lkml.org 
[lkml]   [2022]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] ARM: dts: aspeed: Add device tree for Ampere's Mt. Mitchell BMC
From
On 21/06/2022 11:21, Quan Nguyen wrote:
> The Mt. Mitchell BMC is an ASPEED AST2600-based BMC for the Mt. Mitchell
> hardware reference platform with AmpereOne(TM) processor.
>
> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
> Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> .../boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 579 ++++++++++++++++++
> 2 files changed, 580 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5112f493f494..93c236c14fa0 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1558,6 +1558,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-ast2600-evb.dtb \
> aspeed-bmc-amd-ethanolx.dtb \
> aspeed-bmc-ampere-mtjade.dtb \
> + aspeed-bmc-ampere-mtmitchell.dtb \
> aspeed-bmc-arm-centriq2400-rep.dtb \
> aspeed-bmc-arm-stardragon4800-rep2.dtb \
> aspeed-bmc-asrock-e3c246d4i.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> new file mode 100644
> index 000000000000..42425e13030a
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> @@ -0,0 +1,579 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +// Copyright 2022 Ampere Computing LTC.
> +
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "Ampere Mt.Mitchell BMC";
> + compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";

The compatible has to be documented. Please rebase on top of:
https://lore.kernel.org/all/20220529104928.79636-3-krzysztof.kozlowski@linaro.org/

> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200n8 earlycon";

console is not needed, earlycon is debugging tool so definitely should
not go to mainline widely distributed DTS. Remove entire bootargs.

> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x80000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> +
> + video_engine_memory: video {
> + size = <0x04000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> +
> + /* 1GB memory */
> + vga_memory: region@bf000000 {
> + no-map;
> + compatible = "shared-dma-pool";
> + reg = <0xbf000000 0x01000000>; /* 16M */
> + };
> +

No need for blank line.

> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + S0_overtemp {

Only lower-case letters, no underscore but hyphen. Missing prefix (e.g.
key/event/switch/button)

See:
https://lore.kernel.org/all/20220616005224.18391-1-krzysztof.kozlowski@linaro.org/


> + label = "S0_OVERTEMP";
> + gpios = <&gpio0 ASPEED_GPIO(V, 7) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(V, 7)>;
> + };
> +
> + S0_hightemp {
> + label = "S0_HIGHTEMP";
> + gpios = <&gpio0 ASPEED_GPIO(V, 0) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(V, 0)>;
> + };
> +
> + S1_overtemp {
> + label = "S1_OVERTEMP";
> + gpios = <&gpio0 ASPEED_GPIO(X, 6) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(X, 6)>;
> + };
> +
> + S1_hightemp {
> + label = "S1_HIGHTEMP";
> + gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(X, 3)>;
> + };
> + };
> +
> + ltc2497_reg: ltc2497_regulator {

No underscores in node name, no specific names (Devicetree spec requires
generic), so ltc2497 has to go. You could add some more specific
prefix/suffix to describe the function.

> + compatible = "regulator-fixed";
> + regulator-name = "ltc2497_reg";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + gpioI5mux: mux-controller {
> + compatible = "gpio-mux";
> + #mux-control-cells = <0>;
> + mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>;
> + };
> +
> + adc0mux: adc0mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 0>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc1mux: adc1mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 1>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc2mux: adc2mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 2>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc3mux: adc3mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 3>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc4mux: adc4mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 4>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc5mux: adc5mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 5>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc6mux: adc6mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 6>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc7mux: adc7mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 7>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc8mux: adc8mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 0>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc9mux: adc9mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 1>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc10mux: adc10mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 2>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc11mux: adc11mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 3>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc12mux: adc12mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 4>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc13mux: adc13mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 5>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc14mux: adc14mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 6>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc15mux: adc15mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 7>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc0mux 0>, <&adc0mux 1>,
> + <&adc1mux 0>, <&adc1mux 1>,
> + <&adc2mux 0>, <&adc2mux 1>,
> + <&adc3mux 0>, <&adc3mux 1>,
> + <&adc4mux 0>, <&adc4mux 1>,
> + <&adc5mux 0>, <&adc5mux 1>,
> + <&adc6mux 0>, <&adc6mux 1>,
> + <&adc7mux 0>, <&adc7mux 1>,
> + <&adc8mux 0>, <&adc8mux 1>,
> + <&adc9mux 0>, <&adc9mux 1>,
> + <&adc10mux 0>, <&adc10mux 1>,
> + <&adc11mux 0>, <&adc11mux 1>,
> + <&adc12mux 0>, <&adc12mux 1>,
> + <&adc13mux 0>, <&adc13mux 1>,
> + <&adc14mux 0>, <&adc14mux 1>,
> + <&adc15mux 0>, <&adc15mux 1>,
> + <&ltc2497 0>, <&ltc2497 1>,
> + <&ltc2497 2>, <&ltc2497 3>,
> + <&ltc2497 4>, <&ltc2497 5>,
> + <&ltc2497 6>, <&ltc2497 7>,
> + <&ltc2497 8>, <&ltc2497 9>,
> + <&ltc2497 10>, <&ltc2497 11>,
> + <&ltc2497 12>, <&ltc2497 13>,
> + <&ltc2497 14>, <&ltc2497 15>;
> + };
> +};
> +
> +&mdio0 {
> + status = "okay";
> +
> + ethphy0: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + };
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + phy-mode = "rgmii";
> + phy-handle = <&ethphy0>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii1_default>;
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-64.dtsi"
> + };
> +
> + flash@1 {
> + status = "okay";
> + m25p,fast-read;
> + label = "alt-bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-64-alt.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> +
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "pnor";
> + spi-max-frequency = <20000000>;
> + };
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + temp@2e {

Generic node name, so usually it is "temperature-sensor"

> + compatible = "adi,adt7490";
> + reg = <0x2e>;
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + psu@58 {
> + compatible = "pmbus";
> + reg = <0x58>;
> + };
> +
> + psu@59 {
> + compatible = "pmbus";
> + reg = <0x59>;
> + };
> +};
> +
> +&i2c3 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + ltc2497: ltc2497@16 {

Generic node name.

> + compatible = "lltc,ltc2497";
> + reg = <0x16>;
> + vref-supply = <&ltc2497_reg>;
> + #io-channel-cells = <1>;
> + status = "okay";
> + };
> +
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> +
> + i2c-mux@70 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> + i2c-mux-idle-disconnect;
> +
> + i2c4_bus70_chn0: i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0>;
> +
> + outlet_temp1: tmp75@48 {

Generic node name.

> + compatible = "ti,tmp75";
> + reg = <0x48>;
> + };
> + psu1_inlet_temp2: tmp75@49 {

Generic node name.

> + compatible = "ti,tmp75";
> + reg = <0x49>;
> + };
> + };
> +
> + i2c4_bus70_chn1: i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x1>;
> +
> + pcie_zone_temp1: tmp75@48 {

Generic node name.

> + compatible = "ti,tmp75";
> + reg = <0x48>;
> + };
> + psu0_inlet_temp2: tmp75@49 {

Generic node name.

> + compatible = "ti,tmp75";
> + reg = <0x49>;
> + };
> + };
> +
> + i2c4_bus70_chn2: i2c@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x2>;
> +
> + pcie_zone_temp2: tmp75@48 {

Generic node name.

> + compatible = "ti,tmp75";
> + reg = <0x48>;
> + };
> + outlet_temp2: tmp75@49 {

Generic node name.

> + compatible = "ti,tmp75";
> + reg = <0x49>;
> + };
> + };
> +
> + i2c4_bus70_chn3: i2c@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x3>;
> +
> + mb_inlet_temp1: tmp75@7c {

Generic node name.

> + compatible = "microchip,emc1413";
> + reg = <0x7c>;
> + };
> + mb_inlet_temp2: tmp75@4c {

Generic node name.

> + compatible = "microchip,emc1413";
> + reg = <0x4c>;
> + };
> + };
> + };
> +};
> +
> +&i2c5 {
> + status = "okay";
> +
> + i2c-mux@70 {
> + compatible = "nxp,pca9548";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> + i2c-mux-idle-disconnect;
> + };
> +};
> +
> +&i2c6 {
> + status = "okay";
> + rtc@51 {
> + compatible = "nxp,pcf85063a";
> + reg = <0x51>;
> + };
> +};
> +
> +&i2c7 {
> + status = "okay";
> +};
> +
> +&i2c9 {
> + status = "okay";
> +};
> +
> +&i2c11 {
> + status = "okay";
> +};
> +
> +&i2c14 {
> + status = "okay";
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> +
> + bmc_ast2600_cpu: tmp175@35 {

Generic node name.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-06-24 17:52    [W:0.060 / U:3.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site