lkml.org 
[lkml]   [2022]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v6 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
From

On 6/2/22 8:14 AM, Rob Herring wrote:
> On Wed, Jun 01, 2022 at 12:05:09PM -0700, Tanmay Shah wrote:
>> Hi Rob,
>>
>> Thanks for reviews. Please find my comments below:
>>
>> On 6/1/22 11:42 AM, Rob Herring wrote:
>>> On Tue, May 31, 2022 at 04:43:05PM -0700, Tanmay Shah wrote:
>>>> Xilinx ZynqMP platform has dual-core ARM Cortex R5 Realtime Processing
>>>> Unit(RPU) subsystem. This patch adds dt-bindings for RPU subsystem
>>>> (cluster).
>>>>
>>>> Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
>>>> ---
>>>>
>>>> Changes in v6:
>>>> - Add maxItems to sram and memory-region property
>>>>
>>>> Changes in v5:
>>>> - Add constraints of the possible values of xlnx,cluster-mode property
>>>> - fix description of power-domains property for r5 core
>>>> - Remove reg, address-cells and size-cells properties as it is not required
>>>> - Fix description of mboxes property
>>>> - Add description of each memory-region and remove old .txt binding link
>>>> reference in the description
>>>>
>>>> Changes in v4:
>>>> - Add memory-region, mboxes and mbox-names properties in example
>>>>
>>>> Changes in v3:
>>>> - None
>>>>
>>>>
>>>> .../bindings/remoteproc/xlnx,r5f-rproc.yaml | 129 ++++++++++++++++++
>>>> include/dt-bindings/power/xlnx-zynqmp-power.h | 6 +
>>>> 2 files changed, 135 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>>>> new file mode 100644
>>>> index 000000000000..cbff1c201a89
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>>>> @@ -0,0 +1,129 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/remoteproc/xlnx,r5f-rproc.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Xilinx R5F processor subsystem
>>>> +
>>>> +maintainers:
>>>> + - Ben Levinsky <ben.levinsky@xilinx.com>
>>>> + - Tanmay Shah <tanmay.shah@xilinx.com>
>>>> +
>>>> +description: |
>>>> + The Xilinx platforms include a pair of Cortex-R5F processors (RPU) for
>>>> + real-time processing based on the Cortex-R5F processor core from ARM.
>>>> + The Cortex-R5F processor implements the Arm v7-R architecture and includes a
>>>> + floating-point unit that implements the Arm VFPv3 instruction set.
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + const: xlnx,zynqmp-r5fss
>>>> +
>>>> + xlnx,cluster-mode:
>>>> + $ref: /schemas/types.yaml#/definitions/uint32
>>>> + enum: [0, 1, 2]
>>>> + description: |
>>>> + The RPU MPCore can operate in split mode(Dual-processor performance), Safety
>>>> + lock-step mode(Both RPU cores execute the same code in lock-step,
>>>> + clock-for-clock) or Single CPU mode (RPU core 0 can be held in reset while
>>>> + core 1 runs normally). The processor does not support dynamic configuration.
>>>> + Switching between modes is only permitted immediately after a processor reset.
>>>> + If set to 1 then lockstep mode and if 0 then split mode.
>>>> + If set to 2 then single CPU mode. When not defined, default will be lockstep mode.
>>>> +
>>>> +patternProperties:
>>>> + "^r5f-[a-f0-9]+$":
>>>> + type: object
>>>> + description: |
>>>> + The RPU is located in the Low Power Domain of the Processor Subsystem.
>>>> + Each processor includes separate L1 instruction and data caches and
>>>> + tightly coupled memories (TCM). System memory is cacheable, but the TCM
>>>> + memory space is non-cacheable.
>>>> +
>>>> + Each RPU contains one 64KB memory and two 32KB memories that
>>>> + are accessed via the TCM A and B port interfaces, for a total of 128KB
>>>> + per processor. In lock-step mode, the processor has access to 256KB of
>>>> + TCM memory.
>>>> +
>>>> + properties:
>>>> + compatible:
>>>> + const: xlnx,zynqmp-r5f
>>>> +
>>>> + power-domains:
>>>> + description: RPU core PM domain specifier
>>>> + maxItems: 1
>>>> +
>>>> + mboxes:
>>>> + minItems: 1
>>>> + items:
>>>> + - description: mailbox channel to send data to RPU
>>>> + - description: mailbox channel to receive data from RPU
>>>> +
>>>> + mbox-names:
>>>> + minItems: 1
>>>> + items:
>>>> + - const: tx
>>>> + - const: rx
>>>> +
>>>> + sram:
>>>> + $ref: /schemas/types.yaml#/definitions/phandle-array
>>>> + maxItems: 8
>>> minItems: 1
>>> maxItems: 8
>>> items:
>>> maxItems: 1
>> I have posted v7 which adds "minItems: 1".
>>
>> However, I didn't get items: part. Is it required to have items: now?
> Yes.
>> Can I add items: part once TCM bindings are posted?
> No.
>
>> I understand that minItems and maxItems under sram property decides how many
>> phandles sram can have.
>>
>> However, maxItems: 1 under items: field what it describes?
> 'phandle-array' is really a matrix type because we can have phandles
> plus argument cells. So you have to define each of the 1-8 entries is a
> single phandle cell (and no arg cells).

Thanks for explanation. I will send new revision as suggested.

>
> Rob

\
 
 \ /
  Last update: 2022-06-02 18:09    [W:0.364 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site