lkml.org 
[lkml]   [2022]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: [net-next 2/2] dt-bindings: net: adin1110: Add docs
    Date
    On Fri, 24 Jun 2022 23:06:28 +0300, alexandru.tachici@analog.com wrote:
    > From: Alexandru Tachici <alexandru.tachici@analog.com>
    >
    > Add bindings for the ADIN1110/2111 MAC-PHY/SWITCH.
    >
    > Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
    > ---
    > .../devicetree/bindings/net/adi,adin1110.yaml | 127 ++++++++++++++++++
    > 1 file changed, 127 insertions(+)
    > create mode 100644 Documentation/devicetree/bindings/net/adi,adin1110.yaml
    >

    My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
    on your patch (DT_CHECKER_FLAGS is new in v5.13):

    yamllint warnings/errors:

    dtschema/dtc warnings/errors:
    ./Documentation/devicetree/bindings/net/adi,adin1110.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/net/spi-controller.yaml
    /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1110.example.dtb: ethernet@0: False schema does not allow {'compatible': ['adi,adin2111'], 'reg': [[0]], 'spi-max-frequency': [[24500000]], 'adi,spi-crc': True, '#address-cells': [[1]], '#size-cells': [[0]], 'interrupts': [[25, 2]], 'mac-address': [[202, 47, 183, 16, 35, 99]], 'phy@0': {'#phy-cells': [[0]], 'compatible': ['ethernet-phy-id0283.bca1'], 'reg': [[0]]}, 'phy@1': {'#phy-cells': [[0]], 'compatible': ['ethernet-phy-id0283.bca1'], 'reg': [[1]]}, '$nodename': ['ethernet@0']}
    From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1110.yaml

    doc reference errors (make refcheckdocs):

    See https://patchwork.ozlabs.org/patch/

    This check can fail if there are any dependencies. The base for a patch
    series is generally the most recent rc1.

    If you already ran 'make dt_binding_check' and didn't see the above
    error(s), then make sure 'yamllint' is installed and dt-schema is up to
    date:

    pip3 install dtschema --upgrade

    Please check and re-submit.

    \
     
     \ /
      Last update: 2022-06-27 15:33    [W:3.872 / U:0.064 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site