lkml.org 
[lkml]   [2022]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: connector: usb: align example indentation to four-space
Date
One DTS example was using 8-space indentation, while others 2-space.
For complex DTS with multiple levels, 2-space is not that readable and
in DTS examples 4-space is preferred.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/connector/usb-connector.yaml | 152 +++++++++---------
1 file changed, 76 insertions(+), 76 deletions(-)

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 0420fa563532..ae515651fc6b 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -263,11 +263,11 @@ examples:
# Micro-USB connector with HS lines routed via controller (MUIC).
- |
muic-max77843 {
- usb_con1: connector {
- compatible = "usb-b-connector";
- label = "micro-USB";
- type = "micro";
- };
+ usb_con1: connector {
+ compatible = "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ };
};

# USB-C connector attached to CC controller (s2mm005), HS lines routed
@@ -275,34 +275,34 @@ examples:
# DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
- |
ccic: s2mm005 {
- usb_con2: connector {
- compatible = "usb-c-connector";
- label = "USB-C";
+ usb_con2: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";

- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;

- port@0 {
- reg = <0>;
- usb_con_hs: endpoint {
- remote-endpoint = <&max77865_usbc_hs>;
- };
- };
- port@1 {
- reg = <1>;
- usb_con_ss: endpoint {
- remote-endpoint = <&usbdrd_phy_ss>;
- };
- };
- port@2 {
- reg = <2>;
- usb_con_sbu: endpoint {
- remote-endpoint = <&dp_aux>;
+ port@0 {
+ reg = <0>;
+ usb_con_hs: endpoint {
+ remote-endpoint = <&max77865_usbc_hs>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ usb_con_ss: endpoint {
+ remote-endpoint = <&usbdrd_phy_ss>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ usb_con_sbu: endpoint {
+ remote-endpoint = <&dp_aux>;
+ };
+ };
};
- };
};
- };
};

# USB-C connector attached to a typec port controller(ptn5110), which has
@@ -310,16 +310,16 @@ examples:
- |
#include <dt-bindings/usb/pd.h>
typec: ptn5110 {
- usb_con3: connector {
- compatible = "usb-c-connector";
- label = "USB-C";
- power-role = "dual";
- try-power-role = "sink";
- source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
- sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
- PDO_VAR(5000, 12000, 2000)>;
- op-sink-microwatt = <10000000>;
- };
+ usb_con3: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 12000, 2000)>;
+ op-sink-microwatt = <10000000>;
+ };
};

# USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220)
@@ -332,20 +332,20 @@ examples:
data-role = "dual";

ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- hs_ep: endpoint {
- remote-endpoint = <&usb3_hs_ep>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hs_ep: endpoint {
+ remote-endpoint = <&usb3_hs_ep>;
};
- port@1 {
- reg = <1>;
- ss_ep: endpoint {
- remote-endpoint = <&hd3ss3220_in_ep>;
- };
+ };
+ port@1 {
+ reg = <1>;
+ ss_ep: endpoint {
+ remote-endpoint = <&hd3ss3220_in_ep>;
};
+ };
};
};

@@ -354,12 +354,12 @@ examples:
#include <dt-bindings/gpio/gpio.h>

usb {
- connector {
- compatible = "gpio-usb-b-connector", "usb-b-connector";
- type = "micro";
- id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
- vbus-supply = <&usb_p0_vbus>;
- };
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ type = "micro";
+ id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_p0_vbus>;
+ };
};

# Micro-USB connector with HS lines routed via controller (MUIC) and MHL
@@ -367,27 +367,27 @@ examples:
# mobile phone
- |
muic-max77843 {
- usb_con4: connector {
- compatible = "samsung,usb-connector-11pin", "usb-b-connector";
- label = "micro-USB";
- type = "micro";
+ usb_con4: connector {
+ compatible = "samsung,usb-connector-11pin", "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";

- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;

- port@0 {
- reg = <0>;
- muic_to_usb: endpoint {
- remote-endpoint = <&usb_to_muic>;
- };
- };
- port@3 {
- reg = <3>;
- usb_con_mhl: endpoint {
- remote-endpoint = <&sii8620_mhl>;
+ port@0 {
+ reg = <0>;
+ muic_to_usb: endpoint {
+ remote-endpoint = <&usb_to_muic>;
+ };
+ };
+ port@3 {
+ reg = <3>;
+ usb_con_mhl: endpoint {
+ remote-endpoint = <&sii8620_mhl>;
+ };
+ };
};
- };
};
- };
};
--
2.34.1
\
 
 \ /
  Last update: 2022-06-24 18:23    [W:0.041 / U:2.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site