lkml.org 
[lkml]   [2022]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 2/4] mfd: intel-m10-bmc: split into core and spi
Date


> -----Original Message-----
> From: Xu, Yilun <yilun.xu@intel.com>
> Sent: Monday, June 20, 2022 5:59 PM
> To: Zhang, Tianfei <tianfei.zhang@intel.com>
> Cc: lee.jones@linaro.org; Wu, Hao <hao.wu@intel.com>; trix@redhat.com;
> linux-kernel@vger.kernel.org; linux-fpga@vger.kernel.org; Weight, Russell H
> <russell.h.weight@intel.com>; matthew.gerlach@linux.intel.com
> Subject: Re: [PATCH v2 2/4] mfd: intel-m10-bmc: split into core and spi
>
> On Thu, Jun 16, 2022 at 10:04:03PM -0400, Tianfei Zhang wrote:
> > Split the common code from intel-m10-bmc driver into intel-m10-bmc-core.
> > intel-m10-bmc-core is the core MFD functions which can support
> > multiple bus interfaces like SPI bus.
>
> Please specify which else are you going to support, for better understanding.

There are lots of common code for intel-m10-bmc-spi and intel-m10-bmc-pmci driver.
To better support multiple bus interfaces and reduce the duplicate code ,
we like to split the common code into a core file.

>
> >
> > Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
> > ---
> > drivers/mfd/Kconfig | 30 +++---
> > drivers/mfd/Makefile | 5 +-
> > .../{intel-m10-bmc.c => intel-m10-bmc-core.c} | 101 +++++-------------
> > drivers/mfd/intel-m10-bmc-spi.c | 83 ++++++++++++++
> > include/linux/mfd/intel-m10-bmc.h | 15 +++
> > 5 files changed, 144 insertions(+), 90 deletions(-) rename
> > drivers/mfd/{intel-m10-bmc.c => intel-m10-bmc-core.c} (63%) create
> > mode 100644 drivers/mfd/intel-m10-bmc-spi.c
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index
> > 3b59456f5545..ee8398b02321 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -2158,18 +2158,24 @@ config SGI_MFD_IOC3
> > If you have an SGI Origin, Octane, or a PCI IOC3 card,
> > then say Y. Otherwise say N.
> >
> > -config MFD_INTEL_M10_BMC
> > - tristate "Intel MAX 10 Board Management Controller"
> > - depends on SPI_MASTER
> > - select REGMAP_SPI_AVMM
> > - select MFD_CORE
> > - help
> > - Support for the Intel MAX 10 board management controller using the
> > - SPI interface.
> > -
> > - This driver provides common support for accessing the device,
> > - additional drivers must be enabled in order to use the functionality
> > - of the device.
> > +config MFD_INTEL_M10_BMC_CORE
> > + tristate
> > + select MFD_CORE
> > + select REGMAP
> > + default n
> > +
> > +config MFD_INTEL_M10_BMC_SPI
> > + tristate "Intel MAX 10 Board Management Controller with SPI"
> > + depends on SPI_MASTER
> > + select MFD_INTEL_M10_BMC_CORE
> > + select REGMAP_SPI_AVMM
> > + help
> > + Support for the Intel MAX 10 board management controller using the
> > + SPI interface.
> > +
> > + This driver provides common support for accessing the
> > + device,
>
> device by SPI,

I will fix it on next version patch.
>
> > + additional drivers must be enabled in order to use the functionality
> > + of the device.
> >
> > config MFD_RSMU_I2C
> > tristate "Renesas Synchronization Management Unit with I2C"
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index
> > 858cacf659d6..b5d3263c1205 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -266,7 +266,10 @@ obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-
> pm8008.o
> >
> > obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
> > obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
> > -obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
> > +
> > +intel-m10-bmc-objs := intel-m10-bmc-core.o
> > +obj-$(CONFIG_MFD_INTEL_M10_BMC_CORE) += intel-m10-bmc.o
>
> Why make a intel-m10-bmc obj here? What's the problem of intel-m10-bmc-
> core.o?

This intel-m10-bmc-objs is for CONFIG_MFD_INTEL_M10_BMC_CORE.
So if want to support intel-m10-bmc-spi driver, it should set both CONFIG_MFD_INTEL_M10_BMC_CORE
and CONFIG_MFD_INTEL_M10_BMC_SPI in .config file.

Here is another example in drivers/mfd/Makefile.

intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o

>
> > +obj-$(CONFIG_MFD_INTEL_M10_BMC_SPI) += intel-m10-bmc-spi.o
> >
> > obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o
> > obj-$(CONFIG_MFD_ATC260X_I2C) += atc260x-i2c.o
> > diff --git a/drivers/mfd/intel-m10-bmc.c
> > b/drivers/mfd/intel-m10-bmc-core.c
> > similarity index 63%
> > rename from drivers/mfd/intel-m10-bmc.c rename to
> > drivers/mfd/intel-m10-bmc-core.c index 7e521df29c72..f6dc549e1bc3
> > 100644
> > --- a/drivers/mfd/intel-m10-bmc.c
> > +++ b/drivers/mfd/intel-m10-bmc-core.c
> > @@ -1,23 +1,14 @@
> > // SPDX-License-Identifier: GPL-2.0
> > /*
> > - * Intel MAX 10 Board Management Controller chip
> > + * Intel MAX 10 Board Management Controller chip - common code
> > *
> > - * Copyright (C) 2018-2020 Intel Corporation. All rights reserved.
> > + * Copyright (C) 2018-2022 Intel Corporation. All rights reserved.
> > */
> > #include <linux/bitfield.h>
> > #include <linux/init.h>
> > #include <linux/mfd/core.h>
> > #include <linux/mfd/intel-m10-bmc.h>
> > #include <linux/module.h>
> > -#include <linux/mutex.h>
> > -#include <linux/regmap.h>
> > -#include <linux/spi/spi.h>
> > -
> > -enum m10bmc_type {
> > - M10_N3000,
> > - M10_D5005,
> > - M10_N5010,
> > -};
> >
> > static struct mfd_cell m10bmc_d5005_subdevs[] = {
> > { .name = "d5005bmc-hwmon" },
> > @@ -33,26 +24,6 @@ static struct mfd_cell m10bmc_n5010_subdevs[] = {
> > { .name = "n5010bmc-hwmon" },
> > };
> >
> > -static const struct regmap_range m10bmc_regmap_range[] = {
> > - regmap_reg_range(M10BMC_LEGACY_BUILD_VER,
> M10BMC_LEGACY_BUILD_VER),
> > - regmap_reg_range(M10BMC_SYS_BASE, M10BMC_SYS_END),
> > - regmap_reg_range(M10BMC_FLASH_BASE, M10BMC_FLASH_END),
> > -};
> > -
> > -static const struct regmap_access_table m10bmc_access_table = {
> > - .yes_ranges = m10bmc_regmap_range,
> > - .n_yes_ranges = ARRAY_SIZE(m10bmc_regmap_range),
> > -};
> > -
> > -static struct regmap_config intel_m10bmc_regmap_config = {
> > - .reg_bits = 32,
> > - .val_bits = 32,
> > - .reg_stride = 4,
> > - .wr_table = &m10bmc_access_table,
> > - .rd_table = &m10bmc_access_table,
> > - .max_register = M10BMC_MEM_END,
> > -};
>
> Why remove all these configurations, I suppose it is not related to bus type.

This intel_m10bmc_regmap_config has removed to intel-m10-bmc-spi driver, it is related to SPI bus.

>
> > -
> > static ssize_t bmc_version_show(struct device *dev,
> > struct device_attribute *attr, char *buf) { @@
> -131,7 +102,16 @@
> > static struct attribute *m10bmc_attrs[] = {
> > &dev_attr_mac_count.attr,
> > NULL,
> > };
> > -ATTRIBUTE_GROUPS(m10bmc);
> > +
> > +static const struct attribute_group m10bmc_group = {
> > + .attrs = m10bmc_attrs,
> > +};
> > +
> > +const struct attribute_group *m10bmc_dev_groups[] = {
> > + &m10bmc_group,
> > + NULL,
> > +};
> > +EXPORT_SYMBOL_GPL(m10bmc_dev_groups);
> >
> > static int check_m10bmc_version(struct intel_m10bmc *ddata) { @@
> > -158,37 +138,21 @@ static int check_m10bmc_version(struct intel_m10bmc
> *ddata)
> > return 0;
> > }
> >
> > -static int intel_m10_bmc_spi_probe(struct spi_device *spi)
> > +int m10bmc_dev_init(struct intel_m10bmc *m10bmc)
> > {
> > - const struct spi_device_id *id = spi_get_device_id(spi);
> > - struct device *dev = &spi->dev;
> > + enum m10bmc_type type = m10bmc->type;
> > struct mfd_cell *cells;
> > - struct intel_m10bmc *ddata;
> > int ret, n_cell;
> >
> > - ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
> > - if (!ddata)
> > - return -ENOMEM;
> > -
> > - ddata->dev = dev;
> > -
> > - ddata->regmap =
> > - devm_regmap_init_spi_avmm(spi,
> &intel_m10bmc_regmap_config);
> > - if (IS_ERR(ddata->regmap)) {
> > - ret = PTR_ERR(ddata->regmap);
> > - dev_err(dev, "Failed to allocate regmap: %d\n", ret);
> > - return ret;
> > - }
> > -
> > - spi_set_drvdata(spi, ddata);
> > + dev_set_drvdata(m10bmc->dev, m10bmc);
>
> The naming is not consistent here, some are ddata, some are m10bmc, please
> keep a unified name acress all the patches.

I agree, I will fix it.

>
> >
> > - ret = check_m10bmc_version(ddata);
> > + ret = check_m10bmc_version(m10bmc);
> > if (ret) {
> > - dev_err(dev, "Failed to identify m10bmc hardware\n");
> > + dev_err(m10bmc->dev, "Failed to identify m10bmc
> hardware\n");
>
> Keep the dev local variable so that we don't have to change every related lines.

I agree, I will fix it.

>
> > return ret;
> > }
> >
> > - switch (id->driver_data) {
> > + switch (type) {
> > case M10_N3000:
> > cells = m10bmc_pacn3000_subdevs;
> > n_cell = ARRAY_SIZE(m10bmc_pacn3000_subdevs);
> > @@ -205,33 +169,16 @@ static int intel_m10_bmc_spi_probe(struct
> spi_device *spi)
> > return -ENODEV;
> > }
> >
> > - ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, cells,
> n_cell,
> > - NULL, 0, NULL);
> > + ret = devm_mfd_add_devices(m10bmc->dev, PLATFORM_DEVID_AUTO,
> > + cells, n_cell, NULL, 0, NULL);
>
> ditto
>
> > if (ret)
> > - dev_err(dev, "Failed to register sub-devices: %d\n", ret);
> > + dev_err(m10bmc->dev, "Failed to register sub-devices: %d\n",
> > + ret);
>
> ditto
>
> >
> > return ret;
> > }
> > +EXPORT_SYMBOL_GPL(m10bmc_dev_init);
> >
> > -static const struct spi_device_id m10bmc_spi_id[] = {
> > - { "m10-n3000", M10_N3000 },
> > - { "m10-d5005", M10_D5005 },
> > - { "m10-n5010", M10_N5010 },
> > - { }
> > -};
> > -MODULE_DEVICE_TABLE(spi, m10bmc_spi_id);
> > -
> > -static struct spi_driver intel_m10bmc_spi_driver = {
> > - .driver = {
> > - .name = "intel-m10-bmc",
> > - .dev_groups = m10bmc_groups,
> > - },
> > - .probe = intel_m10_bmc_spi_probe,
> > - .id_table = m10bmc_spi_id,
> > -};
> > -module_spi_driver(intel_m10bmc_spi_driver);
> > -
> > -MODULE_DESCRIPTION("Intel MAX 10 BMC Device Driver");
> > +MODULE_DESCRIPTION("Intel MAX 10 BMC core MFD driver");
> > MODULE_AUTHOR("Intel Corporation");
> > MODULE_LICENSE("GPL v2");
> > -MODULE_ALIAS("spi:intel-m10-bmc");
> > diff --git a/drivers/mfd/intel-m10-bmc-spi.c
> > b/drivers/mfd/intel-m10-bmc-spi.c new file mode 100644 index
> > 000000000000..9cafbc0f89f0
> > --- /dev/null
> > +++ b/drivers/mfd/intel-m10-bmc-spi.c
> > @@ -0,0 +1,83 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Intel MAX 10 Board Management Controller chip
>
> SPI driver for Intel MAX 10 ...

This is good for me.

>
> > + *
> > + * Copyright (C) 2018-2021 Intel Corporation. All rights reserved.
> > + */
> > +#include <linux/bitfield.h>
> > +#include <linux/init.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/mfd/intel-m10-bmc.h>
> > +#include <linux/module.h>
> > +#include <linux/regmap.h>
> > +#include <linux/spi/spi.h>
> > +
> > +static const struct regmap_range m10bmc_regmap_range[] = {
> > + regmap_reg_range(M10BMC_LEGACY_BUILD_VER,
> M10BMC_LEGACY_BUILD_VER),
> > + regmap_reg_range(M10BMC_SYS_BASE, M10BMC_SYS_END),
> > + regmap_reg_range(M10BMC_FLASH_BASE, M10BMC_FLASH_END), };
> > +
> > +static const struct regmap_access_table m10bmc_access_table = {
> > + .yes_ranges = m10bmc_regmap_range,
> > + .n_yes_ranges = ARRAY_SIZE(m10bmc_regmap_range),
> > +};
> > +
> > +static struct regmap_config intel_m10bmc_regmap_config = {
> > + .reg_bits = 32,
> > + .val_bits = 32,
> > + .reg_stride = 4,
> > + .wr_table = &m10bmc_access_table,
> > + .rd_table = &m10bmc_access_table,
> > + .max_register = M10BMC_MEM_END,
> > +};
> > +
> > +static int intel_m10_bmc_spi_probe(struct spi_device *spi) {
> > + const struct spi_device_id *id = spi_get_device_id(spi);
> > + struct device *dev = &spi->dev;
> > + struct intel_m10bmc *ddata;
> > + int ret;
> > +
> > + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
> > + if (!ddata)
> > + return -ENOMEM;
> > +
> > + ddata->dev = dev;
> > + ddata->type = (enum m10bmc_type)(id->driver_data);
> > +
> > + ddata->regmap =
> > + devm_regmap_init_spi_avmm(spi,
> &intel_m10bmc_regmap_config);
> > + if (IS_ERR(ddata->regmap)) {
> > + ret = PTR_ERR(ddata->regmap);
> > + dev_err(dev, "Failed to allocate regmap: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + spi_set_drvdata(spi, ddata);
>
> Why we need this? I saw the dev.drvdata is set in core driver.

I agree, it is duplicate, we can remove it.

>
> > +
> > + return m10bmc_dev_init(ddata);
> > +}
> > +
> > +static const struct spi_device_id m10bmc_spi_id[] = {
> > + { "m10-n3000", M10_N3000 },
> > + { "m10-d5005", M10_D5005 },
> > + { "m10-n5010", M10_N5010 },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(spi, m10bmc_spi_id);
> > +
> > +static struct spi_driver intel_m10bmc_spi_driver = {
> > + .driver = {
> > + .name = "intel-m10-bmc",
>
> Need renaming?

How about "intel-m10-bmc-spi"?

>
> > + .dev_groups = m10bmc_dev_groups,
> > + },
> > + .probe = intel_m10_bmc_spi_probe,
> > + .id_table = m10bmc_spi_id,
> > +};
> > +module_spi_driver(intel_m10bmc_spi_driver);
> > +
> > +MODULE_DESCRIPTION("Intel MAX 10 BMC SPI bus interface");
> > +MODULE_AUTHOR("Intel Corporation"); MODULE_LICENSE("GPL");
> > +MODULE_ALIAS("spi:intel-m10-bmc");
> > diff --git a/include/linux/mfd/intel-m10-bmc.h
> > b/include/linux/mfd/intel-m10-bmc.h
> > index f0044b14136e..dd81ffdcf168 100644
> > --- a/include/linux/mfd/intel-m10-bmc.h
> > +++ b/include/linux/mfd/intel-m10-bmc.h
> > @@ -118,14 +118,23 @@
> > /* Address of 4KB inverted bit vector containing staging area FLASH count */
> > #define STAGING_FLASH_COUNT 0x17ffb000
> >
> > +/* Supported MAX10 BMC types */
>
> Please use correct format for kernel doc comments

I will fix it on next version patch.

>
> > +enum m10bmc_type {
> > + M10_N3000,
> > + M10_D5005,
> > + M10_N5010,
> > +};
> > +
> > /**
> > * struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure
> > * @dev: this device
> > * @regmap: the regmap used to access registers by m10bmc itself
> > + * @type: the type of MAX10 BMC
> > */
> > struct intel_m10bmc {
> > struct device *dev;
> > struct regmap *regmap;
> > + enum m10bmc_type type;
> > };
> >
> > /*
> > @@ -159,4 +168,10 @@ m10bmc_raw_read(struct intel_m10bmc *m10bmc,
> > unsigned int addr, #define m10bmc_sys_read(m10bmc, offset, val) \
> > m10bmc_raw_read(m10bmc, M10BMC_SYS_BASE + (offset), val)
> >
> > +/*
> > + * MAX10 BMC Core support
> > + */
> > +int m10bmc_dev_init(struct intel_m10bmc *m10bmc); extern const struct
> > +attribute_group *m10bmc_dev_groups[];
> > +
> > #endif /* __MFD_INTEL_M10_BMC_H */
> > --
> > 2.26.2

\
 
 \ /
  Last update: 2022-06-21 02:57    [W:1.648 / U:0.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site