lkml.org 
[lkml]   [2022]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V11 3/8] PCI: Create PCI library functions in support of DOE mailboxes.
Ira Weiny wrote:
> On Wed, Jun 22, 2022 at 03:57:34PM -0700, Dan Williams wrote:
> > Ira Weiny wrote:
> > > On Fri, Jun 17, 2022 at 03:56:38PM -0700, Dan Williams wrote:
> > [..]
> > > > > +static int pci_doe_discovery(struct pci_doe_mb *doe_mb, u8 *index, u16 *vid,
> > > > > + u8 *protocol)
> > > > > +{
> > > > > + u32 request_pl = FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX,
> > > > > + *index);
> > > > > + u32 response_pl;
> > > > > + DECLARE_COMPLETION_ONSTACK(c);
> > > > > + struct pci_doe_task task = {
> > > > > + .prot.vid = PCI_VENDOR_ID_PCI_SIG,
> > > > > + .prot.type = PCI_DOE_PROTOCOL_DISCOVERY,
> > > > > + .request_pl = &request_pl,
> > > > > + .request_pl_sz = sizeof(request_pl),
> > > > > + .response_pl = &response_pl,
> > > > > + .response_pl_sz = sizeof(response_pl),
> > > > > + .complete = pci_doe_task_complete,
> > > > > + .private = &c,
> > > > > + };
> > > > > + int ret;
> > > > > +
> > > > > + ret = pci_doe_submit_task(doe_mb, &task);
> > > > > + if (ret < 0)
> > > > > + return ret;
> > > > > +
> > > > > + wait_for_completion(&c);
> > > >
> > > > Another place where the need for a completion can be replaced with
> > > > flush_work().
> > >
> > > No not here. While this call is internal it is actually acting like an
> > > external caller. This specific wait is for that response to get back.
> > >
> > > This pattern was specifically asked for by you. Previously Jonathan had a
> > > synchronous call which took care of this but you said let all callers just
> > > handle it themselves. So all callers submit a task and if they want to wait
> > > for the response they have to do so themselves.
> >
> > Ah, true I remember that. The nice thing about a doing your own
> > wait_for_completion() like this is that you can make it
> > wait_for_completion_interruptible() to give up on the DOE if it gets
> > stalled. However, if you have a work item per-task and you're willing to
> > do an uninterruptible sleep, then flush_work(&task->work) is identical.
>
> So when you mentioned a work item per task I really jumped on that idea. But I
> realize now that it is a bit more complicated than that.
>
> Currently a work item is actually one step of the state machine. The state
> machine queues the next step of work as a new work item.
>
> I'm going to have to change the state machine quite a bit. I still agree with
> the one work item per task but it is going to take a bit of work to get the
> state machine to operate within that single task.
>
> I don't like what might result if I layer a work queue on top of using the
> system work queue for the individual steps of the state machine. So stay
> tuned.

In the end only one workqueue should exist either a task queue (my first
preference) or a device-state queue (if the task queue turns out not to
fit), but neither of those use cases should be glomming onto the
unbounded system_wq. Keep it simple with a dedicated ordered queue.

\
 
 \ /
  Last update: 2022-06-23 21:04    [W:0.131 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site