lkml.org 
[lkml]   [2022]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 02/17] regmap-irq: Add get_irq_reg to support unusual register layouts
Date

Matti Vaittinen <mazziesaccount@gmail.com> writes:

> Hi dee Ho peeps!
>
> Sorry for the late reply.
>
> pe 10. kesäk. 2022 klo 18.43 Aidan MacDonald
> (aidanmacdonald.0x0@gmail.com) kirjoitti:
>>
>> Mark Brown <broonie@kernel.org> writes:
>>
>> > On Tue, Jun 07, 2022 at 04:53:09PM +0100, Aidan MacDonald wrote:
>> >
>> >> - if (!chip->sub_reg_offsets || !chip->not_fixed_stride) {
>> >> + if (chip->get_irq_reg) {
>> >> + reg = chip->get_irq_reg(base_reg, i);
>> >> + } else if (!chip->sub_reg_offsets || !chip->not_fixed_stride) {
>> >
>> > It seems like it would be cleaner and clearer to refactor things so that
>> > we always have a get_irq_reg() with standard chips getting given a
>> > default implementation which implements the current behaviour.
>>
>> I don't think that is a good way to clean things up. I only intended
>> get_irq_reg() to be a quick hack to solve a problem; in my opinion it
>> would be a poor abstraction to base the API around.
>>
>> What I'd suggest is something that will simplify regmap-irq. Instead of
>> defining the base registers, etc. in the chip, introduce a new struct
>> to describe a register group:
>>
>> struct regmap_irq_reg_group {
>> unsigned int status_base;
>> unsigned int mask_base;
>> ...
>>
>> unsigned int irq_reg_stride;
>>
>> int num_regs;
>> };
>>
>> The idea is that the registers in a group are linearly mapped using the
>> formula "base + (i * irq_reg_stride)". Then it's possible to allow for
>> multiple register groups in regmap_irq_chip:
>>
>> struct regmap_irq_chip {
>> const struct regmap_irq_reg_group *groups;
>> unsigned int num_groups;
>>
>> unsigned int main_status_base;
>> unsigned int num_main_status_bits;
>> int num_main_regs;
>>
>> ...
>> };
>>
>> It should be straightforward to fit existing chips into this model.
>>
>> - Chips that use a main status + sub-block IRQ layout will define
>> one register group for each sub-block and continue to describe the
>> location of the main status registers inside of regmap_irq_chip.
>> A group will only get polled if the corresponding main status bit
>> is set -- n'th group is polled if n'th bit is set.
>
> Does this work for devices where a single main status bit can flag
> IRQs in more than one sub-registers?
>
> Best Regards
> -- Matti

No, I realized once I got into the refactor that what I outlined here
wouldn't fit that use case well, which is what rohm-bd71828 needs.

There are some other complications with this approach, like how to
go between IRQs and register groups efficiently, and it's generally
a rather heavyweight solution. It might be useful for handling very
hierarchical chips, but I couldn't justify the added complexity when
most chips don't need it -- after all most chips behind slow busses
will have a small number of interrupts and a fairly flat structure.

In the end I went with Mark's suggestion to factor things out around
->get_irq_reg(). At first I thought there might be too many "gotchas"
that'd limit its usefulness, but in the end it proved to be a better
option and a lot easier to implement.

\
 
 \ /
  Last update: 2022-06-23 22:35    [W:0.074 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site