richtek.com>
> >
> > Add Richtek RT5120 PMIC I2C driver.
>
> Why a whole new driver?
>
> How different is this to rt5033?
>
> Looks like this could easily be woven into this existing support?
>
It's different with the function domain.
RT5033 is most like as the SubPMIC that includes PMU (battery
charger/gauge/led/few buck and ldo)
RT5120 is a main PMIC with default-on power that follows the boot on sequence.
RT5120 only integrates regulator and power key report module.

> > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> > ---
> > drivers/mfd/Kconfig | 12 +++++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/rt5120.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 138 insertions(+)
> > create mode 100644 drivers/mfd/rt5120.c
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 3b59456..866619c 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -1127,6 +1127,18 @@ config MFD_RT5033
> > sub-devices like charger, fuel gauge, flash LED, current source,
> > LDO and Buck.
> >
> > +config MFD_RT5120
> > + tristate "Richtek RT5120 Power Management IC"
> > + depends on I2C
> > + select MFD_CORE
> > + select REGMAP_I2C
> > + select REGMAP_IRQ
> > + help
> > + The enables support for Richtek RT5120 PMIC. It includes four high
> > + efficiency buck converters and one LDO voltage regulator. The device
> > + is targeted at providing the CPU voltage, memory, I/O and peripheral
> > + power rails in home entertainment devices.
> > +
> > config MFD_RC5T583
> > bool "Ricoh RC5T583 Power Management system device"
> > depends on I2C=y
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index 858cacf..27e8add 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -234,6 +234,7 @@ obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
> > obj-$(CONFIG_MFD_DLN2) += dln2.o
> > obj-$(CONFIG_MFD_RT4831) += rt4831.o
> > obj-$(CONFIG_MFD_RT5033) += rt5033.o
> > +obj-$(CONFIG_MFD_RT5120) += rt5120.o
> > obj-$(CONFIG_MFD_SKY81452) += sky81452.o
> >
> > intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> > diff --git a/drivers/mfd/rt5120.c b/drivers/mfd/rt5120.c
> > new file mode 100644
> > index 00000000..e7c5f3c
> > --- /dev/null
> > +++ b/drivers/mfd/rt5120.c
> > @@ -0,0 +1,125 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/regmap.h>
> > +
> > +#define RT5120_REG_INTENABLE 0x1D
> > +#define RT5120_REG_INTSTAT 0x1E
> > +#define RT5120_REG_FZCMODE 0x44
> > +
> > +#define RT5120_INT_HOTDIE 0
> > +#define RT5120_INT_PWRKEY_REL 5
> > +#define RT5120_INT_PWRKEY_PRESS 6
> > +
> > +static const struct regmap_range rt5120_rd_yes_ranges[] = {
> > + regmap_reg_range(0x03, 0x13),
> > + regmap_reg_range(0x1c, 0x20),
> > + regmap_reg_range(0x44, 0x44)
> > +};
> > +
> > +static const struct regmap_range rt5120_wr_yes_ranges[] = {
> > + regmap_reg_range(0x06, 0x13),
> > + regmap_reg_range(0x1c, 0x20),
> > + regmap_reg_range(0x44, 0x44)
> > +};
> > +
> > +static const struct regmap_access_table rt5120_rd_table = {
> > + .yes_ranges = rt5120_rd_yes_ranges,
> > + .n_yes_ranges = ARRAY_SIZE(rt5120_rd_yes_ranges),
> > +};
> > +
> > +static const struct regmap_access_table rt5120_wr_table = {
> > + .yes_ranges = rt5120_wr_yes_ranges,
> > + .n_yes_ranges = ARRAY_SIZE(rt5120_wr_yes_ranges),
> > +};
> > +
> > +static const struct regmap_config rt5120_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > + .max_register = RT5120_REG_FZCMODE,
> > +
> > + .wr_table = &rt5120_wr_table,
> > + .rd_table = &rt5120_rd_table,
> > +};
> > +
> > +static const struct regmap_irq rt5120_irqs[] = {
> > + REGMAP_IRQ_REG_LINE(RT5120_INT_HOTDIE, 8),
> > + REGMAP_IRQ_REG_LINE(RT5120_INT_PWRKEY_REL, 8),
> > + REGMAP_IRQ_REG_LINE(RT5120_INT_PWRKEY_PRESS, 8)
> > +};
> > +
> > +static const struct regmap_irq_chip rt5120_irq_chip = {
> > + .name = "rt5120-pmic",
> > + .status_base = RT5120_REG_INTSTAT,
> > + .mask_base = RT5120_REG_INTENABLE,
> > + .ack_base = RT5120_REG_INTSTAT,
> > + .mask_invert = true,
> > + .use_ack = true,
> > + .num_regs = 1,
> > + .irqs = rt5120_irqs,
> > + .num_irqs = ARRAY_SIZE(rt5120_irqs),
> > +};
> > +
> > +static const struct resource rt5120_regulator_resources[] = {
> > + DEFINE_RES_IRQ(RT5120_INT_HOTDIE)
> > +};
> > +
> > +static const struct resource rt5120_pwrkey_resources[] = {
> > + DEFINE_RES_IRQ_NAMED(RT5120_INT_PWRKEY_PRESS, "pwrkey-press"),
> > + DEFINE_RES_IRQ_NAMED(RT5120_INT_PWRKEY_REL, "pwrkey-release")
> > +};
> > +
> > +static const struct mfd_cell rt5120_devs[] = {
> > + MFD_CELL_RES("rt5120-regulator", rt5120_regulator_resources),
> > + MFD_CELL_OF("rt5120-pwrkey", rt5120_pwrkey_resources, NULL, 0, 0,
> > + "richtek,rt5120-pwrkey")
> > +};
> > +
> > +static int rt5120_probe(struct i2c_client *i2c)
> > +{
> > + struct regmap *regmap;
> > + struct regmap_irq_chip_data *irq_data;
> > + int ret;
> > +
> > + regmap = devm_regmap_init_i2c(i2c, &rt5120_regmap_config);
> > + if (IS_ERR(regmap)) {
> > + ret = PTR_ERR(regmap);
> > + dev_err(&i2c->dev, "Failed to init regmap (%d)\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, i2c->irq,
> > + IRQF_ONESHOT, 0, &rt5120_irq_chip,
> > + &irq_data);
> > + if (ret) {
> > + dev_err(&i2c->dev, "Failed to add irq chip (%d)\n", ret);
> > + return ret;
> > + }
> > +
> > + return devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, rt5120_devs,
> > + ARRAY_SIZE(rt5120_devs), NULL, 0,
> > + regmap_irq_get_domain(irq_data));
> > +}
> > +
> > +static const struct of_device_id rt5120_device_match_table[] = {
> > + { .compatible = "richtek,rt5120", },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(of, rt5120_device_match_table);
> > +
> > +static struct i2c_driver rt5120_driver = {
> > + .driver = {
> > + .name = "rt5120",
> > + .of_match_table = rt5120_device_match_table,
> > + },
> > + .probe_new = rt5120_probe,
> > +};
> > +module_i2c_driver(rt5120_driver);
> > +
> > +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
> > +MODULE_DESCRIPTION("Richtek RT5120 I2C driver");
> > +MODULE_LICENSE("GPL v2");
>
> --
> Lee Jones [李琼斯]
> Principal Technical Lead - Developer Services
> Linaro.org │ Open source software for Arm SoCs
> Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2022-06-27 16:57    [W:0.094 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site