lkml.org 
[lkml]   [2022]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH V4 01/20] rv: Add Runtime Verification (RV) interface
Date
Hi Daniel,

A few flyby issues I noticed while going through the patches to
understand what RV offers.

For the typos, I wonder if it isn't better to use a spellcheck - they
unnecessarily detract from the review. Sorry for the annoyance!

Daniel Bristot de Oliveira <bristot@kernel.org> writes:

> RV is a lightweight (yet rigorous) method that complements classical
> exhaustive verification techniques (such as model checking and
> theorem proving) with a more practical approach to complex systems.
>
> RV works by analyzing the trace of the system's actual execution,
> comparing it against a formal specification of the system behavior.
> RV can give precise information on the runtime behavior of the
> monitored system while enabling the reaction for unexpected
> events, avoiding, for example, the propagation of a failure on
> safety-critical systems.
>
> The development of this interface roots in the development of the
> paper:
>
> DE OLIVEIRA, Daniel Bristot; CUCINOTTA, Tommaso; DE OLIVEIRA, Romulo
> Silva. Efficient formal verification for the Linux kernel. In:
> International Conference on Software Engineering and Formal Methods.
> Springer, Cham, 2019. p. 315-332.
>
> And:
>
> DE OLIVEIRA, Daniel Bristot, et al. Automata-based formal analysis
> and verification of the real-time Linux kernel. PhD Thesis, 2020.
>
> The RV interface resembles the tracing/ interface on purpose. The current
> path for the RV interface is /sys/kernel/tracing/rv/.
>
> It presents these files:
>
> "available_monitors"
> - List the available monitors, one per line.
>
> For example:
> [root@f32 rv]# cat available_monitors
> wip
> wwnr
>
> "enabled_monitors"
> - Lists the enabled monitors, one per line;
> - Writing to it enables a given monitor;
> - Writing a monitor name with a '-' prefix disables it;
> - Truncating the file disables all enabled monitors.
>
> For example:
> [root@f32 rv]# cat enabled_monitors
> [root@f32 rv]# echo wip > enabled_monitors
> [root@f32 rv]# echo wwnr >> enabled_monitors
> [root@f32 rv]# cat enabled_monitors
> wip
> wwnr
> [root@f32 rv]# echo !wip >> enabled_monitors
> [root@f32 rv]# cat enabled_monitors
> wwnr
> [root@f32 rv]# echo > enabled_monitors
> [root@f32 rv]# cat enabled_monitors
> [root@f32 rv]#
>
> Note that more than one monitor can be enabled concurrently.
>
> "monitoring_on"
> - It is an on/off general switcher for monitoring. Note
> that it does not disable enabled monitors, but stop the per-entity
> monitors of monitoring the events received from the system.
> It resambles the "tracing_on" switcher.

resembles
>
> "monitors/"
> Each monitor will have its one directory inside "monitors/". There
> the monitor specific files will be presented.
> The "monitors/" directory resambles the "events" directory on

resembles

... and in the rest of the file.

> tracefs.
>
> For example:
> [root@f32 rv]# cd monitors/wip/
> [root@f32 wip]# ls
> desc enable
> [root@f32 wip]# cat desc
> auto-generated wakeup in preemptive monitor.
> [root@f32 wip]# cat enable
> 0
>
> For further information, see the comments in the header of
> kernel/trace/rv/rv.c from this patch.
>
> Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: Will Deacon <will@kernel.org>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Marco Elver <elver@google.com>
> Cc: Dmitry Vyukov <dvyukov@google.com>
> Cc: "Paul E. McKenney" <paulmck@kernel.org>
> Cc: Shuah Khan <skhan@linuxfoundation.org>
> Cc: Gabriele Paoloni <gpaoloni@redhat.com>
> Cc: Juri Lelli <juri.lelli@redhat.com>
> Cc: Clark Williams <williams@redhat.com>
> Cc: linux-doc@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-trace-devel@vger.kernel.org
> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
> ---
> include/linux/rv.h | 23 ++
> include/linux/sched.h | 11 +
> include/rv/rv.h | 23 ++
> kernel/fork.c | 14 +
> kernel/trace/Kconfig | 2 +
> kernel/trace/Makefile | 2 +
> kernel/trace/rv/Kconfig | 12 +
> kernel/trace/rv/Makefile | 3 +
> kernel/trace/rv/rv.c | 738 +++++++++++++++++++++++++++++++++++++++
> kernel/trace/rv/rv.h | 34 ++
> kernel/trace/trace.c | 4 +
> kernel/trace/trace.h | 2 +
> 12 files changed, 868 insertions(+)
> create mode 100644 include/linux/rv.h
> create mode 100644 include/rv/rv.h
> create mode 100644 kernel/trace/rv/Kconfig
> create mode 100644 kernel/trace/rv/Makefile
> create mode 100644 kernel/trace/rv/rv.c
> create mode 100644 kernel/trace/rv/rv.h

[...]

> diff --git a/kernel/trace/rv/rv.c b/kernel/trace/rv/rv.c
> new file mode 100644
> index 000000000000..43af7b13187e
> --- /dev/null
> +++ b/kernel/trace/rv/rv.c
> @@ -0,0 +1,738 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * This is the online Runtime Verification (RV) interface.
> + *
> + * RV is a lightweight (yet rigorous) method that complements classical
> + * exhaustive verification techniques (such as model checking and
> + * theorem proving) with a more practical approach to complex systems.
> + *
> + * RV works by analyzing the trace of the system's actual execution,
> + * comparing it against a formal specification of the system behavior.
> + * RV can give precise information on the runtime behavior of the
> + * monitored system while enabling the reaction for unexpected
> + * events, avoiding, for example, the propagation of a failure on
> + * safety-critical systems.
> + *
> + * The development of this interface roots in the development of the
> + * paper:
> + *
> + * DE OLIVEIRA, Daniel Bristot; CUCINOTTA, Tommaso; DE OLIVEIRA, Romulo
> + * Silva. Efficient formal verification for the Linux kernel. In:
> + * International Conference on Software Engineering and Formal Methods.
> + * Springer, Cham, 2019. p. 315-332.
> + *
> + * And:
> + *
> + * DE OLIVEIRA, Daniel Bristot, et al. Automata-based formal analysis
> + * and verification of the real-time Linux kernel. PhD Thesis, 2020.
> + *
> + * == Runtime monitor interface ==
> + *
> + * A monitor is the central part of the runtime verification of a system.
> + *
> + * The monitor stands in between the formal specification of the desired
> + * (or undesired) behavior, and the trace of the actual system.
> + *
> + * In Linux terms, the runtime verification monitors are encapsulated
> + * inside the "RV monitor" abstraction. A RV monitor includes a reference
> + * model of the system, a set of instances of the monitor (per-cpu monitor,
> + * per-task monitor, and so on), and the helper functions that glue the
> + * monitor to the system via trace. Generally, a monitor includes some form
> + * of trace output as a reaction for event parsing and exceptions,
> + * as depicted bellow:
> + *
> + * Linux +----- RV Monitor ----------------------------------+ Formal
> + * Realm | | Realm
> + * +-------------------+ +----------------+ +-----------------+
> + * | Linux kernel | | Monitor | | Reference |
> + * | Tracing | -> | Instance(s) | <- | Model |
> + * | (instrumentation) | | (verification) | | (specification) |
> + * +-------------------+ +----------------+ +-----------------+
> + * | | |
> + * | V |
> + * | +----------+ |
> + * | | Reaction | |
> + * | +--+--+--+-+ |
> + * | | | | |
> + * | | | +-> trace output ? |
> + * +------------------------|--|----------------------+
> + * | +----> panic ?
> + * +-------> <user-specified>
> + *
> + * This file implements the interface for loading RV monitors, and
> + * to control the verification session.
> + *
> + * == Registering monitors ==
> + *
> + * The struct rv_monitor defines a set of callback functions to control
> + * a verification session. For instance, when a given monitor is enabled,
> + * the "start" callback function is called to hook the instrumentation
> + * functions to the kernel trace events. The "stop" function is called
> + * when disabling the verification session.
> + *
> + * A RV monitor is registered via:
> + * int rv_register_monitor(struct rv_monitor *monitor);
> + * And unregistered via:
> + * int rv_unregister_monitor(struct rv_monitor *monitor);
> + *
> + * These functions are exported to modules, enabling verification monitors
> + * to be dynamically loaded.
> + *
> + * == User interface ==
> + *
> + * The user interface resembles kernel tracing interface. It presents
> + * these files:
> + *
> + * "available_monitors"
> + * - List the available monitors, one per line.
> + *
> + * For example:
> + * [root@f32 rv]# cat available_monitors
> + * wip
> + * wwnr
> + *
> + * "enabled_monitors"
> + * - Lists the enabled monitors, one per line;
> + * - Writing to it enables a given monitor;
> + * - Writing a monitor name with a '-' prefix disables it;
> + * - Truncating the file disables all enabled monitors.
> + *
> + * For example:
> + * [root@f32 rv]# cat enabled_monitors
> + * [root@f32 rv]# echo wip > enabled_monitors
> + * [root@f32 rv]# echo wwnr >> enabled_monitors
> + * [root@f32 rv]# cat enabled_monitors
> + * wip
> + * wwnr
> + * [root@f32 rv]# echo !wip >> enabled_monitors
> + * [root@f32 rv]# cat enabled_monitors
> + * wwnr
> + * [root@f32 rv]# echo > enabled_monitors
> + * [root@f32 rv]# cat enabled_monitors
> + * [root@f32 rv]#
> + *
> + * Note that more than one monitor can be enabled concurrently.
> + *
> + * "monitoring_on"
> + * - It is an on/off general switcher for monitoring. Note
> + * that it does not disable enabled monitors, but stop the per-entity
> + * monitors of monitoring the events received from the system.
> + * It resambles the "tracing_on" switcher.
> + *
> + * "monitors/"
> + * Each monitor will have its one directory inside "monitors/". There
> + * the monitor specific files will be presented.
> + * The "monitors/" directory resambles the "events" directory on
> + * tracefs.
> + *
> + * For example:
> + * [root@f32 rv]# cd monitors/wip/
> + * [root@f32 wip]# ls
> + * desc enable
> + * [root@f32 wip]# cat desc
> + * auto-generated wakeup in preemptive monitor.
> + * [root@f32 wip]# cat enable
> + * 0
> + *
> + * Copyright (C) 2019-2022 Daniel Bristot de Oliveira <bristot@kernel.org>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <rv/rv.h>
> +
> +#include "rv.h"
> +
> +DEFINE_MUTEX(rv_interface_lock);
> +struct rv_interface rv_root;
> +
> +struct dentry *get_monitors_root(void)
> +{
> + return rv_root.monitors_dir;
> +}
> +
> +/*
> + * Monitoring on global switcher!
> + */
> +bool __read_mostly monitoring_on;
> +
> +/*
> + * Interface for the monitor register.
> + */
> +LIST_HEAD(rv_monitors_list);
> +
> +static int task_monitor_count;
> +static bool task_monitor_slots[RV_PER_TASK_MONITORS];
> +
> +int get_task_monitor_slot(void)
> +{
> + int i;
> +
> + lockdep_assert_held(&rv_interface_lock);
> +
> + if (task_monitor_count == RV_PER_TASK_MONITORS)
> + return -EBUSY;
> +
> + task_monitor_count++;
> +
> + for (i = 0; i < RV_PER_TASK_MONITORS; i++) {
> + if (task_monitor_slots[i] == false) {
> + task_monitor_slots[i] = true;
> + return i;
> + }
> + }
> +
> + WARN_ONCE(1, "RV task_monitor_cout and slots are out of sync\n");

task_monitor_count
> +
> + return -EINVAL;
> +}
> +
> +void put_task_monitor_slot(int slot)
> +{
> + lockdep_assert_held(&rv_interface_lock);
> +
> + if (slot < 0 || slot > RV_PER_TASK_MONITORS) {
> + WARN_ONCE(1, "RV releasing an invlid slot!: %d\n", slot);

invalid

> + return;
> + }
> +
> + WARN_ONCE(!task_monitor_slots[slot], "RV releasing unsused task_monitor_slots: %d\n",

unused

> + slot);
> +
> + task_monitor_count--;
> + task_monitor_slots[slot] = false;
> +}
> +
> +/*
> + * This section collects the monitor/ files and folders.
> + */
> +static ssize_t monitor_enable_read_data(struct file *filp,
> + char __user *user_buf,
> + size_t count, loff_t *ppos)
> +{
> + struct rv_monitor_def *mdef = filp->private_data;
> + char buff[4];
> +
> + memset(buff, 0, sizeof(buff));

Not sure if the generated code is different, but the memset can be
rolled into buff declaration as -

char buff[4] = { 0 };

> +
> + mutex_lock(&rv_interface_lock);
> + sprintf(buff, "%x\n", mdef->monitor->enabled);
> + mutex_unlock(&rv_interface_lock);
> +
> + return simple_read_from_buffer(user_buf, count, ppos,
> + buff, strlen(buff)+1);
> +}
> +
> +/*
> + * Disable a given runtime monitor.
> + */
> +static int disable_monitor(struct rv_monitor_def *mdef)
> +{
> + if (mdef->monitor->enabled) {
> + mdef->monitor->enabled = 0;
> + mdef->monitor->stop();
> + }
> +
> + mdef->enabled = 0;
> + return 0;
> +}
> +
> +/*
> + * Enable a given monitor.
> + */
> +static int enable_monitor(struct rv_monitor_def *mdef)
> +{
> + int retval;
> +
> + /*
> + * Reset all internal monitors before starting.
> + */
> + mdef->monitor->reset();
> + if (!mdef->monitor->enabled) {
> + retval = mdef->monitor->start();
> + if (retval)
> + return retval;
> + }
> +
> + mdef->monitor->enabled = 1;
> + mdef->enabled = 1;
> +
> + return 0;
> +}
> +
> +/*
> + * interface for enabling/disabling a monitor.
> + */
> +static ssize_t monitor_enable_write_data(struct file *filp,
> + const char __user *user_buf,
> + size_t count, loff_t *ppos)
> +{
> + struct rv_monitor_def *mdef = filp->private_data;
> + int retval;
> + u64 val;
> +
> + retval = kstrtoull_from_user(user_buf, count, 10, &val);

IIUC, kstrtobool_from_user() is better suited here.

Thanks,
Punit

> + if (retval)
> + return retval;
> +
> + retval = count;
> +
> + mutex_lock(&rv_interface_lock);
> +
> + switch (val) {
> + case 0:
> + retval = disable_monitor(mdef);
> + break;
> + case 1:
> + retval = enable_monitor(mdef);
> + break;
> + default:
> + retval = -EINVAL;
> + }
> +
> + mutex_unlock(&rv_interface_lock);
> +
> + return retval;
> +}
> +

[...]

\
 
 \ /
  Last update: 2022-06-23 20:16    [W:0.383 / U:1.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site