lkml.org 
[lkml]   [2022]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
Date
The Data Ready Output Pin is either hard wired to work as high
impedance or push-pull. Make it configurable.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---
.../devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 95ab285f4eba..74b333e44bfd 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -36,6 +36,14 @@ properties:
description: IRQ line of the ADC
maxItems: 1

+ microchip,data-ready-hiz:
+ description:
+ Data Ready Pin Inactive State Control bit
+ true = The DR pin state is high-impedance when data are NOT ready
+ false = The DR pin state is a logic high when data are NOT ready
+ type: boolean
+ default: false
+
microchip,device-addr:
description: Device address when multiple MCP3911 chips are present on the same SPI bus.
$ref: /schemas/types.yaml#/definitions/uint32
--
2.36.1
\
 
 \ /
  Last update: 2022-06-23 19:41    [W:0.286 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site