lkml.org 
[lkml]   [2022]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 16/19] arm64: dts: mediatek: Add infra #reset-cells property for MT8195
From
Date
On Mon, 2022-05-23 at 14:00 +0800, Rex-BC Chen wrote:
> We will use mediatek clock reset as infracfg_ao reset instead of
> ti-syscon. To support this, remove property of ti reset and add
> property of #reset-cells for mediatek clock reset.
>
> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@collabora.com>
> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8195.dtsi | 15 ++-------------
> 1 file changed, 2 insertions(+), 13 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index b57e620c2c72..db16eba9d475 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -10,7 +10,6 @@
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/phy/phy.h>
> #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
> -#include <dt-bindings/reset/ti-syscon.h>
>
> / {
> compatible = "mediatek,mt8195";
> @@ -292,20 +291,10 @@
> };
>
> infracfg_ao: syscon@10001000 {
> - compatible = "mediatek,mt8195-infracfg_ao",
> "syscon", "simple-mfd";
> + compatible = "mediatek,mt8195-infracfg_ao",
> "syscon";
> reg = <0 0x10001000 0 0x1000>;
> #clock-cells = <1>;
> -
> - infracfg_rst: reset-controller {
> - compatible = "ti,syscon-reset";
> - #reset-cells = <1>;
> - ti,reset-bits = <
> - 0x140 18 0x144 18 0 0
> (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* pcie */
> - 0x120 0 0x124 0 0 0
> (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */
> - 0x730 10 0x734 10 0 0
> (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */
> - 0x150 5 0x154 5 0 0
> (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* svs gpu */
> - >;
> - };
> + #reset-cells = <1>;
> };
>
> pericfg: syscon@10003000 {
> --
> 2.18.0
>

Hello Matthias,

driver part is accepted by Setphen[1].
dts part is also reviewed.
Is these dts parts ok for you? (including patch 15 and 16)
Or should I send another series for dts part?

Thanks!

[1]:
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/log/?h=clk-next

BRs,
Bo-Chen

\
 
 \ /
  Last update: 2022-06-20 08:41    [W:0.147 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site