lkml.org 
[lkml]   [2022]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Boot stall regression from "printk for 5.19" merge
On Mon, 20 Jun 2022 00:29:16 +0206
John Ogness <john.ogness@linutronix.de> wrote:

> Hi Marek,
>
> On 2022-06-19, Marek Behún <kabel@kernel.org> wrote:
> > the series
> > https://lore.kernel.org/linux-kernel/YouKQw72H7y9EJQK@alley/
> > merged by commit 537e62c865dc ("Merge tag 'printk-for-5.19' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux")
> >
> > and in particular the commit 09c5ba0aa2fc ("printk: add kthread console
> > printers")
> >
> > causes a regression on arm64 (Marvell CN9130-CRB board) where the
> > system boot freezes in most cases (and is unusable until restarted by
> > watchdog), or, in some cases boots, but the console output gets mangled
> > for a while (the serial console spits garbage characters).
>
> Could you provide your kernel config and a complete kernel boot log (at
> least as much as you get)? I would like to investigate the serial
> driver. What you are describing sounds more like a serial bug. The
> kthread console series has already uncovered serial driver bugs in
> multiple drivers.
>
> Thanks for reporting this.
>
> John Ogness

Hi John,

attaching bootlogs and config.

Marek
[unhandled content-type:application/octet-stream][ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.19.0-rc2-00410-g9776fe0f424b (kabel@dellmb) (aarch64-unknown-linux-gnu-gcc (Gentoo Hardened 10.3.1_p20211126 p0) 10.3.1 20211126, GNU ld (Gentoo 2.37_p1 p2) 2.37) #491 SMP Mon Jun 20 11:00:54 CEST 2022
[ 0.000000] Machine model: Marvell Armada CN9130-CRB-B
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000f0512000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x23efd1140-0x23efd2fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] node 0: [mem 0x0000000004000000-0x00000000041fffff]
[ 0.000000] node 0: [mem 0x0000000004200000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] cma: Reserved 96 MiB at 0x00000000ba000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS resident on physical CPU 0x0
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 19 pages/cpu s37544 r8192 d32088 u77824
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2064384
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio32,0xf0512000 root=/dev/mmcblk1p1 rw rootwait pci=pcie_bus_safe cpuidle.off=1 cma=96M oops=panic panic=15
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000b6000000-0x00000000ba000000] (64MB)
[ 0.000000] Memory: 8038008K/8388608K available (14528K kernel code, 1232K rwdata, 4472K rodata, 2752K init, 488K bss, 252296K reserved, 98304K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f022f000
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32)
[ 0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32)
[ 0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32)
[ 0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32)
[ 0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.008184] Console: colour dummy device 80x25
[ 0.012710] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[ 0.023209] pid_max: default: 32768 minimum: 301
[ 0.027926] LSM: Security Framework initializing
[ 0.032655] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.040328] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.048990] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.056306] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.062565] rcu: Hierarchical SRCU implementation.
[ 0.062589] printk: bootconsole [uart8250] printing thread started
[ 0.073843] smp: Bringing up secondary CPUs ...
[ 0.074238] Detected PIPT I-cache on CPU1
[ 0.074267] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.074695] Detected PIPT I-cache on CPU2
[ 0.074716] CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
[ 0.101014] Detected PIPT I-cache on CPU3
[ 0.101030] CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
[ 0.101061] smp: Brought up 1 node, 4 CPUs
[ 0.101064] SMP: Total of 4 processors activated.
[ 0.101067] CPU features: detected: 32-bit EL0 Support
[ 0.101068] CPU features: detected: CRC32 instructions
[ 0.101100] CPU: All CPU(s) started at EL2
[ 0.101111] alternatives: patching kernel code
[ 0.102096] devtmpfs: initialized
[ 0.103487] KASLR enabled
[ 0.103528] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.103535] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.104202] pinctrl core: initialized pinctrl subsystem
[ 0.104605] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.175823] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.176014] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.176214] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.176235] audit: initializing netlink subsys (disabled)
[ 0.176281] audit: type=2000 audit(0.148:1): state=initialized audit_enabled=0 res=1
[ 0.176449] thermal_sys: Registered thermal governor 'step_wise'
[ 0.176703] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.176742] ASID allocator initialised with 32768 entries
[ 0.176745] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
[ 0.176747] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB
[ 0.176748] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
[ 0.176750] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB
[ 0.176791] Serial: AMBA PL011 UART driver
[ 0.264644] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.264648] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.264649] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.264651] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.264864] cryptd: max_cpu_qlen set to 1000
[ 0.330807] raid6: neonx8 gen() 6249 MB/s
[ 0.398838] raid6: neonx4 gen() 6413 MB/s
[ 0.466869] raid6: neonx2 gen() 5630 MB/s
[ 0.534902] raid6: neonx1 gen() 4359 MB/s
[ 0.602932] raid6: int64x8 gen() 3457 MB/s
[ 0.670968] raid6: int64x4 gen() 3741 MB/s
[ 0.738998] raid6: int64x2 gen() 3515 MB/s
[ 0.807035] raid6: int64x1 gen() 2669 MB/s
[ 0.807036] raid6: using algorithm neonx4 gen() 6413 MB/s
[ 0.875061] raid6: .... xor() 4669 MB/s, rmw enabled
[ 0.875063] raid6: using neon recovery algorithm
[ 0.875340] iommu: Default domain type: Translated
[ 0.875342] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.875434] SCSI subsystem initialized
[ 0.875547] usbcore: registered new interface driver usbfs
[ 0.875557] usbcore: registered new interface driver hub
[ 0.875569] usbcore: registered new device driver usb
[ 0.875629] usb_phy_generic cp0_usb3_phy0: supply vcc not found, using dummy regulator
[ 0.875665] usb_phy_generic cp0_usb3_phy0: dummy supplies not allowed for exclusive requests
[ 0.875787] pps_core: LinuxPPS API ver. 1 registered
[ 0.875789] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.875793] PTP clock support registered
[ 0.876192] vgaarb: loaded
[ 0.876296] clocksource: Switched to clocksource arch_sys_counter
[ 0.878566] NET: Registered PF_INET protocol family
[ 0.878688] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.881003] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.881033] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.881040] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.881227] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.881596] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.881640] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.881714] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.881862] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.882100] NET: Registered PF_XDP protocol family
[ 0.882105] PCI: CLS 0 bytes, default 64
[ 1.044000] Initialise system trusted keyrings
[ 1.044085] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[ 1.046204] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.046277] fuse: init (API version 7.36)
[ 1.064480] NET: Registered PF_ALG protocol family
[ 1.064488] xor: measuring software checksum speed
[ 1.065414] 8regs : 10663 MB/sec
[ 1.066274] 32regs : 11465 MB/sec
[ 1.067327] arm64_neon : 9364 MB/sec
[ 1.067328] xor: using function: 32regs (11465 MB/sec)
[ 1.067332] Key type asymmetric registered
[ 1.067333] Asymmetric key parser 'x509' registered
[ 1.067355] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.067357] io scheduler mq-deadline registered
[ 1.067359] io scheduler kyber registered
[ 1.120214] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver
[ 1.120577] armada-cp110-pinctrl f2440000.system-controller:pinctrl: registered pinctrl driver
[ 1.137980] mv_xor_v2 f0400000.xor: Marvell Version 2 XOR driver
[ 1.166562] printk:[ console [ttyS0] printing thread started
[ 1.166564] printk: console [ttyS0] enabled
1.166486] f0512000.serial: ttyS0 at MMIO 0xf0512000 (irq = 22, base_baud = 12500000) is a 16550A
[ 1.166567] printk: bootconsole [uart8250] disabled
[ 1.185422] printk: bootconsole [uart8250] printing thread stopped
[ 1.188773] brd: module loaded
[ 1.190567] loop: module loaded
[ 1.190827] megasas: 07.719.03.00-rc1
[ 1.191442] ahci f2540000.sata: supply ahci not found, using dummy regulator
[ 1.191504] ahci f2540000.sata: supply phy not found, using dummy regulator
[ 1.191671] platform f2540000.sata:sata-port@0: supply target not found, using dummy regulator
[ 1.192769] spi-nor spi2.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[ 1.193516] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 1.193519] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 1.193520] MACsec IEEE 802.1AE
[ 1.193972] tun: Universal TUN/TAP device driver, 1.6
[ 1.194961] hwmon hwmon0: temp1_input not attached to any thermal zone
[ 1.198341] mv88e2110 f212a600.mdio-mii:00: Firmware version 8.3.0.0
[ 1.198564] hwmon hwmon1: temp1_input not attached to any thermal zone
[ 1.284489] mvpp2 f2000000.ethernet: using 8 per-cpu buffers
[ 1.290098] rvu_af: Marvell OcteonTX2 RVU Admin Function Driver
[ 1.290153] rvu_nicpf: Marvell RVU NIC Physical Function Driver
[ 1.290166] rvu_nicvf: Marvell RVU NIC Virtual Function Driver
[ 1.290350] usbcore: registered new interface driver r8152
[ 1.290363] usbcore: registered new interface driver asix
[ 1.290375] usbcore: registered new interface driver ax88179_178a
[ 1.290386] usbcore: registered new interface driver cdc_ether
[ 1.290397] usbcore: registered new interface driver cdc_eem
[ 1.290410] usbcore: registered new interface driver qmi_wwan
[ 1.290419] usbcore: registered new interface driver r8153_ecm
[ 1.290647] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.290650] ehci-pci: EHCI PCI platform driver
[ 1.290661] ehci-platform: EHCI generic platform driver
[ 1.290710] ehci-orion: EHCI orion driver
[ 1.290753] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.290760] ohci-pci: OHCI PCI platform driver
[ 1.290776] ohci-platform: OHCI generic platform driver
[ 1.290953] usbcore: registered new interface driver cdc_wdm
[ 1.290969] usbcore: registered new interface driver usb-storage
[ 1.291001] usbcore: registered new interface driver usbserial_generic
[ 1.291008] usbserial: USB Serial support registered for generic
[ 1.291018] usbcore: registered new interface driver ftdi_sio
[ 1.291025] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.291034] usbcore: registered new interface driver pl2303
[ 1.291039] usbserial: USB Serial support registered for pl2303
[ 1.291048] usbcore: registered new interface driver qcserial
[ 1.291055] usbserial: USB Serial support registered for Qualcomm USB modem
[ 1.291456] armada38x-rtc f2284000.rtc: registered as rtc0
[ 1.291468] armada38x-rtc f2284000.rtc: setting system clock to 2047-12-04T05:07:16 UTC (2459048836)
[ 1.291545] i2c_dev: i2c /dev entries driver
[ 1.307831] sdhci: Secure Digital Host Controller Interface driver
[ 1.307834] sdhci: Copyright(c) Pierre Ossman
[ 1.307835] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.485145] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.485213] usbcore: registered new interface driver usbhid
[ 1.485215] usbhid: USB HID core driver
[ 1.486546] xt_time: kernel timezone is -0000
[ 1.486596] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 1.486773] gre: GRE over IPv4 demultiplexor driver
[ 1.486775] ip_gre: GRE over IPv4 tunneling driver
[ 1.487150] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 1.487309] NET: Registered PF_INET6 protocol family
[ 1.488611] Segment Routing with IPv6
[ 1.488614] RPL Segment Routing with IPv6
[ 1.488633] In-situ OAM (IOAM) with IPv6
[ 1.488670] mip6: Mobile IPv6
[ 1.488948] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.489255] ip6_gre: GRE over IPv6 tunneling driver
[ 1.490153] bpfilter: Loaded bpfilter_umh pid 591
[ 1.490511] NET: Registered PF_PACKET protocol family
[ 1.490616] 8021q: 802.1Q VLAN Support v1.8
[ 1.490639] Key type dns_resolver registered
[ 1.490797] registered taskstats version 1
[ 1.490806] Loading compiled-in X.509 certificates
[ 1.491127] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 1.508350] usb_phy_generic cp0_usb3_phy1: dummy supplies not allowed for exclusive requests
[ 1.602579] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.603807] armada8k-pcie f2600000.pcie: host bridge /cp0/pcie@f2600000 ranges:
[ 1.603824] armada8k-pcie f2600000.pcie: MEM 0x00c0000000..0x00dfefffff -> 0x00c0000000
[ 1.603852] armada8k-pcie f2600000.pcie: iATU unroll: disabled
[ 1.603854] armada8k-pcie f2600000.pcie: Detected iATU regions: 8 outbound, 8 inbound
[ 2.603928] armada8k-pcie f2600000.pcie: Phy link never came up
[ 2.604005] armada8k-pcie f2600000.pcie: PCI host bridge to bus 0000:00
[ 2.604008] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.604011] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfefffff]
[ 2.604029] pci 0000:00:00.0: [11ab:0110] type 01 class 0x060400
[ 2.604037] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 2.604081] pci 0000:00:00.0: supports D1 D2
[ 2.604083] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 2.605111] pci 0000:00:00.0: BAR 0: assigned [mem 0xc0000000-0xc00fffff]
[ 2.605118] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 2.605126] pci 0000:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 3.270938] pcieport 0000:00:00.0: PME: Signaling with IRQ 36
[ 3.271062] pcieport 0000:00:00.0: AER: enabled with IRQ 36
[ 3.271244] ahci f2540000.sata: supply ahci not found, using dummy regulator
[ 3.271297] ahci f2540000.sata: supply phy not found, using dummy regulator
[ 3.271333] platform f2540000.sata:sata-port@0: supply target not found, using dummy regulator
[ 3.271520] platform f2540000.sata:sata-port@1: supply target not found, using dummy regulator
[ 3.272676] ahci f2540000.sata: masking port_map 0x3 -> 0x3
[ 3.272710] ahci f2540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 3.272715] ahci f2540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 3.338211] scsi host0: ahci
[ 3.338412] scsi host1: ahci
[ 3.338480] ata1: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x100 irq 37
[ 3.338484] ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x180 irq 37
[ 3.338819] sfp sfp: Host maximum power 3.0W
[ 3.340261] mv88e6085 f212a200.mdio-mii:06: switch 0x3930 detected: Marvell 88E6393X, revision 0
[ 3.353264] hwmon hwmon2: temp1_input not attached to any thermal zone
[ 3.363473] hwmon hwmon3: temp1_input not attached to any thermal zone
[ 3.373656] hwmon hwmon4: temp1_input not attached to any thermal zone
[ 3.383851] hwmon hwmon5: temp1_input not attached to any thermal zone
[ 3.394035] hwmon hwmon6: temp1_input not attached to any thermal zone
[ 3.404228] hwmon hwmon7: temp1_input not attached to any thermal zone
[ 3.414414] hwmon hwmon8: temp1_input not attached to any thermal zone
[ 3.424597] hwmon hwmon9: temp1_input not attached to any thermal zone
[ 3.444161] mvpp2 f2000000.ethernet: using 8 per-cpu buffers
[ 3.650410] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.670329] mvpp2 f2000000.ethernet eth0: Using firmware node mac address 00:0f:b7:06:15:6b
[ 3.671958] mvpp2 f2000000.ethernet eth1: Using firmware node mac address 00:0f:b7:06:15:6c
[ 3.694323] xhci-hcd f2500000.usb: xHCI Host Controller
[ 3.694334] xhci-hcd f2500000.usb: new USB bus registered, assigned bus number 1
[ 3.694386] xhci-hcd f2500000.usb: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 3.694410] xhci-hcd f2500000.usb: irq 50, io mem 0xf2500000
[ 3.694469] xhci-hcd f2500000.usb: xHCI Host Controller
[ 3.694474] xhci-hcd f2500000.usb: new USB bus registered, assigned bus number 2
[ 3.694478] xhci-hcd f2500000.usb: Host supports USB 3.0 SuperSpeed
[ 3.694591] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[ 3.694596] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.694598] usb usb1: Product: xHCI Host Controller
[ 3.694600] usb usb1: Manufacturer: Linux 5.19.0-rc2-00410-g9776fe0f424b xhci-hcd
[ 3.694602] usb usb1: SerialNumber: f2500000.usb
[ 3.694802] hub 1-0:1.0: USB hub found
[ 3.694824] hub 1-0:1.0: 1 port detected
[ 3.694981] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.695032] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
[ 3.695035] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.695037] usb usb2: Product: xHCI Host Controller
[ 3.695039] usb usb2: Manufacturer: Linux 5.19.0-rc2-00410-g9776fe0f424b xhci-hcd
[ 3.695041] usb usb2: SerialNumber: f2500000.usb
[ 3.695193] hub 2-0:1.0: USB hub found
[ 3.695209] hub 2-0:1.0: 1 port detected
[ 3.706293] xhci-hcd f2510000.usb: xHCI Host Controller
[ 3.706302] xhci-hcd f2510000.usb: new USB bus registered, assigned bus number 3
[ 3.706359] xhci-hcd f2510000.usb: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 3.706380] xhci-hcd f2510000.usb: irq 51, io mem 0xf2510000
[ 3.706440] xhci-hcd f2510000.usb: xHCI Host Controller
[ 3.706445] xhci-hcd f2510000.usb: new USB bus registered, assigned bus number 4
[ 3.706449] xhci-hcd f2510000.usb: Host supports USB 3.0 SuperSpeed
[ 3.706536] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[ 3.706541] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.706543] usb usb3: Product: xHCI Host Controller
[ 3.706546] usb usb3: Manufacturer: Linux 5.19.0-rc2-00410-g9776fe0f424b xhci-hcd
[ 3.706548] usb usb3: SerialNumber: f2510000.usb
[ 3.706731] hub 3-0:1.0: USB hub found
[ 3.706745] hub 3-0:1.0: 1 port detected
[ 3.706884] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.706943] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
[ 3.706946] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.706948] usb usb4: Product: xHCI Host Controller
[ 3.706950] usb usb4: Manufacturer: Linux 5.19.0-rc2-00410-g9776fe0f424b xhci-hcd
[ 3.706952] usb usb4: SerialNumber: f2510000.usb
[ 3.707087] hub 4-0:1.0: USB hub found
[ 3.707101] hub 4-0:1.0: 1 port detected
[ 3.709114] mv88e6085 f212a200.mdio-mii:06: switch 0x3930 detected: Marvell 88E6393X, revision 0
[ 3.721398] hwmon hwmon2: temp1_input not attached to any thermal zone
[ 3.730172] hwmon hwmon3: temp1_input not attached to any thermal zone
[ 3.738927] hwmon hwmon4: temp1_input not attached to any thermal zone
[ 3.739948] mmc0: SDHCI controller on f06e0000.mmc [f06e0000.mmc] using ADMA 64-bit
[ 3.747766] hwmon hwmon5: temp1_input not attached to any thermal zone
[ 3.756530] hwmon hwmon6: temp1_input not attached to any thermal zone
[ 3.765306] hwmon hwmon7: temp1_input not attached to any thermal zone
[ 3.772304] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.774108] hwmon hwmon8: temp1_input not attached to any thermal zone
[ 3.782887] hwmon hwmon9: temp1_input not attached to any thermal zone
[ 3.817167] mmc0: mmc_select_hs200 failed, error -74
[ 3.819667] xenon-sdhci f06e0000.mmc: Timing issue might occur in DDR mode
[ 3.827241] mmc0: new DDR MMC card at address 0001
[ 3.827509] mmcblk0: mmc0:0001 P1XXXX 3.60 GiB
[ 3.828487] mmcblk0boot0: mmc0:0001 P1XXXX 2.00 MiB
[ 3.829069] mmcblk0boot1: mmc0:0001 P1XXXX 2.00 MiB
[ 3.829571] mmcblk0rpmb: mmc0:0001 P1XXXX 128 KiB, chardev (237:0)
[ 4.663299] mv88e6085 f212a200.mdio-mii:06: configuring for inband/10gbase-r link mode
[ 4.734457] mv88e6085 f212a200.mdio-mii:06 p1 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch0@6!mdio:01] driver [Marvell 88E6393 Family] (irq=65)
[ 4.736172] mvpp2 f2000000.ethernet: all ports have a low MTU, switching to per-cpu buffers
[ 4.756880] mvpp2 f2000000.ethernet: using 8 per-cpu buffers
[ 4.834462] mv88e6085 f212a200.mdio-mii:06 p2 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch0@6!mdio:02] driver [Marvell 88E6393 Family] (irq=66)
[ 4.870440] mv88e6085 f212a200.mdio-mii:06 p3 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch0@6!mdio:03] driver [Marvell 88E6393 Family] (irq=67)
[ 4.938461] mv88e6085 f212a200.mdio-mii:06 p4 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch0@6!mdio:04] driver [Marvell 88E6393 Family] (irq=68)
[ 5.006462] mv88e6085 f212a200.mdio-mii:06 p5 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch0@6!mdio:05] driver [Marvell 88E6393 Family] (irq=69)
[ 5.074463] mv88e6085 f212a200.mdio-mii:06 p6 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch0@6!mdio:06] driver [Marvell 88E6393 Family] (irq=70)
[ 5.142462] mv88e6085 f212a200.mdio-mii:06 p7 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch0@6!mdio:07] driver [Marvell 88E6393 Family] (irq=71)
[ 5.190460] mv88e6085 f212a200.mdio-mii:06 p8 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch0@6!mdio:08] driver [Marvell 88E6393 Family] (irq=72)
[ 5.193336] DSA: tree 0 setup
[ 5.193651] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.193737] xenon-sdhci f2780000.mmc: Got CD GPIO
[ 5.194305] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.224394] mmc1: SDHCI controller on f2780000.mmc [f2780000.mmc] using ADMA 64-bit
[ 5.224491] Waiting for root device /dev/mmcblk1p1...
[ 5.290356] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 5.290599] mmcblk1: mmc1:aaaa SC32G 29.7 GiB
[ 5.292917] mmcblk1: p1
[ 5.312734] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: disabled.
[ 5.312758] VFS: Mounted root (ext4 filesystem) on device 179:97.
[ 5.316429] devtmpfs: mounted
[ 5.316958] Freeing unused kernel memory: 2752K
[ 5.364349] Run /sbin/init as init process
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.19.0-rc2-00410-g9776fe0f424b (kabel@dellmb) (aarch64-unknown-linux-gnu-gcc (Gentoo Hardened 10.3.1_p20211126 p0) 10.3.1 20211126, GNU ld (Gentoo 2.37_p1 p2) 2.37) #491 SMP Mon Jun 20 11:00:54 CEST 2022
[ 0.000000] Machine model: Marvell Armada CN9130-CRB-B
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000f0512000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x23efd2140-0x23efd3fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] node 0: [mem 0x0000000004000000-0x00000000041fffff]
[ 0.000000] node 0: [mem 0x0000000004200000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] cma: Reserved 96 MiB at 0x00000000ba000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS resident on physical CPU 0x0
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 19 pages/cpu s37544 r8192 d32088 u77824
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2064384
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio32,0xf0512000 root=/dev/mmcblk1p1 rw rootwait pci=pcie_bus_safe cpuidle.off=1 cma=96M oops=panic panic=15
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000b6000000-0x00000000ba000000] (64MB)
[ 0.000000] Memory: 8038016K/8388608K available (14528K kernel code, 1232K rwdata, 4472K rodata, 2752K init, 488K bss, 252288K reserved, 98304K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f022f000
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32)
[ 0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32)
[ 0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32)
[ 0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32)
[ 0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.008211] Console: colour dummy device 80x25
[ 0.012745] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[ 0.023244] pid_max: default: 32768 minimum: 301
[ 0.027944] LSM: Security Framework initializing
[ 0.032728] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.040384] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.049003] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.056344] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.062611] rcu: Hierarchical SRCU implementation.
[ 0.062635] printk: bootconsole [uart8250] printing thread started
[ 0.073966] smp: Bringing up secondary CPUs ...
[ 0.074361] Detected PIPT I-cache on CPU1
[ 0.074391] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.090125] Detected PIPT I-cache on CPU2
[ 0.090147] CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
[ 0.090560] Detected PIPT I-cache on CPU3
[ 0.090576] CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
[ 0.090603] smp: Brought up 1 node, 4 CPUs
[ 0.090607] SMP: Total of 4 processors activated.
[ 0.090609] CPU features: detected: 32-bit EL0 Support
[ 0.090610] CPU features: detected: CRC32 instructions
[ 0.090642] CPU: All CPU(s) started at EL2
[ 0.090652] alternatives: patching kernel code
[ 0.091639] devtmpfs: initialized
[ 0.092989] KASLR enabled
[ 0.093027] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.093034] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.093697] pinctrl core: initialized pinctrl subsystem
[ 0.094104] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.177958] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.178150] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.178350] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.178371] audit: initializing netlink subsys (disabled)
[ 0.178428] audit: type=2000 audit(0.148:1): state=initialized audit_enabled=0 res=1
[ 0.178564] thermal_sys: Registered thermal governor 'step_wise'
[ 0.178829] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.227934] ASID allocator initialised with 32768 entries
[ 0.227937] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
[ 0.227939] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB
[ 0.227941] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
[ 0.227943] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB
[ 0.227982] Serial: AMBA PL011 UART driver
[ 0.267628] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.267631] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.267633] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.267635] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.267850] cryptd: max_cpu_qlen set to 1000
[ 0.334690] raid6: neonx8 gen() 6232 MB/s
[ 0.402719] raid6: neonx4 gen() 6388 MB/s
[ 0.470749] raid6: neonx2 gen() 5630 MB/s
[ 0.538783] raid6: neonx1 gen() 4345 MB/s
[ 0.606811] raid6: int64x8 gen() 3457 MB/s
[ 0.674843] raid6: int64x4 gen() 3743 MB/s
[ 0.742875] raid6: int64x2 gen() 3516 MB/s
[ 0.810906] raid6: int64x1 gen() 2669 MB/s
[ 0.810908] raid6: using algorithm neonx4 gen() 6388 MB/s
[ 0.878934] raid6: .... xor() 4720 MB/s, rmw enabled
[ 0.878936] raid6: using neon recovery algorithm
[ 0.879221] iommu: Default domain type: Translated
[ 0.879223] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.879309] SCSI subsystem initialized
[ 0.879434] usbcore: registered new interface driver usbfs
[ 0.879447] usbcore: registered new interface driver hub
[ 0.879457] usbcore: registered new device driver usb
[ 0.879516] usb_phy_generic cp0_usb3_phy0: supply vcc not found, using dummy regulator
[ 0.879555] usb_phy_generic cp0_usb3_phy0: dummy supplies not allowed for exclusive requests
[ 0.879677] pps_core: LinuxPPS API ver. 1 registered
[ 0.879679] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.879683] PTP clock support registered
[ 0.880068] vgaarb: loaded
[ 0.880177] clocksource: Switched to clocksource arch_sys_counter
[ 0.882432] NET: Registered PF_INET protocol family
[ 0.882554] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.884865] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.884895] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.884903] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.885091] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.885459] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.885502] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.885576] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.885727] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.886003] NET: Registered PF_XDP protocol family
[ 0.886009] PCI: CLS 0 bytes, default 64
[ 1.048012] Initialise system trusted keyrings
[ 1.048086] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[ 1.050213] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.050283] fuse: init (API version 7.36)
[ 1.068333] NET: Registered PF_ALG protocol family
[ 1.068340] xor: measuring software checksum speed
[ 1.069266] 8regs : 10663 MB/sec
[ 1.070124] 32regs : 11487 MB/sec
[ 1.071177] arm64_neon : 9364 MB/sec
[ 1.071179] xor: using function: 32regs (11487 MB/sec)
[ 1.071183] Key type asymmetric registered
[ 1.071184] Asymmetric key parser 'x509' registered
[ 1.071209] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.071212] io scheduler mq-deadline registered
[ 1.071214] io scheduler kyber registered
[ 1.124272] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver
[
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.19.0-rc2-00410-g9776fe0f424b (kabel@dellmb) (aarch64-unknown-linux-gnu-gcc (Gentoo Hardened 10.3.1_p20211126 p0) 10.3.1 20211126, GNU ld (Gentoo 2.37_p1 p2) 2.37) #491 SMP Mon Jun 20 11:00:54 CEST 2022
[ 0.000000] Machine model: Marvell Armada CN9130-CRB-B
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000f0512000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x23efd2140-0x23efd3fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] node 0: [mem 0x0000000004000000-0x00000000041fffff]
[ 0.000000] node 0: [mem 0x0000000004200000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] cma: Reserved 96 MiB at 0x00000000ba000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS resident on physical CPU 0x0
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 19 pages/cpu s37544 r8192 d32088 u77824
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2064384
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio32,0xf0512000 root=/dev/mmcblk1p1 rw rootwait pci=pcie_bus_safe cpuidle.off=1 cma=96M oops=panic panic=15
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000b6000000-0x00000000ba000000] (64MB)
[ 0.000000] Memory: 8038016K/8388608K available (14528K kernel code, 1232K rwdata, 4472K rodata, 2752K init, 488K bss, 252288K reserved, 98304K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f022f000
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32)
[ 0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32)
[ 0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32)
[ 0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32)
[ 0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.008197] Console: colour dummy device 80x25
[ 0.012742] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[ 0.023205] pid_max: default: 32768 minimum: 301
[ 0.027905] LSM: Security Framework initializing
[ 0.032654] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.040345] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.049002] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.056309] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.062567] rcu: Hierarchical SRCU implementation.
[ 0.062592] printk: bootconsole [uart8250] printing thread started
[ 0.073843] smp: Bringing up secondary CPUs ...
[ 0.074241] Detected PIPT I-cache on CPU1
[ 0.074269] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.074698] Detected PIPT I-cache on CPU2
[ 0.074719] CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
[ 0.100948] Detected PIPT I-cache on CPU3
[ 0.100963] CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
[ 0.100994] smp: Brought up 1 node, 4 CPUs
[ 0.100998] SMP: Total of 4 processors activated.
[ 0.101000] CPU features: detected: 32-bit EL0 Support
[ 0.101002] CPU features: detected: CRC32 instructions
[ 0.101033] CPU: All CPU(s) started at EL2
[ 0.101043] alternatives: patching kernel code
[ 0.102033] devtmpfs: initialized
[ 0.103419] KASLR enabled
[ 0.103460] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.103467] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.104134] pinctrl core: initialized pinctrl subsystem
[ 0.104540] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.175652] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.175845] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.176044] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.176063] audit: initializing netlink subsys (disabled)
[ 0.176110] audit: type=2000 audit(0.148:1): state=initialized audit_enabled=0 res=1
[ 0.176274] thermal_sys: Registered thermal governor 'step_wise'
[ 0.176527] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.176566] ASID allocator initialised with 32768 entries
[ 0.176569] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
[ 0.176571] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB
[ 0.176573] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
[ 0.176574] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB
[ 0.176615] Serial: AMBA PL011 UART driver
[ 0.264562] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.264566] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.264568] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.264570] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.264780] cryptd: max_cpu_qlen set to 1000
[ 0.330815] raid6: neonx8 gen() 6241 MB/s
[ 0.398847] raid6: neonx4 gen() 6390 MB/s
[ 0.466879] raid6: neonx2 gen() 5627 MB/s
[ 0.534915] raid6: neonx1 gen() 4346 MB/s
[ 0.602947] raid6: int64x8 gen() 3457 MB/s
[ 0.670976] raid6: int64x4 gen() 3743 MB/s
[ 0.739012] raid6: int64x2 gen() 3517 MB/s
[ 0.807044] raid6: int64x1 gen() 2668 MB/s
[ 0.807046] raid6: using algorithm neonx4 gen() 6390 MB/s
[ 0.875075] raid6: .... xor() 4719 MB/s, rmw enabled
[ 0.875077] raid6: using neon recovery algorithm
[ 0.875357] iommu: Default domain type: Translated
[ 0.875359] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.875450] SCSI subsystem initialized
[ 0.875564] usbcore: registered new interface driver usbfs
[ 0.875575] usbcore: registered new interface driver hub
[ 0.875586] usbcore: registered new device driver usb
[ 0.875647] usb_phy_generic cp0_usb3_phy0: supply vcc not found, using dummy regulator
[ 0.875683] usb_phy_generic cp0_usb3_phy0: dummy supplies not allowed for exclusive requests
[ 0.875809] pps_core: LinuxPPS API ver. 1 registered
[ 0.875810] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.875814] PTP clock support registered
[ 0.876217] vgaarb: loaded
[ 0.876322] clocksource: Switched to clocksource arch_sys_counter
[ 0.878568] NET: Registered PF_INET protocol family
[ 0.878689] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.881006] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.881034] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.881042] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.881228] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.881596] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.881638] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.881712] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.881857] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.882085] NET: Registered PF_XDP protocol family
[ 0.882090] PCI: CLS 0 bytes, default 64
[ 1.044253] Initialise system trusted keyrings
[ 1.044368] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[ 1.046489] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.046566] fuse: init (API version 7.36)
[ 1.064436] NET: Registered PF_ALG protocol family
[ 1.064443] xor: measuring software checksum speed
[ 1.065368] 8regs : 10663 MB/sec
[ 1.066229] 32regs : 11465 MB/sec
[ 1.067282] arm64_neon : 9364 MB/sec
[ 1.067283] xor: using function: 32regs (11465 MB/sec)
[ 1.067287] Key type asymmetric registered
[ 1.067288] Asymmetric key parser 'x509' registered
[ 1.067310] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.067313] io scheduler mq-deadline registered
[ 1.067314] io scheduler kyber registered
[ 1.120226] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver
[ 1.120603] armada-cp110-pinctrl f2440000.system-controller:pinctrl: registered pinctrl driver
[ 1.137975] mv_xor_v2 f0400000.xor: Marvell Version 2 XOR driver
[ 1.138248] mv_xor_v2 f0420000.xor: Marvell Version 2 XOR driver
[ 1.
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.19.0-rc2-00410-g9776fe0f424b (kabel@dellmb) (aarch64-unknown-linux-gnu-gcc (Gentoo Hardened 10.3.1_p20211126 p0) 10.3.1 20211126, GNU ld (Gentoo 2.37_p1 p2) 2.37) #491 SMP Mon Jun 20 11:00:54 CEST 2022
[ 0.000000] Machine model: Marvell Armada CN9130-CRB-B
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000f0512000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x23efd2140-0x23efd3fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] node 0: [mem 0x0000000004000000-0x00000000041fffff]
[ 0.000000] node 0: [mem 0x0000000004200000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] cma: Reserved 96 MiB at 0x00000000ba000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS resident on physical CPU 0x0
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 19 pages/cpu s37544 r8192 d32088 u77824
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2064384
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio32,0xf0512000 root=/dev/mmcblk1p1 rw rootwait pci=pcie_bus_safe cpuidle.off=1 cma=96M oops=panic panic=15
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000b6000000-0x00000000ba000000] (64MB)
[ 0.000000] Memory: 8038016K/8388608K available (14528K kernel code, 1232K rwdata, 4472K rodata, 2752K init, 488K bss, 252288K reserved, 98304K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f022f000
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32)
[ 0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32)
[ 0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32)
[ 0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32)
[ 0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.008220] Console: colour dummy device 80x25
[ 0.012710] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[ 0.023147] pid_max: default: 32768 minimum: 301
[ 0.027839] LSM: Security Framework initializing
[ 0.032571] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.040193] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.048796] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.056182] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.062432] rcu: Hierarchical SRCU implementation.
[ 0.062457] printk: bootconsole [uart8250] printing thread started
[ 0.073711] smp: Bringing up secondary CPUs ...
[ 0.074107] Detected PIPT I-cache on CPU1
[ 0.074136] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.074561] Detected PIPT I-cache on CPU2
[ 0.074583] CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
[ 0.100829] Detected PIPT I-cache on CPU3
[ 0.100844] CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
[ 0.100876] smp: Brought up 1 node, 4 CPUs
[ 0.100879] SMP: Total of 4 processors activated.
[ 0.100881] CPU features: detected: 32-bit EL0 Support
[ 0.100883] CPU features: detected: CRC32 instructions
[ 0.100916] CPU: All CPU(s) started at EL2
[ 0.100926] alternatives: patching kernel code
[ 0.101912] devtmpfs: initialized
[ 0.103320] KASLR enabled
[ 0.103361] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.103367] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.104031] pinctrl core: initialized pinctrl subsystem
[ 0.104435] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.175655] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.175846] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.176046] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.176067] audit: initializing netlink subsys (disabled)
[ 0.176113] audit: type=2000 audit(0.148:1): state=initialized audit_enabled=0 res=1
[ 0.176277] thermal_sys: Registered thermal governor 'step_wise'
[ 0.176530] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.176569] ASID allocator initialised with 32768 entries
[ 0.176572] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
[ 0.176574] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB
[ 0.176576] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
[ 0.176577] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB
[ 0.176618] Serial: AMBA PL011 UART driver
[ 0.264588] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.264591] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.264593] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.264595] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.264805] cryptd: max_cpu_qlen set to 1000
[ 0.330674] raid6: neonx8 gen() 6239 MB/s
[ 0.398706] raid6: neonx4 gen() 6385 MB/s
[ 0.466739] raid6: neonx2 gen() 5626 MB/s
[ 0.534771] raid6: neonx1 gen() 4341 MB/s
[ 0.602805] raid6: int64x8 gen() 3457 MB/s
[ 0.670836] raid6: int64x4 gen() 3743 MB/s
[ 0.738870] raid6: int64x2 gen() 3518 MB/s
[ 0.806909] raid6: int64x1 gen() 2670 MB/s
[ 0.806910] raid6: using algorithm neonx4 gen() 6385 MB/s
[ 0.874935] raid6: .... xor() 4714 MB/s, rmw enabled
[ 0.874937] raid6: using neon recovery algorithm
[ 0.875213] iommu: Default domain type: Translated
[ 0.875215] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.875305] SCSI subsystem initialized
[ 0.875419] usbcore: registered new interface driver usbfs
[ 0.875430] usbcore: registered new interface driver hub
[ 0.875442] usbcore: registered new device driver usb
[ 0.875502] usb_phy_generic cp0_usb3_phy0: supply vcc not found, using dummy regulator
[ 0.875538] usb_phy_generic cp0_usb3_phy0: dummy supplies not allowed for exclusive requests
[ 0.875660] pps_core: LinuxPPS API ver. 1 registered
[ 0.875661] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.875666] PTP clock support registered
[ 0.876066] vgaarb: loaded
[ 0.876172] clocksource: Switched to clocksource arch_sys_counter
[ 0.878422] NET: Registered PF_INET protocol family
[ 0.878542] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.880860] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.880889] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.880896] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.881082] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.881451] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.881495] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.881570] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.881715] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.881941] NET: Registered PF_XDP protocol family
[ 0.881946] PCI: CLS 0 bytes, default 64
[ 1.044028] Initialise system trusted keyrings
[ 1.044182] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[ 1.046287] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.046359] fuse: init (API version 7.36)
[ 1.064339] NET: Registered PF_ALG protocol family
[ 1.064346] xor: measuring software checksum speed
[ 1.065271] 8regs : 10662 MB/sec
[ 1.066130] 32regs : 11487 MB/sec
[ 1.067183] arm64_neon : 9361 MB/sec
[ 1.067185] xor: using function: 32regs (11487 MB/sec)
[ 1.067189] Key type asymmetric registered
[ 1.067190] Asymmetric key parser 'x509' registered
[ 1.067210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.067212] io scheduler mq-deadline registered
[ 1.067214] io scheduler kyber registered
[ 1.120098] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver
[ 1.120466] armada-cp110-pinctrl f2440000.system-controller:pinctrl: registered pinctrl driver
[ 1.137871] mv_xor_v2 f0400000.xor: Marvell Version 2 XOR driver
[ 1.138160] mv_xor_v2 f0420000.xor: Marvell Version 2 XOR driver
[
\
 
 \ /
  Last update: 2022-06-20 11:32    [W:0.177 / U:0.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site