lkml.org 
[lkml]   [2022]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v21 1/5] fpga: fpga-mgr: support bitstream offset in image buffer
On Tue, Jun 21, 2022 at 06:38:43PM +0300, Ivan Bornyakov wrote:
> At the moment FPGA manager core loads to the device entire image
> provided to fpga_mgr_load(). But it is not always whole FPGA image
> buffer meant to be written to the device. In particular, .dat formatted
> image for Microchip MPF contains meta info in the header that is not
> meant to be written to the device. This is issue for those low level
> drivers that loads data to the device with write() fpga_manager_ops
> callback, since write() can be called in iterator over scatter-gather
> table, not only linear image buffer. On the other hand, write_sg()
> callback is provided with whole image in scatter-gather form and can
> decide itself which part should be sent to the device.
>
> Add header_size and data_size to the fpga_image_info struct, add
> skip_header to the fpga_manager_ops struct and adjust fpga_mgr_write()
> callers with respect to them.
>
> * info->header_size indicates part at the beginning of image buffer
> that contains some meta info. It is optional and can be 0,
> initialized with mops->initial_header_size.
>
> * mops->skip_header tells fpga-mgr core whether write should start
> from the beginning of image buffer or at the offset of header_size.
>
> * info->data_size is the size of bitstream data that is meant to be
> written to the device. It is also optional and can be 0, which
> means bitstream data is up to the end of image buffer.
>
> Also add parse_header() callback to fpga_manager_ops, which purpose is
> to set info->header_size and info->data_size. At least
> initial_header_size bytes of image buffer will be passed into
> parse_header() first time. If it is not enough, parse_header() should
> set desired size into info->header_size and return -EAGAIN, then it will
> be called again with greater part of image buffer on the input.
>
> Suggested-by: Xu Yilun <yilun.xu@intel.com>
> Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
> ---
> drivers/fpga/fpga-mgr.c | 225 ++++++++++++++++++++++++++++++----
> include/linux/fpga/fpga-mgr.h | 24 +++-
> 2 files changed, 222 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/fpga/fpga-mgr.c b/drivers/fpga/fpga-mgr.c
> index 08dc85fcd511..d97df0bdc72b 100644
> --- a/drivers/fpga/fpga-mgr.c
> +++ b/drivers/fpga/fpga-mgr.c
> @@ -74,6 +74,15 @@ static inline int fpga_mgr_write_complete(struct fpga_manager *mgr,
> return 0;
> }
>
> +static inline int fpga_mgr_parse_header(struct fpga_manager *mgr,
> + struct fpga_image_info *info,
> + const char *buf, size_t count)
> +{
> + if (mgr->mops->parse_header)
> + return mgr->mops->parse_header(mgr, info, buf, count);
> + return 0;
> +}
> +
> static inline int fpga_mgr_write_init(struct fpga_manager *mgr,
> struct fpga_image_info *info,
> const char *buf, size_t count)
> @@ -136,24 +145,141 @@ void fpga_image_info_free(struct fpga_image_info *info)
> EXPORT_SYMBOL_GPL(fpga_image_info_free);
>
> /*
> - * Call the low level driver's write_init function. This will do the
> + * Call the low level driver's parse_header function with entire FPGA image
> + * buffer on the input. This will set info->header_size and info->data_size.
> + */
> +static int fpga_mgr_parse_header_mapped(struct fpga_manager *mgr,
> + struct fpga_image_info *info,
> + const char *buf, size_t count)
> +{
> + int ret;
> +
> + mgr->state = FPGA_MGR_STATE_PARSE_HEADER;
> + ret = fpga_mgr_parse_header(mgr, info, buf, count);
> +
> + if (info->header_size + info->data_size > count) {
> + dev_err(&mgr->dev, "Bitsream data outruns FPGA image\n");
> + ret = -EINVAL;
> + }
> +
> + if (ret) {
> + dev_err(&mgr->dev, "Error while parsing FPGA image header\n");
> + mgr->state = FPGA_MGR_STATE_PARSE_HEADER_ERR;
> + }
> +
> + return ret;
> +}
> +
> +/*
> + * Call the low level driver's parse_header function with first fragment of
> + * scattered FPGA image on the input. If header fits first fragment,
> + * parse_header will set info->header_size and info->data_size. If it is not,
> + * parse_header will set desired size to info->header_size and -EAGAIN will be
> + * returned.
> + */
> +static int fpga_mgr_parse_header_sg_first(struct fpga_manager *mgr,
> + struct fpga_image_info *info,
> + struct sg_table *sgt)
> +{
> + struct sg_mapping_iter miter;
> + int ret;
> +
> + mgr->state = FPGA_MGR_STATE_PARSE_HEADER;
> +
> + sg_miter_start(&miter, sgt->sgl, sgt->nents, SG_MITER_FROM_SG);
> + if (sg_miter_next(&miter) &&
> + miter.length >= info->header_size)
> + ret = fpga_mgr_parse_header(mgr, info, miter.addr, miter.length);
> + else
> + ret = -EAGAIN;
> + sg_miter_stop(&miter);
> +
> + if (ret && ret != -EAGAIN) {
> + dev_err(&mgr->dev, "Error while parsing FPGA image header\n");
> + mgr->state = FPGA_MGR_STATE_PARSE_HEADER_ERR;
> + }
> +
> + return ret;
> +}
> +
> +/*
> + * Copy scattered FPGA image fragments to temporary buffer and call the
> + * low level driver's parse_header function. This should be called after
> + * fpga_mgr_parse_header_sg_first() returned -EAGAIN. In case of success,
> + * pointer to the newly allocated image header copy will be returned and
> + * its size will be set into *ret_size. Returned buffer needs to be freed.
> + */
> +static void *fpga_mgr_parse_header_sg(struct fpga_manager *mgr,
> + struct fpga_image_info *info,
> + struct sg_table *sgt, size_t *ret_size)
> +{
> + size_t len, new_header_size, header_size = 0;
> + char *new_buf, *buf = NULL;
> + int ret;
> +
> + do {
> + new_header_size = info->header_size;
> + if (new_header_size <= header_size) {
> + dev_err(&mgr->dev, "Requested invalid header size\n");
> + ret = -EFAULT;
> + break;
> + }
> +
> + new_buf = krealloc(buf, new_header_size, GFP_KERNEL);
> + if (!new_buf) {
> + ret = -ENOMEM;
> + break;
> + }
> +
> + buf = new_buf;
> +
> + len = sg_pcopy_to_buffer(sgt->sgl, sgt->nents,
> + buf + header_size,
> + new_header_size - header_size,
> + header_size);
> + if (len != new_header_size - header_size) {
> + ret = -EFAULT;
> + break;
> + }
> +
> + header_size = new_header_size;
> + ret = fpga_mgr_parse_header(mgr, info, buf, header_size);
> + } while (ret == -EAGAIN);
> +
> + if (ret) {
> + dev_err(&mgr->dev, "Error while parsing FPGA image header\n");
> + mgr->state = FPGA_MGR_STATE_PARSE_HEADER_ERR;
> + kfree(buf);
> + buf = ERR_PTR(ret);
> + }
> +
> + *ret_size = header_size;
> +
> + return buf;
> +}
> +
> +/*
> + * Call the low level driver's write_init function. This will do the
> * device-specific things to get the FPGA into the state where it is ready to
> - * receive an FPGA image. The low level driver only gets to see the first
> - * initial_header_size bytes in the buffer.
> + * receive an FPGA image. The low level driver gets to see at least first
> + * info->header_size bytes in the buffer. If info->header_size is 0,
> + * write_init will not get any bytes of image buffer.
> */
> static int fpga_mgr_write_init_buf(struct fpga_manager *mgr,
> struct fpga_image_info *info,
> const char *buf, size_t count)
> {
> + size_t header_size = info->header_size;
> int ret;
>
> mgr->state = FPGA_MGR_STATE_WRITE_INIT;
> - if (!mgr->mops->initial_header_size) {
> +
> + if (header_size > count)
> + ret = -EINVAL;
> + else if (!header_size)
> ret = fpga_mgr_write_init(mgr, info, NULL, 0);
> - } else {
> - count = min(mgr->mops->initial_header_size, count);
> + else
> ret = fpga_mgr_write_init(mgr, info, buf, count);
> - }
>
> if (ret) {
> dev_err(&mgr->dev, "Error preparing FPGA for writing\n");
> @@ -164,39 +290,50 @@ static int fpga_mgr_write_init_buf(struct fpga_manager *mgr,
> return 0;
> }
>
> -static int fpga_mgr_write_init_sg(struct fpga_manager *mgr,
> - struct fpga_image_info *info,
> - struct sg_table *sgt)
> +static int fpga_mgr_prepare_sg(struct fpga_manager *mgr,
> + struct fpga_image_info *info,
> + struct sg_table *sgt)
> {
> struct sg_mapping_iter miter;
> size_t len;
> char *buf;
> int ret;
>
> - if (!mgr->mops->initial_header_size)
> + /* Short path. Low level driver don't care about image header. */
> + if (!mgr->mops->initial_header_size && !mgr->mops->parse_header)
> return fpga_mgr_write_init_buf(mgr, info, NULL, 0);
>
> /*
> * First try to use miter to map the first fragment to access the
> * header, this is the typical path.
> */
> - sg_miter_start(&miter, sgt->sgl, sgt->nents, SG_MITER_FROM_SG);
> - if (sg_miter_next(&miter) &&
> - miter.length >= mgr->mops->initial_header_size) {
> - ret = fpga_mgr_write_init_buf(mgr, info, miter.addr,
> - miter.length);
> + ret = fpga_mgr_parse_header_sg_first(mgr, info, sgt);
> + /* If 0, header fits first fragment, call write_init on it */
> + if (!ret) {
> + sg_miter_start(&miter, sgt->sgl, sgt->nents, SG_MITER_FROM_SG);
> + if (sg_miter_next(&miter)) {
> + ret = fpga_mgr_write_init_buf(mgr, info, miter.addr,
> + miter.length);
> + sg_miter_stop(&miter);
> + return ret;
> + }
> sg_miter_stop(&miter);
> + /*
> + * If -EAGAIN, more sg buffer is needed,
> + * otherwise an error has occurred.
> + */
> + } else if (ret != -EAGAIN) {
> return ret;
> }
> - sg_miter_stop(&miter);
>
> - /* Otherwise copy the fragments into temporary memory. */
> - buf = kmalloc(mgr->mops->initial_header_size, GFP_KERNEL);
> - if (!buf)
> - return -ENOMEM;
> + /*
> + * Copy the fragments into temporary memory.
> + * Copying is done inside fpga_mgr_parse_header_sg().
> + */
> + buf = fpga_mgr_parse_header_sg(mgr, info, sgt, &len);
> + if (IS_ERR(buf))
> + return PTR_ERR(buf);
>
> - len = sg_copy_to_buffer(sgt->sgl, sgt->nents, buf,
> - mgr->mops->initial_header_size);
> ret = fpga_mgr_write_init_buf(mgr, info, buf, len);
>
> kfree(buf);
> @@ -227,7 +364,7 @@ static int fpga_mgr_buf_load_sg(struct fpga_manager *mgr,
> {
> int ret;
>
> - ret = fpga_mgr_write_init_sg(mgr, info, sgt);
> + ret = fpga_mgr_prepare_sg(mgr, info, sgt);
> if (ret)
> return ret;
>
> @@ -236,17 +373,37 @@ static int fpga_mgr_buf_load_sg(struct fpga_manager *mgr,
> if (mgr->mops->write_sg) {
> ret = fpga_mgr_write_sg(mgr, sgt);
> } else {
> + size_t length, data_size = info->data_size;
> struct sg_mapping_iter miter;
> + ssize_t count = 0;
>
> sg_miter_start(&miter, sgt->sgl, sgt->nents, SG_MITER_FROM_SG);
> +
> + if (mgr->mops->skip_header &&
> + !sg_miter_skip(&miter, info->header_size)) {
> + ret = -EINVAL;
> + sg_miter_stop(&miter);

Seems sg_miter_stop is not need if sg_miter_skip reaches end, is it?

Thanks,
Yilun

> + goto out;
> + }
> +
> while (sg_miter_next(&miter)) {
> - ret = fpga_mgr_write(mgr, miter.addr, miter.length);
> + if (data_size)
> + length = min(miter.length, data_size - count);
> + else
> + length = miter.length;
> +
> + ret = fpga_mgr_write(mgr, miter.addr, length);
> if (ret)
> break;
> +
> + count += length;
> + if (data_size && count >= data_size)
> + break;
> }
> sg_miter_stop(&miter);
> }
>
> +out:
> if (ret) {
> dev_err(&mgr->dev, "Error while writing image data to FPGA\n");
> mgr->state = FPGA_MGR_STATE_WRITE_ERR;
> @@ -262,10 +419,22 @@ static int fpga_mgr_buf_load_mapped(struct fpga_manager *mgr,
> {
> int ret;
>
> + ret = fpga_mgr_parse_header_mapped(mgr, info, buf, count);
> + if (ret)
> + return ret;
> +
> ret = fpga_mgr_write_init_buf(mgr, info, buf, count);
> if (ret)
> return ret;
>
> + if (mgr->mops->skip_header) {
> + buf += info->header_size;
> + count -= info->header_size;
> + }
> +
> + if (info->data_size)
> + count = info->data_size;
> +
> /*
> * Write the FPGA image to the FPGA.
> */
> @@ -404,6 +573,8 @@ static int fpga_mgr_firmware_load(struct fpga_manager *mgr,
> */
> int fpga_mgr_load(struct fpga_manager *mgr, struct fpga_image_info *info)
> {
> + info->header_size = mgr->mops->initial_header_size;
> +
> if (info->sgt)
> return fpga_mgr_buf_load_sg(mgr, info, info->sgt);
> if (info->buf && info->count)
> @@ -424,6 +595,10 @@ static const char * const state_str[] = {
> [FPGA_MGR_STATE_FIRMWARE_REQ] = "firmware request",
> [FPGA_MGR_STATE_FIRMWARE_REQ_ERR] = "firmware request error",
>
> + /* Parse FPGA image header */
> + [FPGA_MGR_STATE_PARSE_HEADER] = "parse header",
> + [FPGA_MGR_STATE_PARSE_HEADER_ERR] = "parse header error",
> +
> /* Preparing FPGA to receive image */
> [FPGA_MGR_STATE_WRITE_INIT] = "write init",
> [FPGA_MGR_STATE_WRITE_INIT_ERR] = "write init error",
> diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h
> index 0f9468771bb9..54f63459efd6 100644
> --- a/include/linux/fpga/fpga-mgr.h
> +++ b/include/linux/fpga/fpga-mgr.h
> @@ -22,6 +22,8 @@ struct sg_table;
> * @FPGA_MGR_STATE_RESET: FPGA in reset state
> * @FPGA_MGR_STATE_FIRMWARE_REQ: firmware request in progress
> * @FPGA_MGR_STATE_FIRMWARE_REQ_ERR: firmware request failed
> + * @FPGA_MGR_STATE_PARSE_HEADER: parse FPGA image header
> + * @FPGA_MGR_STATE_PARSE_HEADER_ERR: Error during PARSE_HEADER stage
> * @FPGA_MGR_STATE_WRITE_INIT: preparing FPGA for programming
> * @FPGA_MGR_STATE_WRITE_INIT_ERR: Error during WRITE_INIT stage
> * @FPGA_MGR_STATE_WRITE: writing image to FPGA
> @@ -41,7 +43,9 @@ enum fpga_mgr_states {
> FPGA_MGR_STATE_FIRMWARE_REQ,
> FPGA_MGR_STATE_FIRMWARE_REQ_ERR,
>
> - /* write sequence: init, write, complete */
> + /* write sequence: parse header, init, write, complete */
> + FPGA_MGR_STATE_PARSE_HEADER,
> + FPGA_MGR_STATE_PARSE_HEADER_ERR,
> FPGA_MGR_STATE_WRITE_INIT,
> FPGA_MGR_STATE_WRITE_INIT_ERR,
> FPGA_MGR_STATE_WRITE,
> @@ -85,6 +89,9 @@ enum fpga_mgr_states {
> * @sgt: scatter/gather table containing FPGA image
> * @buf: contiguous buffer containing FPGA image
> * @count: size of buf
> + * @header_size: size of image header.
> + * @data_size: size of image data to be sent to the device. If not specified,
> + * whole image will be used. Header may be skipped in either case.
> * @region_id: id of target region
> * @dev: device that owns this
> * @overlay: Device Tree overlay
> @@ -98,6 +105,8 @@ struct fpga_image_info {
> struct sg_table *sgt;
> const char *buf;
> size_t count;
> + size_t header_size;
> + size_t data_size;
> int region_id;
> struct device *dev;
> #ifdef CONFIG_OF
> @@ -137,9 +146,16 @@ struct fpga_manager_info {
>
> /**
> * struct fpga_manager_ops - ops for low level fpga manager drivers
> - * @initial_header_size: Maximum number of bytes that should be passed into write_init
> + * @initial_header_size: minimum number of bytes that should be passed into
> + * parse_header and write_init.
> + * @skip_header: bool flag to tell fpga-mgr core whether it should skip
> + * info->header_size part at the beginning of the image when invoking
> + * write callback.
> * @state: returns an enum value of the FPGA's state
> * @status: returns status of the FPGA, including reconfiguration error code
> + * @parse_header: parse FPGA image header to set info->header_size and
> + * info->data_size. In case the input buffer is not large enough, set
> + * required size to info->header_size and return -EAGAIN.
> * @write_init: prepare the FPGA to receive configuration data
> * @write: write count bytes of configuration data to the FPGA
> * @write_sg: write the scatter list of configuration data to the FPGA
> @@ -153,8 +169,12 @@ struct fpga_manager_info {
> */
> struct fpga_manager_ops {
> size_t initial_header_size;
> + bool skip_header;
> enum fpga_mgr_states (*state)(struct fpga_manager *mgr);
> u64 (*status)(struct fpga_manager *mgr);
> + int (*parse_header)(struct fpga_manager *mgr,
> + struct fpga_image_info *info,
> + const char *buf, size_t count);
> int (*write_init)(struct fpga_manager *mgr,
> struct fpga_image_info *info,
> const char *buf, size_t count);
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2022-06-23 11:37    [W:0.164 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site