lkml.org 
[lkml]   [2022]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v12 2/5] arm64: dts: qcom: sc7180: Add quackingstick dts files
Date
Quackingstick is a trogdor-based board. These dts files are copies from
the downstream Chrome OS 5.4 kernel, but with downstream bits removed.

Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>

---

(no changes since v8)

Changes in v8:
- Incorporate the deletion of the usb_c1 node from 9f9fb70a7294.

Changes in v7:
- Restore changes requested by Doug.
- Only include sc7180.dtsi in sc7180-trogdor.dtsi (19794489fa24).
- Simplify spi0/spi6 labeling (d277cab7afc7).
- Simplify trackpad enabling (51d30402be75).

Changes in v6:
- Accidentally deleted changes requested by Doug.

Changes in v5:
- Remove extra newline
- Add comment that compatible will be filled in per-board

Changes in v4:
- Add missing version history

Changes in v3:
- First inclusion in this series

arch/arm64/boot/dts/qcom/Makefile | 2 +
.../sc7180-trogdor-quackingstick-r0-lte.dts | 38 +++
.../qcom/sc7180-trogdor-quackingstick-r0.dts | 26 ++
.../qcom/sc7180-trogdor-quackingstick.dtsi | 318 ++++++++++++++++++
4 files changed, 384 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index e4114e22548a..7268086f66e8 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -81,6 +81,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
new file mode 100644
index 000000000000..35e8945fc56d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x600 => 1536
+ * - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+#include "sc7180-trogdor-quackingstick-r0.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Quackingstick (rev0+) with LTE";
+ compatible = "google,quackingstick-sku1536", "qcom,sc7180";
+};
+
+&ap_sar_sensor {
+ compatible = "semtech,sx9324";
+ semtech,ph0-pin = <3 1 3>;
+ semtech,ph1-pin = <2 1 2>;
+ semtech,ph2-pin = <3 3 1>;
+ semtech,ph3-pin = <1 3 3>;
+ semtech,ph01-resolution = <1024>;
+ semtech,ph23-resolution = <1024>;
+ semtech,startup-sensor = <1>;
+ semtech,ph01-proxraw-strength = <3>;
+ semtech,ph23-proxraw-strength = <3>;
+ semtech,avg-pos-strength = <256>;
+
+ /delete-property/ svdd-supply;
+ vdd-supply = <&pp1800_prox>;
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
new file mode 100644
index 000000000000..5c81e44ed4a5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x601 => 1537
+ * - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+#include "sc7180-trogdor-quackingstick.dtsi"
+
+/ {
+ model = "Google Quackingstick (rev0+)";
+ compatible = "google,quackingstick-sku1537", "qcom,sc7180";
+};
+
+&dsi_phy {
+ qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
+ qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
+ qcom,phy-drive-ldo-level = <375>;
+};
+
+&panel {
+ compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
new file mode 100644
index 000000000000..574b78eb4f28
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+
+/* This board only has 1 USB Type-C port. */
+/delete-node/ &usb_c1;
+
+/ {
+ ppvar_lcd: ppvar-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_lcd";
+
+ gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ppvar_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ v1p8_disp: v1p8-disp {
+ compatible = "regulator-fixed";
+ regulator-name = "v1p8_disp";
+
+ gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp1800_disp_on>;
+
+ vin-supply = <&pp3300_a>;
+ };
+};
+
+&backlight {
+ pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+ status = "okay";
+};
+
+&dsi0 {
+ panel: panel@0 {
+ /* Compatible will be filled in per-board */
+ reg = <0>;
+ enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rst>;
+ avdd-supply = <&ppvar_lcd>;
+ pp1800-supply = <&v1p8_disp>;
+ pp3300-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ rotation = <270>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&gpio_keys {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+ post-power-on-delay-ms = <20>;
+ hid-descr-addr = <0x0001>;
+
+ vdd-supply = <&pp3300_ts>;
+ };
+};
+
+&sdhc_2 {
+ status = "okay";
+};
+
+&pp1800_uf_cam {
+ status = "okay";
+};
+
+&pp1800_wf_cam {
+ status = "okay";
+};
+
+&pp2800_uf_cam {
+ status = "okay";
+};
+
+&pp2800_wf_cam {
+ status = "okay";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio67";
+ };
+
+ pinconf {
+ pins = "gpio67";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "HUB_RST_L",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "UF_CAM_EN",
+ "WF_CAM_EN",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "",
+ "AP_EDP_BKLTEN",
+ "UF_CAM_MCLK",
+ "WF_CAM_CLK",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "UF_CAM_SDA",
+ "UF_CAM_SCL",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "",
+ "",
+ "AMP_EN",
+ "P_SENSOR_INT_L",
+ "AP_SAR_SENSOR_SDA",
+ "AP_SAR_SENSOR_SCL",
+ "",
+ "HP_IRQ",
+ "WF_CAM_RST_L",
+ "UF_CAM_RST_L",
+ "AP_BRD_ID2",
+ "",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+ "",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "",
+ "",
+ "AMP_DIN",
+ "PEN_DET_ODL",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "EN_PP3300_DX_EDP",
+ "AP_SPI_CS0_L",
+ "SD_CD_ODL",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT_L",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "",
+ "PP1800_DISP_ON",
+ "LCD_RST",
+ "PPVAR_LCD_EN",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_I2C_SDA",
+ "AP_TS_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+
+ lcd_rst: lcd-rst {
+ pinmux {
+ pins = "gpio87";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio87";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ ppvar_lcd_en: ppvar-lcd-en {
+ pinmux {
+ pins = "gpio88";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio88";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ pp1800_disp_on: pp1800-disp-on {
+ pinmux {
+ pins = "gpio86";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio86";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
--
2.31.0
\
 
 \ /
  Last update: 2022-06-25 02:15    [W:0.046 / U:5.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site