lkml.org 
[lkml]   [2022]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] libata: add horkage for M88V29
From
2022. 06. 23. 9:47 keltezéssel, Böszörményi Zoltán írta:
> 2022. 02. 08. 9:07 keltezéssel, Damien Le Moal írta:
>> On 2/4/22 21:57, zboszor@pr.hu wrote:
>>> From: Zoltán Böszörményi <zboszor@gmail.com>
>>>
>>> This device is a CF card, or possibly an SSD in CF form factor.
>>> It supports NCQ and high speed DMA.
>>>
>>> While it also advertises TRIM support, I/O errors are reported
>>> when the discard mount option fstrim is used. TRIM also fails
>>> when disabling NCQ and not just as an NCQ command.
>>>
>>> TRIM must be disabled for this device.
>>>
>>> Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
>>> ---
>>>   drivers/ata/libata-core.c | 1 +
>>>   1 file changed, 1 insertion(+)
>>>
>>> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
>>> index 67f88027680a..4a7f58fcc411 100644
>>> --- a/drivers/ata/libata-core.c
>>> +++ b/drivers/ata/libata-core.c
>>> @@ -4028,6 +4028,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
>>>       /* devices that don't properly handle TRIM commands */
>>>       { "SuperSSpeed S238*",        NULL,    ATA_HORKAGE_NOTRIM, },
>>> +    { "M88V29*",            NULL,    ATA_HORKAGE_NOTRIM, },
>>>       /*
>>>        * As defined, the DRAT (Deterministic Read After Trim) and RZAT
>> Applied to for-5.17-fixes. Thanks !
>
> Thank you. However, I have second thoughts about this patch.
> The device advertises this:
>
> # hdparm -iI /dev/sda
> ...
>  Enabled Supported
>     *    Data Set Management TRIM supported (limit 1 block)
> ...

Here's the complete hdparm output:

/dev/sda:

Model=M88V29 32GB, FwRev=181019i, SerialNo=20211023AA20A0656011
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/15/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=unknown, MaxMultSect=1, MultSect=off
CurCHS=16383/15/63, CurSects=15481935, LBA=yes, LBAsects=62533296
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: unknown setting
Drive conforms to: Unspecified: ATA/ATAPI-5,6,7

* signifies the current active mode


CompactFlash ATA device
Model Number: M88V29 32GB
Serial Number: 20211023AA20A0656011
Firmware Revision: 181019i
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 15 15
sectors/track 63 63
--
CHS current addressable sectors: 15481935
LBA user addressable sectors: 62533296
LBA48 user addressable sectors: 62533296
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 30533 MBytes
device size with M = 1000*1000: 32017 MBytes (32 GB)
cache/buffer size = unknown
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Vendor, with device specific minimum
R/W multiple sector transfer: Max = 1 Current = 0
Advanced power management level: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Look-ahead
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* CFA feature set
* Advanced Power Management feature set
* 48-bit Address feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* {READ,WRITE}_DMA_EXT_GPL commands
* DOWNLOAD MICROCODE DMA command
* Data Set Management TRIM supported (limit 1 block)
* Deterministic read data after TRIM
CFA max advanced io_udma cycle time: 80ns
CFA max advanced mem_udma cycle time: 80ns
* CFA advanced modes: pio5 pio6 mdma3 mdma4 io_udma4 io_udma5 io_udma6 io_udma7
io_udma8 *io_udma9 mem_udma4 mem_udma5 mem_udma6 mem_udma7 mem_udma8 *mem_udma9
CFA Power Level 1 not supported (max 100mA)
Security:
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
4min for SECURITY ERASE UNIT. 4min for ENHANCED SECURITY ERASE UNIT.
HW reset results:
CBLID- above Vih
Device num = 0
Checksum: correct

>
> but the I/O failures always reported higher number of blocks,
> IIRC the attempted number of block was 8 or so.
>
> Can the kernel limit or split TRIM commands according to the
> advertised limit? If not (or not yet) then the quirk is good for now.
>
> Best regards,
> Zoltán Böszörményi
>

\
 
 \ /
  Last update: 2022-06-23 10:14    [W:0.958 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site