lkml.org 
[lkml]   [2022]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 7/9] driver core: Set fw_devlink.strict=1 by default
On Wed, Jun 22, 2022 at 1:35 PM Saravana Kannan <saravanak@google.com> wrote:
>
> On Wed, Jun 22, 2022 at 12:40 PM Saravana Kannan <saravanak@google.com> wrote:
> >
> > On Wed, Jun 22, 2022 at 1:44 AM Linus Walleij <linus.walleij@linaro.org> wrote:
> > >
> > > On Wed, Jun 22, 2022 at 9:48 AM Sascha Hauer <sha@pengutronix.de> wrote:
> > >
> > > > This patch has the effect that console UART devices which have "dmas"
> > > > properties specified in the device tree get deferred for 10 to 20
> > > > seconds. This happens on i.MX and likely on other SoCs as well. On i.MX
> > > > the dma channel is only requested at UART startup time and not at probe
> > > > time. dma is not used for the console. Nevertheless with this driver probe
> > > > defers until the dma engine driver is available.
> >
> > FYI, if most of the drivers are built in, you could set
> > deferred_probe_timeout=1 to reduce the impact of this (should drop
> > down to 1 to 2 seconds). Is that an option until we figure out
> > something better?
> >
> > Actually, why isn't earlyconsole being used? That doesn't get blocked
> > on anything and the main point of that is to have console working from
> > really early on.
> >
> > > >
> > > > It shouldn't go in as-is.
> > >
> > > This affects all machines with the PL011 UART and DMAs specified as
> > > well.
> > >
> > > It would be best if the console subsystem could be treated special and
> > > not require DMA devlink to be satisfied before probing.
> >
> > If we can mark the console devices somehow before their drivers probe
> > them, I can make fw_devlink give them special treatment. Is there any
> > way I could identify them before their drivers probe?
> >
> > > It seems devlink is not quite aware of the concept of resources that are
> > > necessary to probe vs resources that are nice to have and might be
> > > added after probe.
> >
> > Correct, it can't tell them apart. Which is why it tries its best to
> > enforce them, get most of them ordered properly and then gives up
> > enforcing the rest after deferred_probe_timeout= expires. There's a
> > bit more nuance than what I explained here (explained in earlier
> > commit texts, LPC talks), but that's the gist of it. That's what's
> > going on in this case Sascha is pointing out.z
> >
> > > We need a strong devlink for the first category
> > > and maybe a weak devlink for the latter category.
> > >
> > > I don't know if this is a generic hardware property for all operating
> > > systems so it could be a DT property such as dma-weak-dependency?
> > >
> > > Or maybe compromize and add a linux,dma-weak-dependency;
> > > property?
> >
> > The linux,dma-weak-dependency might be an option, but then if the
> > kernel version changes and we want to enforce it because we now have a
> > dma driver (not related to Shasha's example) support, then the
> > fw_devlink still can't enforce it because of that property. But maybe
> > that's okay? The consumer can try to use dma and defer probe if it
> > fails?
> >
> > Another option is to mark console devices in DT with some property and
> > we can give special treatment for those without waiting for
> > deferred_probe_timeout= to expire.
>
> Heh, looks like there's already a property for that: stdout-path.
>
> Let me send a series that'll use that to give special treatment to
> console devices.

Here's the fix.
https://lore.kernel.org/lkml/20220622215912.550419-1-saravanak@google.com/

Sascha, can you give it a shot?

-Saravana

\
 
 \ /
  Last update: 2022-06-23 00:32    [W:0.112 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site