lkml.org 
[lkml]   [2022]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/7] media: ov5693: move hw cfg functions into ov5693_check_hwcfg
Date
Move hw configuration functions into ov5693_check_hwcfg. This is done to
separe the code that handle the hw cfg from probe in a clean way

Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
---
drivers/media/i2c/ov5693.c | 53 +++++++++++++++++++++++---------------
1 file changed, 32 insertions(+), 21 deletions(-)

diff --git a/drivers/media/i2c/ov5693.c b/drivers/media/i2c/ov5693.c
index d2adc5513a21..d5a934ace597 100644
--- a/drivers/media/i2c/ov5693.c
+++ b/drivers/media/i2c/ov5693.c
@@ -1348,6 +1348,38 @@ static int ov5693_check_hwcfg(struct ov5693_device *ov5693)
struct fwnode_handle *endpoint;
unsigned int i;
int ret;
+ u32 xvclk_rate;
+
+ ov5693->xvclk = devm_clk_get(ov5693->dev, "xvclk");
+ if (IS_ERR(ov5693->xvclk))
+ return dev_err_probe(ov5693->dev, PTR_ERR(ov5693->xvclk),
+ "failed to get xvclk: %ld\n",
+ PTR_ERR(ov5693->xvclk));
+
+ if (ov5693->xvclk) {
+ xvclk_rate = clk_get_rate(ov5693->xvclk);
+ } else {
+ ret = fwnode_property_read_u32(fwnode, "clock-frequency",
+ &xvclk_rate);
+
+ if (ret) {
+ dev_err(ov5693->dev, "can't get clock frequency");
+ return ret;
+ }
+ }
+
+ if (xvclk_rate != OV5693_XVCLK_FREQ)
+ dev_warn(ov5693->dev, "Found clk freq %u, expected %u\n",
+ xvclk_rate, OV5693_XVCLK_FREQ);
+
+ ret = ov5693_configure_gpios(ov5693);
+ if (ret)
+ return ret;
+
+ ret = ov5693_get_regulators(ov5693);
+ if (ret)
+ return dev_err_probe(ov5693->dev, ret,
+ "Error fetching regulators\n");

endpoint = fwnode_graph_get_next_endpoint(fwnode, NULL);
if (!endpoint)
@@ -1390,7 +1422,6 @@ static int ov5693_check_hwcfg(struct ov5693_device *ov5693)
static int ov5693_probe(struct i2c_client *client)
{
struct ov5693_device *ov5693;
- u32 xvclk_rate;
int ret = 0;

ov5693 = devm_kzalloc(&client->dev, sizeof(*ov5693), GFP_KERNEL);
@@ -1408,26 +1439,6 @@ static int ov5693_probe(struct i2c_client *client)

v4l2_i2c_subdev_init(&ov5693->sd, client, &ov5693_ops);

- ov5693->xvclk = devm_clk_get(&client->dev, "xvclk");
- if (IS_ERR(ov5693->xvclk)) {
- dev_err(&client->dev, "Error getting clock\n");
- return PTR_ERR(ov5693->xvclk);
- }
-
- xvclk_rate = clk_get_rate(ov5693->xvclk);
- if (xvclk_rate != OV5693_XVCLK_FREQ)
- dev_warn(&client->dev, "Found clk freq %u, expected %u\n",
- xvclk_rate, OV5693_XVCLK_FREQ);
-
- ret = ov5693_configure_gpios(ov5693);
- if (ret)
- return ret;
-
- ret = ov5693_get_regulators(ov5693);
- if (ret)
- return dev_err_probe(&client->dev, ret,
- "Error fetching regulators\n");
-
ov5693->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
ov5693->pad.flags = MEDIA_PAD_FL_SOURCE;
ov5693->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
--
2.25.1
\
 
 \ /
  Last update: 2022-06-25 01:05    [W:0.105 / U:4.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site