lkml.org 
[lkml]   [2022]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] phy: qcom-qmp-pcie: drop obsolete pipe clock type check
Date
Drop the obsolete pipe clock handling which was used to treat the pipe
clock as optional for types other than PCIe and USB and which is no
longer needed since splitting the PHY driver.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 19 ++-----------------
1 file changed, 2 insertions(+), 17 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index b2cd0cf965d8..385ea3d8de08 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -2210,26 +2210,11 @@ int qcom_qmp_phy_pcie_create(struct device *dev, struct device_node *np, int id,
if (!qphy->pcs_misc)
dev_vdbg(dev, "PHY pcs_misc-reg not used\n");

- /*
- * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
- * based phys, so they essentially have pipe clock. So,
- * we return error in case phy is USB3 or PIPE type.
- * Otherwise, we initialize pipe clock to NULL for
- * all phys that don't need this.
- */
snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
if (IS_ERR(qphy->pipe_clk)) {
- if (cfg->type == PHY_TYPE_PCIE ||
- cfg->type == PHY_TYPE_USB3) {
- ret = PTR_ERR(qphy->pipe_clk);
- if (ret != -EPROBE_DEFER)
- dev_err(dev,
- "failed to get lane%d pipe_clk, %d\n",
- id, ret);
- return ret;
- }
- qphy->pipe_clk = NULL;
+ return dev_err_probe(dev, PTR_ERR(qphy->pipe_clk),
+ "failed to get lane%d pipe clock\n", id);
}

generic_phy = devm_phy_create(dev, np, &qcom_qmp_phy_pcie_ops);
--
2.35.1
\
 
 \ /
  Last update: 2022-06-23 13:35    [W:0.442 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site