lkml.org 
[lkml]   [2022]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH RESEND v9 5/5] arm64: dts: apm: Harmonize DWC USB3 DT nodes name
    Date
    In accordance with the DWC USB3 bindings the corresponding node
    name is suppose to comply with the Generic USB HCD DT schema, which
    requires the USB nodes to have the name acceptable by the regexp:
    "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
    named despite of the warning comment about possible backward
    compatibility issues.

    Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
    Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
    ---
    arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 4 ++--
    arch/arm64/boot/dts/apm/apm-storm.dtsi | 6 +++---
    2 files changed, 5 insertions(+), 5 deletions(-)

    diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
    index a83c82c50e29..832dd85b00bd 100644
    --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
    +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
    @@ -597,8 +597,8 @@ serial0: serial@10600000 {
    interrupts = <0x0 0x4c 0x4>;
    };

    - /* Do not change dwusb name, coded for backward compatibility */
    - usb0: dwusb@19000000 {
    + /* Node-name might need to be coded as dwusb for backward compatibility */
    + usb0: usb@19000000 {
    status = "disabled";
    compatible = "snps,dwc3";
    reg = <0x0 0x19000000 0x0 0x100000>;
    diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
    index 0f37e77f5459..1520a945b7f9 100644
    --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
    +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
    @@ -923,8 +923,8 @@ sata3: sata@1a800000 {
    phy-names = "sata-phy";
    };

    - /* Do not change dwusb name, coded for backward compatibility */
    - usb0: dwusb@19000000 {
    + /* Node-name might need to be coded as dwusb for backward compatibility */
    + usb0: usb@19000000 {
    status = "disabled";
    compatible = "snps,dwc3";
    reg = <0x0 0x19000000 0x0 0x100000>;
    @@ -933,7 +933,7 @@ usb0: dwusb@19000000 {
    dr_mode = "host";
    };

    - usb1: dwusb@19800000 {
    + usb1: usb@19800000 {
    status = "disabled";
    compatible = "snps,dwc3";
    reg = <0x0 0x19800000 0x0 0x100000>;
    --
    2.35.1
    \
     
     \ /
      Last update: 2022-06-24 16:38    [W:6.169 / U:0.196 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site