Messages in this thread | | | Date | Fri, 24 Jun 2022 12:18:20 +0200 | Subject | Re: [PATCH v5 08/14] dt-bindings: thermal: Add fsl,scu-thermal yaml file | From | Krzysztof Kozlowski <> |
| |
On 16/06/2022 18:42, Viorel Suman wrote: > From: Abel Vesa <abel.vesa@nxp.com> > > In order to replace the fsl,scu txt file from bindings/arm/freescale, > we need to split it between the right subsystems. This patch documents > separately the 'thermal' child node of the SCU main node. > > Signed-off-by: Abel Vesa <abel.vesa@nxp.com> > Signed-off-by: Viorel Suman <viorel.suman@nxp.com> > --- > .../bindings/thermal/fsl,scu-thermal.yaml | 38 +++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml > > diff --git a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml > new file mode 100644 > index 000000000000..8f2646a18ef0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml > @@ -0,0 +1,38 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/thermal/fsl,scu-thermal.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: i.MX SCU Client Device Node - Thermal bindings based on SCU Message Protocol > + > +maintainers: > + - Dong Aisheng <aisheng.dong@nxp.com> > + > +description: i.MX SCU Client Device Node > + Client nodes are maintained as children of the relevant IMX-SCU device node. > + > +allOf: > + - $ref: /schemas/thermal/thermal-sensor.yaml# > + > +properties: > + compatible: > + items: > + - const: fsl,imx8qxp-sc-thermal > + - const: fsl,imx-sc-thermal > + > + '#thermal-sensor-cells': > + const: 1 > + > +required: > + - compatible > + - '#thermal-sensor-cells' > + > +additionalProperties: false > + > +examples: > + - | > + thermal-sensor {
Wrong indentation.
> + compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal"; > + #thermal-sensor-cells = <1>; > + };
Best regards, Krzysztof
| |