lkml.org 
[lkml]   [2022]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7/v3 17/22] gpu: host1x: Program interrupt destinations on Tegra234
Date
From: Mikko Perttunen <mperttunen@nvidia.com>

On Tegra234, each Host1x VM has 8 interrupt lines. Each syncpoint
can be configured with which interrupt line should be used for
threshold interrupt, allowing for load balancing.

For now, to keep backwards compatibility, just set all syncpoints
to the first interrupt.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
drivers/gpu/host1x/hw/intr_hw.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/host1x/hw/intr_hw.c b/drivers/gpu/host1x/hw/intr_hw.c
index f56375ee6e71..9acccdb139e6 100644
--- a/drivers/gpu/host1x/hw/intr_hw.c
+++ b/drivers/gpu/host1x/hw/intr_hw.c
@@ -76,6 +76,17 @@ static void intr_hw_init(struct host1x *host, u32 cpm)
/* update host clocks per usec */
host1x_sync_writel(host, cpm, HOST1X_SYNC_USEC_CLK);
#endif
+#if HOST1X_HW >= 8
+ u32 id;
+
+ /*
+ * Program threshold interrupt destination among 8 lines per VM,
+ * per syncpoint. For now, just direct all to the first interrupt
+ * line.
+ */
+ for (id = 0; id < host->info->nb_pts; id++)
+ host1x_sync_writel(host, 0, HOST1X_SYNC_SYNCPT_INTR_DEST(id));
+#endif
}

static int
--
2.36.1
\
 
 \ /
  Last update: 2022-06-27 16:23    [W:0.083 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site