lkml.org 
[lkml]   [2022]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/6] pinctrl: sunxi: Allwinner D1/D1s support
Date
This series adds pinctrl support for the Allwinner D1/D1s SoCs. First,
it updates the I/O bias code to support the new mode found on the D1/D1s
(as well as some existing SoCs). Then it refactors the driver to support
the new register layout found on the D1/D1s. Finally, it adds the new
driver.

The code size impact of the dynamic register layout ends up being just
over 100 bytes:

text data bss dec hex filename
11293 564 0 11857 2e51 pinctrl-sunxi.o (patch 3)
11405 564 0 11969 2ec1 pinctrl-sunxi.o (patch 6)

This series was tested on A64, H6, and D1.


Samuel Holland (6):
dt-bindings: pinctrl: Add compatibles for Allwinner D1/D1s
pinctrl: sunxi: Add I/O bias setting for H6 R-PIO
pinctrl: sunxi: Support the 2.5V I/O bias mode
pinctrl: sunxi: Refactor register/offset calculation
pinctrl: sunxi: Make some layout parameters dynamic
pinctrl: sunxi: Add driver for Allwinner D1/D1s

.../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 15 +
drivers/pinctrl/sunxi/Kconfig | 5 +
drivers/pinctrl/sunxi/Makefile | 1 +
drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c | 860 ++++++++++++++++++
drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c | 1 +
drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c | 2 +-
drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c | 1 +
drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c | 2 +-
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 156 +++-
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 110 +--
10 files changed, 1022 insertions(+), 131 deletions(-)
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c

--
2.35.1

\
 
 \ /
  Last update: 2022-06-26 04:12    [W:0.203 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site