lkml.org 
[lkml]   [2022]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [RFC 00/13] perf: Add perf kwork
    On Mon, Jun 13, 2022 at 05:45:52PM +0800, Yang Jihong wrote:
    > Sometimes, we need to analyze time properties of kernel work such as irq,
    > softirq, and workqueue, such as delay and running time of specific interrupts.
    > Currently, these events have kernel tracepoints, but perf tool does not
    > directly analyze the delay of these events
    >
    > The perf-kwork tool is used to trace time properties of kernel work
    > (such as irq, softirq, and workqueue), including runtime, latency,
    > and timehist, using the infrastructure in the perf tools to allow
    > tracing extra targets
    >
    > test case:
    >
    > # perf kwork report
    >
    > Kwork Name | Cpu | Total Runtime | Frequency | Max runtime | Max runtime start | Max runtime end |
    > ---------------------------------------------------------------------------------------------------------------------------
    > (s)RCU:9 | 0007 | 3.488 ms | 1258 | 0.145 ms | 3398384.220013 s | 3398384.220157 s |
    > (s)NET_RX:3 | 0003 | 1.866 ms | 156 | 0.042 ms | 3398385.629764 s | 3398385.629806 s |
    > (s)TIMER:1 | 0000 | 1.799 ms | 117 | 0.055 ms | 3398385.568033 s | 3398385.568088 s |
    > (w)0xffff9c66e563ee98 | 0006 | 1.561 ms | 5 | 0.351 ms | 3398384.060021 s | 3398384.060371 s |

    What units are used for "Frequency"? It would be helpful to include somewhere.

    PC

    \
     
     \ /
      Last update: 2022-06-22 17:02    [W:3.324 / U:0.932 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site