lkml.org 
[lkml]   [2022]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND v12 0/3] mmc: mediatek: add support for SDIO async IRQ
From
Date
Hi,

Gentle ping for this set.

On Wed, 2022-05-25 at 09:51 +0800, Axe Yang wrote:
> Changes in v12:
> - assign NULL to pins_eint directly instead of using kfree()
>
> Changes in v11:
> - remove '_irq' suffix in interrupts-names property
> - fix yaml example build error
> - refactor msdc_enable_sdio_irq(), free pins_eint if async irq is not
> supported
>
> Changes in v10:
> - add sample node for SDIO host which support wakeup interrupt in
> yaml
> - skip MMC_PM_WAKE_SDIO_IRQ check before enable SDIO async interrupt
> - add MMC_PM_KEEP_POWER check before SDIO eint pinstate parsing
> - use dev_pm_set_dedicated_wake_irq_reverse() to correct irq control
> sequence
> - set dedicated irq in msdc_enable_sdio_irq() rather than
> msdc_drv_probe()
> - remove unnecessary wake irq control, rpm/dpm system shall manage
> that
> - move wake irq/msdc irq control back to system suspend phase, use
> rpm_suspend
> and rpm_resume to ensure irq control sequence:
> disable msdc irq -> enable wake irq -> disable wake irq ->
> enable msdc irq
> - simplify variables, check pins_eint to know whether wakeup settings
> are managed
>
> Changes in v9:
> - remove pinctrl "state_dat1"
>
> Changes in v8:
> - remove maxItems property under pinctrl-names property
>
> Changes in v7:
> - add device_init_wakeup() to register SDIO host as wakeup source
>
> Changes in v6:
> - abandon cap-sdio-async-irq flag, use wakeup-source flag instead
> - extend interrupts and pinctrls in mediatek mmc host controller DT
> documents
> - add mmc_card_enable_async_irq() to access enable_async_irq flag
> - simplify wakeup irq implementation with dedicate wake up irq
> related interface
>
> Changes in v5:
> - resort variables to reversed xmas tree order
> - restore old copyright year range and add current year back
>
> Changes in v4:
> - add MMC_CAP2_SDIO_ASYNC_IRQ judge before lookup eint pinctrl
> - replace spin_lock_irqsave() variant with spin_lock() in eint irq
> handler
>
> Changes in v3:
> - correct abbreviations with capital letters in commit message
> - replace copyright year with 2022 in mtk-sd.c
> - remove unnessary pointer casting
> - adjust variable order to reversed xmas tree
> - remove a redundant blank line
> - refine if statement, following standard pattern
>
> Changes in v2:
> - change flag name from 'cap-sdio-async-int' to 'cap-sdio-async-irq'
> - change corresponding macro names from xxx_INT to xxx_IRQ
> - resort new member in msdc_host structure
> - refine function msdc_request_dat1_eint_irq()
> - rename msdc_{suspend,resume} function names, add suffix '_noirq'
> - add MMC_CAP2_NO_SDIO judgement before parse eint related pin
> setting
>
> Axe Yang (3):
> dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties
> mmc: core: Add support for SDIO wakeup interrupt
> mmc: mediatek: add support for SDIO eint wakup IRQ
>
> .../devicetree/bindings/mmc/mtk-sd.yaml | 50 +++++++++++-
> drivers/mmc/core/sdio.c | 14 ++++
> drivers/mmc/host/mtk-sd.c | 80
> +++++++++++++++++--
> include/linux/mmc/card.h | 8 +-
> include/linux/mmc/sdio.h | 5 ++
> 5 files changed, 149 insertions(+), 8 deletions(-)
>

\
 
 \ /
  Last update: 2022-06-02 08:08    [W:0.223 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site