lkml.org 
[lkml]   [2022]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.18 003/141] arm64: dts: imx8mn-beacon: Enable RTS-CTS on UART3
    Date
    From: Adam Ford <aford173@gmail.com>

    commit 5446ff1a67160ad92d9aae9530846aa54750be36 upstream.

    There is a header for a DB9 serial port, but any attempts to use
    hardware handshaking fail. Enable RTS and CTS pin muxing and enable
    handshaking in the uart node.

    Signed-off-by: Adam Ford <aford173@gmail.com>
    Signed-off-by: Shawn Guo <shawnguo@kernel.org>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    ---
    arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi | 3 +++
    1 file changed, 3 insertions(+)

    --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
    +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
    @@ -175,6 +175,7 @@
    pinctrl-0 = <&pinctrl_uart3>;
    assigned-clocks = <&clk IMX8MN_CLK_UART3>;
    assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
    + uart-has-rtscts;
    status = "okay";
    };

    @@ -258,6 +259,8 @@
    fsl,pins = <
    MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40
    MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40
    + MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x40
    + MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x40
    >;
    };


    \
     
     \ /
      Last update: 2022-06-20 14:55    [W:4.395 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site