lkml.org 
[lkml]   [2022]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 06/15] dt-bindings: mfd: amd,pensando-elbasr: Add AMD Pensando Elba System Resource chip
From
On 13/06/2022 21:56, Brad Larson wrote:
> From: Brad Larson <blarson@amd.com>
>
> Add support for the AMD Pensando Elba SoC System Resource chip
> using the SPI interface. The Elba SR is a Multi-function Device
> supporting device register access using CS0, smbus interface for
> FRU and board peripherals using CS1, dual Lattice I2C masters for
> transceiver management using CS2, and CS3 for flash access.
>
> Signed-off-by: Brad Larson <blarson@amd.com>
> ---
> .../bindings/mfd/amd,pensando-elbasr.yaml | 93 +++++++++++++++++++
> 1 file changed, 93 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml b/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
> new file mode 100644
> index 000000000000..13356800b1cf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/amd,pensando-elbasr.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/amd,pensando-elbasr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AMD Pensando Elba SoC Resource Controller bindings
> +
> +description: |
> + AMD Pensando Elba SoC Resource Controller bindings attached to a SPI bus.
> +
> +maintainers:
> + - Brad Larson <blarson@amd.com>
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - amd,pensando-elbasr
> + - const: simple-mfd
> +
> + spi-max-frequency:
> + description: Maximum SPI frequency of the device in Hz.
> +
> + reg:
> + maxItems: 1
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + interrupts:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - spi-max-frequency
> +
> +patternProperties:
> + '^reset-controller@[a-f0-9]+$':
> + $ref: ../reset/amd,pensando-elbasr-reset.yaml
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/reset/amd,pensando-elba-reset.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + spi0 {

Just "spi"

> + #address-cells = <1>;
> + #size-cells = <0>;
> + num-cs = <4>;
> +
> + spi@0 {

"spi" is for SPI controllers. Use generic name matching the device.
Usually this is "system-controller", however Rob pointed out your
inaccurate bindings and example.

> + compatible = "amd,pensando-elbasr", "simple-mfd";
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + spi-max-frequency = <12000000>;
> +
> + rstc: reset-controller@0 {
> + compatible = "amd,pensando-elbasr-reset";
> + reg = <0>;
> + #reset-cells = <1>;
> + };
> + };
> +
> + spi@1 {
> + compatible = "amd,pensando-elbasr", "simple-mfd";
> + reg = <1>;
> + spi-max-frequency = <12000000>;
> + };
> +
> + spi@2 {
> + compatible = "amd,pensando-elbasr", "simple-mfd";
> + reg = <2>;
> + spi-max-frequency = <12000000>;
> + interrupt-parent = <&porta>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + spi@3 {
> + compatible = "amd,pensando-elbasr", "simple-mfd";
> + reg = <3>;
> + spi-max-frequency = <12000000>;
> + };
> + };
> +
> +...


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-06-20 15:01    [W:0.323 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site