lkml.org 
[lkml]   [2022]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH V9 2/3] rtc: zynqmp: Updated calibration value
    Date
    As per RTC spec default calibration value is 0x7FFF.
    We are in process to update the 0x7FFF as default value in
    the next version of TRM.

    Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
    Acked-by: Peter Korsgaard <peter@korsgaard.com>
    ---
    Changes in V8
    -None, just swapped 2/3 and 3/3 patches from V7.
    Changes in V7:
    -New patch
    -TRM not updated yet, Internal design document contains 0x7FFF as
    default value. TRM Will update in next release.
    ---
    drivers/rtc/rtc-zynqmp.c | 2 +-
    1 file changed, 1 insertion(+), 1 deletion(-)

    diff --git a/drivers/rtc/rtc-zynqmp.c b/drivers/rtc/rtc-zynqmp.c
    index f440bb52be92..5da33d760419 100644
    --- a/drivers/rtc/rtc-zynqmp.c
    +++ b/drivers/rtc/rtc-zynqmp.c
    @@ -36,7 +36,7 @@
    #define RTC_OSC_EN BIT(24)
    #define RTC_BATT_EN BIT(31)

    -#define RTC_CALIB_DEF 0x198233
    +#define RTC_CALIB_DEF 0x7FFF
    #define RTC_CALIB_MASK 0x1FFFFF
    #define RTC_ALRM_MASK BIT(1)
    #define RTC_MSEC 1000
    --
    2.25.1
    \
     
     \ /
      Last update: 2022-06-24 14:03    [W:18.514 / U:0.012 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site