lkml.org 
[lkml]   [2022]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] USB: serial: option: add Quectel RM500K module support
On Thu, Jun 23, 2022 at 11:52:14AM +0800, Macpaul Lin wrote:
> Add usb product id of the Quectel RM500K module.
>
> RM500K provides 2 maindatory interfaces to Linux host after enumeration.

typo: mandatory

> - /dev/ttyUSB5: this is a serial interface for control path. User needs
> to write AT commands to this device node to query status, set APN,
> set PIN code, and enable/disable the data connection to 5G network.
> - ethX: this is the data path provided as a RNDIS devices. After the
> data connection has been established, Linux host can access 5G data
> network via this interface.
>
> The following kernel settings is required for RM500K.
> - CONFIG_USB_SERIAL_GENERIC
> - CONFIG_USB_SERIAL_CONSOLE

You shouldn't need either of those.

> - CONFIG_USB_NET_RNDIS_HOST
> - CONFIG_USB_SERIAL_WWAN
> - CONFIG_USB_SERIAL_OPTION

And OPTION selects WWAN so no need to mention that.

But you can probably just drop this paragraph.

> usb-devices output for 0x7001:
> T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=2c7c ProdID=7001 Rev=00.01
> S: Manufacturer=MediaTek Inc.
> S: Product=USB DATA CARD
> S: SerialNumber=869206050009672
> C: #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host
> E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Can you say something about what the other interfaces are for?

> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
> Signed-off-by: Ballon Shi <ballon.shi@quectel.com>

The submitters SoB always goes last (to reflect how the patch was
forwarded).

If Ballon is the primary author you need to add a From line at the
beginning of mail body.

Otherwise you should add a Co-developed-by tag before the co-author's
SoB.

More details in

Documentation/process/submitting-patches.rst

> Cc: stable@vger.kernel.org
> ---
> drivers/usb/serial/option.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index e7755d9cfc61..e2587a3c7600 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -253,6 +253,7 @@ static void option_instat_callback(struct urb *urb);
> #define QUECTEL_PRODUCT_BG96 0x0296
> #define QUECTEL_PRODUCT_EP06 0x0306
> #define QUECTEL_PRODUCT_EM12 0x0512
> +#define QUECTEL_PRODUCT_RM500K 0x7001

Please keep the defines sorted by PID here.

> #define QUECTEL_PRODUCT_RM500Q 0x0800
> #define QUECTEL_PRODUCT_EC200S_CN 0x6002
> #define QUECTEL_PRODUCT_EC200T 0x6026
> @@ -1135,6 +1136,7 @@ static const struct usb_device_id option_ids[] = {
> { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0, 0) },
> { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0700, 0xff), /* BG95 */
> .driver_info = RSVD(3) | ZLP },
> + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
> { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
> { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
> { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),

Johan

\
 
 \ /
  Last update: 2022-06-23 08:37    [W:1.941 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site