lkml.org 
[lkml]   [2022]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectPM runtime_error handling missing in many drivers?
Many drivers do something like the following to resume their hardware
before performing some hardware access when user space ask for it:

ret = pm_runtime_resume_and_get(dev);
if (ret)
return ret;

But if the ->runtime_resume() callback fails, then the
power.runtime_error is set and any further attempts to use
pm_runtime_resume_and_get() will fail, as documented in
Documentation/power/runtime_pm.rst.

This means that if a driver sees an error even once from, say, an I2C
transaction in its ->runtime_resume() callback, then the driver will
permanently stop to work. My guess is that this is *not* the behaviour
intended by driver writers. I would expect that the driver re-attempts
to access the hardware the next time user space tries to use the device,
so that the driver is resilient against temporary failures.

I noticed this with drivers/iio/light/vcnl4000.c.

During a read of iio:device0/in_illuminance_raw, an error is injected
into the I2C transaction (the dump_stack() indicates the location) and
the I2C transaction fails:

[110190.730000][ T27] rpm_resume: 0-0009 flags-4 cnt-1 dep-0 auto-1 p-0 irq-0 child-0
[110190.730000][ T27] i2c_write: i2c-0 #0 a=009 f=0000 l=3 [00-00-00]
[110778.040000][ T27] i2c_result: i2c-0 n=1 ret=0
[110778.040000][ T27] CPU: 0 PID: 27 Comm: python3 Not tainted 5.19.0-rc3+ #71
[110778.040000][ T27] Stack:
[110778.040000][ T27] 60a27dc6 60a27dc6 688af710 61085fc0
[110778.040000][ T27] 61085f90 60a27dc6 60069bf0 00000001
[110778.040000][ T27] 688af750 60905626 609055b3 61085fe0
[110778.040000][ T27] Call Trace:
[110778.040000][ T27] [<608d05dc>] show_stack.cold+0x166/0x2a7
[110778.040000][ T27] [<60905626>] dump_stack_lvl+0x73/0x92
[110778.040000][ T27] [<6090566e>] dump_stack+0x29/0x31
[110778.040000][ T27] [<6092463e>] __i2c_transfer.cold+0x28/0x49
[110778.040000][ T27] [<607445dd>] i2c_smbus_xfer_emulated+0x28d/0xc60
[110778.040000][ T27] [<607452c2>] __i2c_smbus_xfer+0x312/0x8e0
[110778.040000][ T27] [<60745a40>] i2c_smbus_xfer+0x1b0/0x2e0
[110778.040000][ T27] [<60745e76>] i2c_smbus_write_word_data+0x46/0x60
[110778.040000][ T27] [<68968755>] vcnl4200_set_power_state+0x45/0x160 [vcnl4000]
[110778.040000][ T27] [<689680ee>] vcnl4000_runtime_resume+0x2e/0x40 [vcnl4000]
[110778.040000][ T27] [<606d262f>] __rpm_callback+0x5f/0x3e0
[110778.040000][ T27] [<606d2b44>] rpm_callback+0x194/0x1e0
[110778.040000][ T27] [<606d48fb>] rpm_resume+0xd5b/0x11d0
[110778.040000][ T27] [<606d5a77>] __pm_runtime_resume+0xb7/0x120
[110778.040000][ T27] [<68969903>] vcnl4000_set_pm_runtime_state.isra.0+0x43/0x1f0 [vcnl4000]
[110778.040000][ T27] [<68969b36>] vcnl4000_read_raw+0x86/0x250 [vcnl4000]
[110778.040000][ T27] [<607794fd>] iio_read_channel_info+0x10d/0x130
[110778.040000][ T27] [<60698553>] dev_attr_show+0x23/0x80
[110778.040000][ T27] [<60441174>] sysfs_kf_seq_show+0x144/0x2d0
[110778.040000][ T27] [<6043ce9e>] kernfs_seq_show+0x2e/0x40
[110778.040000][ T27] [<6033fe40>] seq_read_iter+0x310/0xb20
[110778.040000][ T27] [<6043e0ea>] kernfs_fop_read_iter+0x2da/0x520
[110778.040000][ T27] [<602cd46e>] new_sync_read+0x1ae/0x2f0
[110778.040000][ T27] [<602d1e84>] vfs_read+0x344/0x4a0
[110778.040000][ T27] [<602d2885>] ksys_read+0xb5/0x270
[110778.040000][ T27] [<602d2a63>] sys_read+0x23/0x30
[110778.040000][ T27] [<60051aea>] handle_syscall+0x1ba/0x250
[110778.040000][ T27] [<6006be9b>] userspace+0x3bb/0x600
[110778.040000][ T27] [<60047c8b>] fork_handler+0xcb/0xe0
[110778.040000][ T27] rpm_idle: i2c-0 flags-5 cnt-0 dep-0 auto-1 p-0 irq-0 child-0
[110778.040000][ T27] rpm_return_int: rpm_idle+0x250/0x970:i2c-0 ret=-11
[110778.040000][ T27] rpm_return_int: rpm_resume+0x24d/0x11d0:0-0009 ret=-5

The above is OK, the read of the file naturally fails since
pm_runtime_resume_and_get() fails. But all further reads of the file
from user space fail even before getting to any register access, due to
the behaviour described above.

[110778.050000][ T27] rpm_resume: 0-0009 flags-4 cnt-1 dep-0 auto-1 p-0 irq-0 child-0
[110778.050000][ T27] rpm_return_int: rpm_resume+0x24d/0x11d0:0-0009 ret=-22

The following patch fixes the issue on vcnl4000, but is this the right
fix? And, unless I'm missing something, there are dozens of drivers
with the same problem.

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index e02e92bc2928..082b8969fe2f 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -414,6 +414,8 @@ static int vcnl4000_set_pm_runtime_state(struct vcnl4000_data *data, bool on)

if (on) {
ret = pm_runtime_resume_and_get(dev);
+ if (ret)
+ pm_runtime_set_suspended(dev);
} else {
pm_runtime_mark_last_busy(dev);
ret = pm_runtime_put_autosuspend(dev);
\
 
 \ /
  Last update: 2022-06-20 17:07    [W:0.088 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site