Messages in this thread | | | Date | Wed, 22 Jun 2022 17:40:43 +0200 | Subject | Re: [PATCH v11 0/3] Add basic node support for MediaTek MT8186 SoC | From | Matthias Brugger <> |
| |
On 20/05/2022 14:22, Allen-KH Cheng wrote: > MT8186 is a SoC based on 64bit ARMv8 architecture. > It contains 6 CA55 and 2 CA76 cores. > MT8186 share many HW IP with MT65xx series. > > This patchset was tested on MT8186 evaluation board to shell. >
Applied, thanks!
> Based on next-20220519, linux-next/master > > changes since v9: > - remove some merged PATCHs from series > - reorder nodes in dts (cpu-map) > - remove okay status in auxadc > - remove unnecessary suffix node name for i2c > - add pwm node > - add dsi-phy node > - add dpi node > > changes since v9: > - add one space before equal sign of drive-strength-adv > - corect compatible name for big cores (ca76) > - use upper case of address in pinctrl > - add pwrap node > - add pwm node > > changes since v8: > - change name from pins_bus to pins-sda-scl > - correct email address > - add capacity-dmips-mhz for each CPU > - add ppi-partitions in gic node > - change name to power-domain > - remove status "okay" in scp node > - update timer and pericfg compatible in series > > changes since v7: > - add scp&auxadc node > > changes since v6: > - remove unnecessary blank line > > changes since v5: > - replace Mediatek a to MediaTek > - use GPL-2.0-only OR BSD-2-Clause > > changes since v4: > - correct driver clock of mt8186 > - add power domains controller and clock controllers > - add pinctrl, usb host, spi and i2c nodes > - add node status in mt8186-evb.dts > - correct some dtbs_check warnings > > changes since v3: > - remove serial, mmc and phy patch from series. (already merged) > - remove mcusysoff node > - move oscillator nodes at the head of dts > - change name from usb-phy to t-phy > > changes since v2: > - add soc {} in mt8186.dtsi > > changes since v1: > - add dt-bindings: arm: Add compatible for MediaTek MT8186 > > Allen-KH Cheng (3): > dt-bindings: arm: mediatek: Add mt8186 pericfg compatible > dt-bindings: arm: Add compatible for MediaTek MT8186 > arm64: dts: Add MediaTek SoC MT8186 dts and evaluation board and > Makefile > > .../devicetree/bindings/arm/mediatek.yaml | 4 + > .../arm/mediatek/mediatek,pericfg.yaml | 1 + > arch/arm64/boot/dts/mediatek/Makefile | 1 + > arch/arm64/boot/dts/mediatek/mt8186-evb.dts | 232 ++++ > arch/arm64/boot/dts/mediatek/mt8186.dtsi | 1016 +++++++++++++++++ > 5 files changed, 1254 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-evb.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186.dtsi >
| |