lkml.org 
[lkml]   [2022]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] fpga: region: Add fpga-region 'power-domains' property
On Mon, May 23, 2022 at 07:15:16PM +0530, Nava kishore Manne wrote:
> Add fpga-region 'power-domains' property to allow to handle
> the FPGA/PL power domains.
>
> Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> Changes for v2:
> - Updated power-domains description.
>
> .../devicetree/bindings/fpga/fpga-region.txt | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
> index 7d3515264838..f299c3749505 100644
> --- a/Documentation/devicetree/bindings/fpga/fpga-region.txt
> +++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt
> @@ -196,6 +196,20 @@ Optional properties:
> - config-complete-timeout-us : The maximum time in microseconds time for the
> FPGA to go to operating mode after the region has been programmed.
> - child nodes : devices in the FPGA after programming.
> +- power-domains : A phandle and power domain specifier pair to the power domain
> + which is responsible for turning on/off the power to the FPGA/PL region.

Could you help explain what is PL?

> +Example:
> + fpga_full: fpga-full {
> + compatible = "fpga-region";
> + fpga-mgr = <&zynqmp_pcap>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + power-domains = <&zynqmp_firmware PL_PD>;
> + };
> +
> + The PL_PD power domain will be turned on before loading the bitstream
> +and turned off while removing/unloading the bitstream using overlays.

I think the single power-domain may not cover some use cases that
of-fpga-region driver supports. It is possible there are already
devices in fpga-region for static OF tree, or an overlay with no
'firmware-name' but 'external-fpga-config'. In these cases power domains
may still be needed, is it?

Another case is the fpga-region may need multiple power domains?

Since the of-fpga-region driver is a generic fpga-region driver, we may
investigate more for a compatible power-domain solution.

Thanks,
Yilun

>
> In the example below, when an overlay is applied targeting fpga-region0,
> fpga_mgr is used to program the FPGA. Two bridges are controlled during
> --
> 2.25.1

\
 
 \ /
  Last update: 2022-06-24 18:37    [W:0.113 / U:3.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site