Messages in this thread | | | Date | Fri, 24 Jun 2022 10:27:00 +0200 | From | Pali Rohár <> | Subject | Re: [PATCH] powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers |
| |
On Friday 24 June 2022 13:08:59 Michael Ellerman wrote: > Pali Rohár <pali@kernel.org> writes: > > CZ.NIC Turris 1.0 and 1.1 are open source routers, they have dual-core > > PowerPC Freescale P2020 CPU and are based on Freescale P2020RDB-PC-A board. > > Hardware design is fully open source, all firmware and hardware design > > files are available at Turris project website: > > > > https://docs.turris.cz/hw/turris-1x/turris-1x/ > > https://project.turris.cz/en/hardware.html > > > > Signed-off-by: Pali Rohár <pali@kernel.org> > > --- > > arch/powerpc/boot/dts/turris1x.dts | 470 +++++++++++++++++++++++++++++ > > 1 file changed, 470 insertions(+) > > create mode 100644 arch/powerpc/boot/dts/turris1x.dts > > The headers say you Cc'ed this to the devicetree list, but I don't see > it in the devicetree patchwork: > > https://patchwork.ozlabs.org/project/devicetree-bindings/list/?state=*&q=turris&archive=both
Email is on the devicetree list: https://lore.kernel.org/linux-devicetree/20220511143712.22550-1-pali@kernel.org/
> Which means it hasn't been run through Rob's CI scripts. > > Maybe try a resend? > > cheers
| |