lkml.org 
[lkml]   [2022]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/5] irqchip: Add RZ/G2L IA55 Interrupt Controller driver
On Sat, 25 Jun 2022 13:48:08 +0100,
"Lad, Prabhakar" <prabhakar.csengg@gmail.com> wrote:
>
> Hi Marc,
>
> On Sat, Jun 25, 2022 at 1:08 PM Marc Zyngier <maz@kernel.org> wrote:
> >
> > On Sat, 25 Jun 2022 11:54:44 +0100,
> > "Lad, Prabhakar" <prabhakar.csengg@gmail.com> wrote:
> > >
> > > Hi Marc,
> > >
> > > Thank you for the review.
> > >
> > > On Sat, Jun 25, 2022 at 10:30 AM Marc Zyngier <maz@kernel.org> wrote:
> > > >
> > > > On Mon, 23 May 2022 18:42:35 +0100,
> > > > Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > > > >
> >
> > [...]
> >
> > > > > +static int rzg2l_irqc_alloc(struct irq_domain *domain, unsigned int virq,
> > > > > + unsigned int nr_irqs, void *arg)
> > > > > +{
> > > > > + struct rzg2l_irqc_priv *priv = domain->host_data;
> > > > > + unsigned long *chip_data = NULL;
> > > >
> > > > Why the init to NULL?
> > > >
> > > Can be dropped.
> > >
> > > > > + struct irq_fwspec spec;
> > > > > + irq_hw_number_t hwirq;
> > > > > + int tint = -EINVAL;
> > > > > + unsigned int type;
> > > > > + unsigned int i;
> > > > > + int ret;
> > > > > +
> > > > > + ret = irq_domain_translate_twocell(domain, arg, &hwirq, &type);
> > > > > + if (ret)
> > > > > + return ret;
> > > > > +
> > > > > + /*
> > > > > + * For TINT interrupts ie where pinctrl driver is child of irqc domain
> > > > > + * the hwirq and TINT are encoded in fwspec->param[0].
> > > > > + * hwirq for TINT range from 9-40, hwirq is embedded 0-15 bits and TINT
> > > > > + * from 16-31 bits. TINT from the pinctrl driver needs to be programmed
> > > > > + * in IRQC registers to enable a given gpio pin as interrupt.
> > > > > + */
> > > > > + if (hwirq > IRQC_IRQ_COUNT) {
> > > > > + tint = TINT_EXTRACT_GPIOINT(hwirq);
> > > > > + hwirq = TINT_EXTRACT_HWIRQ(hwirq);
> > > > > +
> > > > > + if (hwirq < IRQC_TINT_START)
> > > > > + return -EINVAL;
> > > > > + }
> > > > > +
> > > > > + if (hwirq > (IRQC_NUM_IRQ - 1))
> > > > > + return -EINVAL;
> > > > > +
> > > > > + chip_data = kzalloc(sizeof(*chip_data), GFP_KERNEL);
> > > >
> > > > Are we really allocating an unsigned long for something that already
> > > > fits in something that is pointer-sized?
> > > >
> > > I think I received some feedback to use unsigned long. Let me know
> > > what you want me to use here.
> >
> > I think this is just a waste of memory, but I don't really care.
> >
> Is there any better way I can handle it?

How about (shock, horror) a cast?

>
> > >
> > > > > + if (!chip_data)
> > > > > + return -ENOMEM;
> > > > > + *chip_data = tint;
> > > >
> > > > So here, *chip_data can be set to -EINVAL if hwirq <= IRQC_IRQ_COUNT?
> > > > This can't be right.
> > > >
> > > Yes *chip_data can be -EINVAL. IRQC block handles IRQ0-7 and
> > > GPIOINT0-122. So the -EINVAL here is for IRQ0-7 case were dont
> > > required the chip data in the call backs hence -EINVAL, Whereas for
> > > GPIOINT0-122 we need chip_data in the callbacks as this value needs to
> > > be programmed in the hardware registers.
> >
> > I can't see anything that checks it (let alone the difference in
> > types). And if it isn't checked, this means that the allocation is
> > pointless.
> >
> There are checks for example below:
>
> static void rzg2l_irqc_irq_enable(struct irq_data *d)
> {
> unsigned int hw_irq = irqd_to_hwirq(d);
>
> if (hw_irq >= IRQC_TINT_START && hw_irq < IRQC_NUM_IRQ) {
> struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
> unsigned long chip_data = *(unsigned long *)d->chip_data;
> u32 offset = hw_irq - IRQC_TINT_START;
> u32 tssr_offset = TSSR_OFFSET(offset);
> u8 tssr_index = TSSR_INDEX(offset);
> u32 reg;
>
> raw_spin_lock(&priv->lock);
> reg = readl_relaxed(priv->base + TSSR(tssr_index));
> reg |= (TIEN | chip_data) << TSSEL_SHIFT(tssr_offset);
> writel_relaxed(reg, priv->base + TSSR(tssr_index));
> raw_spin_unlock(&priv->lock);
> }
> irq_chip_enable_parent(d);
> }
>
> This check hw_irq >= IRQC_TINT_START && hw_irq < IRQC_NUM_IRQ here
> would mean its GPIOINT0-122 and then the chip data will be used.

That doesn't check the content of chip_data if outside of this
condition. Nonetheless, you allocate an unsigned long to store
-EINVAL. Not only this is a pointless allocation, but you use it to
store something that you never retrieve the first place. Don't you see
the problem?

M.

--
Without deviation from the norm, progress is not possible.

\
 
 \ /
  Last update: 2022-06-25 18:11    [W:0.075 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site