lkml.org 
[lkml]   [2022]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v9 15/16] ARM: dts: r9a06g032-rzn1d400-db: add switch description
Date
Add description for the switch, GMAC2 and MII converter. With these
definitions, the switch port 0 and 1 (MII port 5 and 4) are working on
RZ/N1D-DB board.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 117 ++++++++++++++++++++
1 file changed, 117 insertions(+)

diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
index 3f8f3ce87e12..4227aba70c30 100644
--- a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
+++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
@@ -8,6 +8,8 @@

/dts-v1/;

+#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+#include <dt-bindings/net/pcs-rzn1-miic.h>
#include "r9a06g032.dtsi"

/ {
@@ -31,3 +33,118 @@ &wdt0 {
timeout-sec = <60>;
status = "okay";
};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "gmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&switch {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mdio1>, <&pins_eth3>, <&pins_eth4>;
+
+ dsa,member = <0 0>;
+
+ mdio {
+ clock-frequency = <2500000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy4: ethernet-phy@4 {
+ reg = <4>;
+ micrel,led-mode = <1>;
+ };
+
+ switch0phy5: ethernet-phy@5 {
+ reg = <5>;
+ micrel,led-mode = <1>;
+ };
+ };
+};
+
+&switch_port0 {
+ label = "lan0";
+ phy-mode = "mii";
+ phy-handle = <&switch0phy5>;
+ status = "okay";
+};
+
+&switch_port1 {
+ label = "lan1";
+ phy-mode = "mii";
+ phy-handle = <&switch0phy4>;
+ status = "okay";
+};
+
+&switch_port4 {
+ status = "okay";
+};
+
+&eth_miic {
+ status = "okay";
+ renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
+};
+
+&mii_conv4 {
+ renesas,miic-input = <MIIC_SWITCH_PORTB>;
+ status = "okay";
+};
+
+&mii_conv5 {
+ renesas,miic-input = <MIIC_SWITCH_PORTA>;
+ status = "okay";
+};
+
+&pinctrl{
+ pins_mdio1: pins_mdio1 {
+ pinmux = <
+ RZN1_PINMUX(152, RZN1_FUNC_MDIO1_SWITCH)
+ RZN1_PINMUX(153, RZN1_FUNC_MDIO1_SWITCH)
+ >;
+ };
+ pins_eth3: pins_eth3 {
+ pinmux = <
+ RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(38, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(39, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(40, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(41, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(42, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(43, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(44, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(45, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(46, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(47, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ >;
+ drive-strength = <6>;
+ bias-disable;
+ };
+ pins_eth4: pins_eth4 {
+ pinmux = <
+ RZN1_PINMUX(48, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(49, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(50, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(51, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(52, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(53, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(54, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(55, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(56, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(57, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(58, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ RZN1_PINMUX(59, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
+ >;
+ drive-strength = <6>;
+ bias-disable;
+ };
+};
--
2.36.1
\
 
 \ /
  Last update: 2022-06-24 16:44    [W:0.422 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site