lkml.org 
[lkml]   [2022]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [v3 5/5] drm/msm/disp/dpu1: add PSR support for eDP interface in dpu driver
From
On 21/06/2022 13:53, Vinod Polimera wrote:
> Enable PSR on eDP interface using drm self-refresh librabry.
> This patch uses a trigger from self-refresh library to enter/exit
> into PSR, when there are no updates from framework.
>
> Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
> Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 36 ++++++++++++++++++++++++-----
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 20 +++++++++++++++-
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 +-
> 3 files changed, 50 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index b56f777..c6e4f03 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -18,6 +18,7 @@
> #include <drm/drm_probe_helper.h>
> #include <drm/drm_rect.h>
> #include <drm/drm_vblank.h>
> +#include <drm/drm_self_refresh_helper.h>
>
> #include "dpu_kms.h"
> #include "dpu_hw_lm.h"
> @@ -955,24 +956,39 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
> crtc);
> struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> struct dpu_crtc_state *cstate = to_dpu_crtc_state(crtc->state);
> - struct drm_encoder *encoder;
> + struct drm_encoder *encoder = NULL;
> unsigned long flags;
> bool release_bandwidth = false;
>
> DRM_DEBUG_KMS("crtc%d\n", crtc->base.id);
>
> + if (old_crtc_state->self_refresh_active) {
> + drm_for_each_encoder_mask(encoder, crtc->dev,
> + old_crtc_state->encoder_mask) {
> + dpu_encoder_assign_crtc(encoder, NULL);

I think we should drop dpu_encoder_assign_crtc completely and use your
new helpers instead. Having to manually duplicate existing link sounds
like a bad idea.

> + }
> + return;
> + }
> +
> /* Disable/save vblank irq handling */
> drm_crtc_vblank_off(crtc);
>
> drm_for_each_encoder_mask(encoder, crtc->dev,
> old_crtc_state->encoder_mask) {
> - /* in video mode, we hold an extra bandwidth reference
> + /*
> + * in video mode, we hold an extra bandwidth reference

Unrelated to this patch.

> * as we cannot drop bandwidth at frame-done if any
> * crtc is being used in video mode.
> */
> if (dpu_encoder_get_intf_mode(encoder) == INTF_MODE_VIDEO)
> release_bandwidth = true;
> - dpu_encoder_assign_crtc(encoder, NULL);
> + /*
> + * If disable is triggered during psr active(e.g: screen dim in PSR),
> + * we will need encoder->crtc connection to process the device sleep &
> + * preserve it during psr sequence.
> + */
> + if (!crtc->state->self_refresh_active)
> + dpu_encoder_assign_crtc(encoder, NULL);
> }
>
> /* wait for frame_event_done completion */
> @@ -1020,7 +1036,9 @@ static void dpu_crtc_enable(struct drm_crtc *crtc,
> struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> struct drm_encoder *encoder;
> bool request_bandwidth = false;
> + struct drm_crtc_state *old_crtc_state;
>
> + old_crtc_state = drm_atomic_get_old_crtc_state(state, crtc);
> pm_runtime_get_sync(crtc->dev->dev);
>
> DRM_DEBUG_KMS("crtc%d\n", crtc->base.id);
> @@ -1042,8 +1060,9 @@ static void dpu_crtc_enable(struct drm_crtc *crtc,
> trace_dpu_crtc_enable(DRMID(crtc), true, dpu_crtc);
> dpu_crtc->enabled = true;
>
> - drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state->encoder_mask)
> - dpu_encoder_assign_crtc(encoder, crtc);
> + if (!old_crtc_state->self_refresh_active)
> + drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state->encoder_mask)
> + dpu_encoder_assign_crtc(encoder, crtc);
>
> /* Enable/restore vblank irq handling */
> drm_crtc_vblank_on(crtc);
> @@ -1525,7 +1544,7 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
> {
> struct drm_crtc *crtc = NULL;
> struct dpu_crtc *dpu_crtc = NULL;
> - int i;
> + int i, ret;
>
> dpu_crtc = kzalloc(sizeof(*dpu_crtc), GFP_KERNEL);
> if (!dpu_crtc)
> @@ -1562,6 +1581,11 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
> /* initialize event handling */
> spin_lock_init(&dpu_crtc->event_lock);
>
> + ret = drm_self_refresh_helper_init(crtc);
> + if (ret)
> + DPU_ERROR("Failed to initialize %s with self-refresh helpers %d\n",
> + crtc->name, ret);
> +
> DRM_DEBUG_KMS("%s: successfully initialized crtc\n", dpu_crtc->name);
> return crtc;
> }
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index cc2809b..234e95d 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -225,6 +225,11 @@ bool dpu_encoder_is_widebus_enabled(const struct drm_encoder *drm_enc)
> return dpu_enc->wide_bus_en;
> }
>
> +static inline bool is_self_refresh_active(const struct drm_crtc_state *state)
> +{
> + return (state && state->self_refresh_active);
> +}
> +
> static void _dpu_encoder_setup_dither(struct dpu_hw_pingpong *hw_pp, unsigned bpc)
> {
> struct dpu_hw_dither_cfg dither_cfg = { 0 };
> @@ -592,7 +597,8 @@ static int dpu_encoder_virt_atomic_check(
> if (drm_atomic_crtc_needs_modeset(crtc_state)) {
> dpu_rm_release(global_state, drm_enc);
>
> - if (!crtc_state->active_changed || crtc_state->active)
> + if (!crtc_state->active_changed || crtc_state->active ||
> + crtc_state->self_refresh_active)

This condition should be changed to use enabled rather than active.
Quoting KMS documentation: 'The driver must not release any shared
resources if active is set to false but enable still true...'

> ret = dpu_rm_reserve(&dpu_kms->rm, global_state,
> drm_enc, crtc_state, topology);
> }
> @@ -1171,11 +1177,23 @@ static void dpu_encoder_virt_atomic_disable(struct drm_encoder *drm_enc,
> struct drm_atomic_state *state)
> {
> struct dpu_encoder_virt *dpu_enc = NULL;
> + struct drm_crtc *crtc;
> + struct drm_crtc_state *old_state;
> int i = 0;
>
> dpu_enc = to_dpu_encoder_virt(drm_enc);
> DPU_DEBUG_ENC(dpu_enc, "\n");
>
> + crtc = dpu_enc->crtc;
> + old_state = drm_atomic_get_old_crtc_state(state, crtc);
> +
> + /*
> + * The encoder disabled already occurred when self refresh mode
> + * was set earlier, in the old_state for the corresponding crtc.
> + */
> + if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && is_self_refresh_active(old_state))
> + return;
> +

Why do you need to check the encoder_type?

> mutex_lock(&dpu_enc->enc_lock);
> dpu_enc->enabled = false;
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index bce4764..cc0a674 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -507,7 +507,7 @@ static void dpu_kms_wait_for_commit_done(struct msm_kms *kms,
> return;
> }
>
> - if (!crtc->state->active) {
> + if (!drm_atomic_crtc_effectively_active(crtc->state)) {
> DPU_DEBUG("[crtc:%d] not active\n", crtc->base.id);
> return;
> }


--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2022-06-21 21:10    [W:1.058 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site