lkml.org 
[lkml]   [2022]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/2] dt-bindings: backlight: rt4831: Add the new property for ocp level selection
From
On 02/06/2022 15:56, Rob Herring wrote:
> On Thu, May 26, 2022 at 12:32:12PM +0200, Krzysztof Kozlowski wrote:
>> On 26/05/2022 10:13, ChiYuan Huang wrote:
>>> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> 於 2022年5月26日 週四 下午4:06寫道:
>>>>
>>>> On 26/05/2022 05:16, cy_huang wrote:
>>>>> From: ChiYuan Huang <cy_huang@richtek.com>
>>>>>
>>>>> Add the new property for ocp level selection.
>>>>>
>>>>> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
>>>>> ---
>>>>> .../bindings/leds/backlight/richtek,rt4831-backlight.yaml | 8 ++++++++
>>>>> include/dt-bindings/leds/rt4831-backlight.h | 5 +++++
>>>>> 2 files changed, 13 insertions(+)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
>>>>> index e0ac686..c1c59de 100644
>>>>> --- a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
>>>>> +++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
>>>>> @@ -47,6 +47,14 @@ properties:
>>>>> minimum: 0
>>>>> maximum: 3
>>>>>
>>>>> + richtek,bled-ocp-sel:
>>>>
>>>> Skip "sel" as it is a shortcut of selection. Name instead:
>>>> "richtek,backlight-ocp"
>>>>
>>> OK, if so, do I need to rename all properties from 'bled' to 'backlight' ?
>>> If only this property is naming as 'backlight'. it may conflict with
>>> the others like as "richtek,bled-ovp-sel".
>>
>> Ah, no, no need.
>>
>>>>
>>>>> + description: |
>>>>> + Backlight OCP level selection, currently support 0.9A/1.2A/1.5A/1.8A
>>>>
>>>> Could you explain here what is OCP (unfold the acronym)?
>>> Yes. And the full name is 'over current protection'.
>>
>> Thanks and this leads to second thing - you encode register value
>> instead of logical value. This must be a logical value in mA, so
>> "richtek,bled-ocp-microamp".
>
> We already have common properties for setting current of LEDs. We should
> use that here I think.

It might not be exactly the same. We have "led-max-microamp" which is
the maximum allowed current. I guess over-current protection level is
slightly higher (e.g. led-max-microamp + 1). IOW, led-max-microamp is
something which still can be set and used by system/hardware. OCP should
not.


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-06-02 15:59    [W:0.071 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site