lkml.org 
[lkml]   [2022]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] remoteproc: qcom: pas: Adjust the phys addr wrt the mem region
From
Date
Hey Yogesh,
Thanks for the patch.

On 6/3/22 1:30 AM, Yogesh Lal wrote:
> The minidump table in the toc contains physical addresses that may lie
> before the physical address of the first elf segment in relocatable

doesn't this apply to full coredumps as well? Do you plan to address
that in a separate patch?

> images. This change adds a custom dump function for minidumps which
> calculates the offset into the carveout region using the start of
> the physical address instead of the start of the first elf segment.
>
> Signed-off-by: Yogesh Lal <quic_ylal@quicinc.com>
> ---
> drivers/remoteproc/qcom_common.c | 9 +++++----
> drivers/remoteproc/qcom_common.h | 5 ++++-
> drivers/remoteproc/qcom_q6v5_pas.c | 21 ++++++++++++++++++++-
> 3 files changed, 29 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/remoteproc/qcom_common.c b/drivers/remoteproc/qcom_common.c
> index 246e716..503326b 100644
> --- a/drivers/remoteproc/qcom_common.c
> +++ b/drivers/remoteproc/qcom_common.c
> @@ -101,7 +101,8 @@ static void qcom_minidump_cleanup(struct rproc *rproc)
> }
> }
>
> -static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsystem *subsystem)
> +static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsystem *subsystem,
> + rproc_dumpfn_t dumpfn)
> {
> struct minidump_region __iomem *ptr;
> struct minidump_region region;
> @@ -131,7 +132,7 @@ static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsy
> }
> da = le64_to_cpu(region.address);
> size = le32_to_cpu(region.size);
> - rproc_coredump_add_custom_segment(rproc, da, size, NULL, name);
> + rproc_coredump_add_custom_segment(rproc, da, size, dumpfn, name);
> }
> }
>
> @@ -139,7 +140,7 @@ static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsy
> return 0;
> }
>
> -void qcom_minidump(struct rproc *rproc, unsigned int minidump_id)
> +void qcom_minidump(struct rproc *rproc, unsigned int minidump_id, rproc_dumpfn_t dumpfn)
> {
> int ret;
> struct minidump_subsystem *subsystem;
> @@ -179,7 +180,7 @@ void qcom_minidump(struct rproc *rproc, unsigned int minidump_id)
>
> rproc_coredump_cleanup(rproc);
>
> - ret = qcom_add_minidump_segments(rproc, subsystem);
> + ret = qcom_add_minidump_segments(rproc, subsystem, dumpfn);
> if (ret) {
> dev_err(&rproc->dev, "Failed with error: %d while adding minidump entries\n", ret);
> goto clean_minidump;
> diff --git a/drivers/remoteproc/qcom_common.h b/drivers/remoteproc/qcom_common.h
> index c35adf7..29e528b 100644
> --- a/drivers/remoteproc/qcom_common.h
> +++ b/drivers/remoteproc/qcom_common.h
> @@ -33,7 +33,10 @@ struct qcom_rproc_ssr {
> struct qcom_ssr_subsystem *info;
> };
>
> -void qcom_minidump(struct rproc *rproc, unsigned int minidump_id);
> +typedef void (*rproc_dumpfn_t)(struct rproc *rproc, struct rproc_dump_segment *segment,
> + void *dest, size_t offset, size_t size);

you can perhaps stick with not using typedef like how it is handled in
remoteproc_coredump.

> +
> +void qcom_minidump(struct rproc *rproc, unsigned int minidump_id, rproc_dumpfn_t dumpfn);
>
> void qcom_add_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glink,
> const char *ssr_name);
> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
> index 6e5cbca..9c6cb0b 100644
> --- a/drivers/remoteproc/qcom_q6v5_pas.c
> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> @@ -83,11 +83,30 @@ struct qcom_adsp {
> struct qcom_sysmon *sysmon;
> };
>
> +void adsp_segment_dump(struct rproc *rproc, struct rproc_dump_segment *segment,
> + void *dest, size_t offset, size_t size)
> +{
> + struct qcom_adsp *adsp = rproc->priv;
> + int total_offset;
> +
> + total_offset = segment->da + segment->offset + offset - adsp->mem_phys;
> + if (total_offset < 0 || total_offset + size > adsp->mem_size) {
> + dev_err(adsp->dev,
> + "invalid copy request for segment %pad with offset %zu and size %zu)\n",
> + &segment->da, offset, size);
> + memset(dest, 0xff, size);
> + return;
> + }
> +
> + memcpy_fromio(dest, adsp->mem_region + total_offset, size);
> +}
> +
> +
remove additional empty line.

> static void adsp_minidump(struct rproc *rproc)
> {
> struct qcom_adsp *adsp = rproc->priv;
>
> - qcom_minidump(rproc, adsp->minidump_id);
> + qcom_minidump(rproc, adsp->minidump_id, adsp_segment_dump);
> }
>
> static int adsp_pds_enable(struct qcom_adsp *adsp, struct device **pds,
>

\
 
 \ /
  Last update: 2022-06-24 13:19    [W:0.034 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site