lkml.org 
[lkml]   [2022]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/3] regulator: dt-bindings: qcom,smd-rpm: Add PM8909
Date
On Thu, 23 Jun 2022 11:46:13 +0200, Stephan Gerhold wrote:
> Document the "qcom,rpm-pm8909-regulators" compatible for describing
> the regulators available in the PM8909 PMIC (controlled via the RPM
> firmware).
>
> PM8909 is very similar to the existing PM8916 but lacks 3 of the
> regulators (s3, s4 and l16).
>
> Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
> ---
> .../devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml | 4 ++++
> 1 file changed, 4 insertions(+)
>

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


pm8994-regulators: 'vdd_lvs1_2' does not match any of the regexes: '.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dtb
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dtb
arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dtb

\
 
 \ /
  Last update: 2022-06-24 19:29    [W:0.101 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site