lkml.org 
[lkml]   [2022]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/3] dt-bindings: iommu: mediatek: add binding documentation for MT8365 SoC
From
Date
On 6/2/22 2:18 PM, Yong Wu wrote:
> On Mon, 2022-05-30 at 20:03 +0200, Fabien Parent wrote:
>> Add IOMMU binding documentation for the MT8365 SoC.
>>
>> Signed-off-by: Fabien Parent <fparent@baylibre.com>
>> ---
>> .../bindings/iommu/mediatek,iommu.yaml | 2 +
>> include/dt-bindings/memory/mt8365-larb-port.h | 96
>> +++++++++++++++++++
>> 2 files changed, 98 insertions(+)
>> create mode 100644 include/dt-bindings/memory/mt8365-larb-port.h
>
> [snip...]
>
>> +#ifndef _DT_BINDINGS_MEMORY_MT8365_LARB_PORT_H_
>> +#define _DT_BINDINGS_MEMORY_MT8365_LARB_PORT_H_
>> +
>> +#include <dt-bindings/memory/mtk-memory-port.h>
>> +
>> +#define M4U_LARB0_ID 0
>> +#define M4U_LARB1_ID 1
>> +#define M4U_LARB2_ID 2
>> +#define M4U_LARB3_ID 3
>> +#define M4U_LARB4_ID 4
>> +#define M4U_LARB5_ID 5
>> +#define M4U_LARB6_ID 6
>> +#define M4U_LARB7_ID 7
>
> Remove these. they are no used, right?

AIOT and customers are using the modules and their related IOMMU modules.
DISP0, VENC, VDEC, ISP (CAMSYS), and APU (as far as I know, which should
be VP6?) were all supported.

>
>> +
>> +/* larb0 */
>> +#define M4U_PORT_DISP_OVL0 MTK_M4U_ID(0, 0)
>> +#define M4U_PORT_DISP_OVL0_2L MTK_M4U_ID(0, 1)
>
> [...]
>
>>
>> +/* larb4 */
>> +#define M4U_PORT_APU_READ MTK_M4U_ID(0, 0)
>> +#define M4U_PORT_APU_WRITE MTK_M4U_ID(0, 1)
>
> Please remove these two APU definitions. currently these are not
> supported.

Kidd, please help to check if APU use these definitions with Yong.
However, I think these are all available to the customers.

Thanks
Macpaul Lin

\
 
 \ /
  Last update: 2022-06-02 10:28    [W:0.107 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site