lkml.org 
[lkml]   [2022]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] spi: spi-mem: Fix spi_mem_poll_status()
Date
From: Patrice Chotard <patrice.chotard@foss.st.com>

In spi_mem_exec_op(), in case cs_gpiod descriptor is set, exec_op()
callback can't be used.
The same must be applied in spi_mem_poll_status(), poll_status()
callback can't be used, we must use the legacy path using
read_poll_timeout().

Tested on STM32mp257c-ev1 specific evaluation board on which a
spi-nand was mounted instead of a spi-nor.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
drivers/spi/spi-mem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index e8de4f5017cd..0c79193d9697 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -808,7 +808,7 @@ int spi_mem_poll_status(struct spi_mem *mem,
op->data.dir != SPI_MEM_DATA_IN)
return -EINVAL;

- if (ctlr->mem_ops && ctlr->mem_ops->poll_status) {
+ if (ctlr->mem_ops && ctlr->mem_ops->poll_status && !mem->spi->cs_gpiod) {
ret = spi_mem_access_start(mem);
if (ret)
return ret;
--
2.25.1
\
 
 \ /
  Last update: 2022-06-02 11:11    [W:0.035 / U:1.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site