lkml.org 
[lkml]   [2022]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V12 00/10] irqchip: Add LoongArch-related irqchip drivers
From
Date


On 2022/6/18 下午6:39, Marc Zyngier wrote:
> On Wed, 15 Jun 2022 07:07:20 +0100,
> Jianmin Lv <lvjianmin@loongson.cn> wrote:
>>
>> LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
>> LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit
>> version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its
>> boot protocol LoongArch-specific interrupt controllers (similar to APIC)
>> are already added in the ACPI Specification 6.5(which may be published in
>> early June this year and the board is reviewing the draft).
>>
>> Currently, LoongArch based processors (e.g. Loongson-3A5000) can only
>> work together with LS7A chipsets. The irq chips in LoongArch computers
>> include CPUINTC (CPU Core Interrupt Controller), LIOINTC (Legacy I/O
>> Interrupt Controller), EIOINTC (Extended I/O Interrupt Controller),
>> HTVECINTC (Hyper-Transport Vector Interrupt Controller), PCH-PIC (Main
>> Interrupt Controller in LS7A chipset), PCH-LPC (LPC Interrupt Controller
>> in LS7A chipset) and PCH-MSI (MSI Interrupt Controller).
>>
>> CPUINTC is a per-core controller (in CPU), LIOINTC/EIOINTC/HTVECINTC are
>> per-package controllers (in CPU), while PCH-PIC/PCH-LPC/PCH-MSI are all
>> controllers out of CPU (i.e., in chipsets). These controllers (in other
>> words, irqchips) are linked in a hierarchy, and there are two models of
>> hierarchy (legacy model and extended model).
>>
>> Legacy IRQ model:
>>
>> In this model, the IPI (Inter-Processor Interrupt) and CPU Local Timer
>> interrupt go to CPUINTC directly, CPU UARTS interrupts go to LIOINTC,
>> while all other devices interrupts go to PCH-PIC/PCH-LPC/PCH-MSI and
>> gathered by HTVECINTC, and then go to LIOINTC, and then CPUINTC.
>>
>> +---------------------------------------------+
>> | |
>> | +-----+ +---------+ +-------+ |
>> | | IPI | --> | CPUINTC | <-- | Timer | |
>> | +-----+ +---------+ +-------+ |
>> | ^ |
>> | | |
>> | +---------+ +-------+ |
>> | | LIOINTC | <-- | UARTs | |
>> | +---------+ +-------+ |
>> | ^ |
>> | | |
>> | +-----------+ |
>> | | HTVECINTC | |
>> | +-----------+ |
>> | ^ ^ |
>> | | | |
>> | +---------+ +---------+ |
>> | | PCH-PIC | | PCH-MSI | |
>> | +---------+ +---------+ |
>> | ^ ^ ^ |
>> | | | | |
>> | +---------+ +---------+ +---------+ |
>> | | PCH-LPC | | Devices | | Devices | |
>> | +---------+ +---------+ +---------+ |
>> | ^ |
>> | | |
>> | +---------+ |
>> | | Devices | |
>> | +---------+ |
>> | |
>> | |
>> +---------------------------------------------+
>>
>> Extended IRQ model:
>>
>> In this model, the IPI (Inter-Processor Interrupt) and CPU Local Timer
>> interrupt go to CPUINTC directly, CPU UARTS interrupts go to LIOINTC,
>> while all other devices interrupts go to PCH-PIC/PCH-LPC/PCH-MSI and
>> gathered by EIOINTC, and then go to to CPUINTC directly.
>>
>> +--------------------------------------------------------+
>> | |
>> | +-----+ +---------+ +-------+ |
>> | | IPI | --> | CPUINTC | <-- | Timer | |
>> | +-----+ +---------+ +-------+ |
>> | ^ ^ |
>> | | | |
>> | +---------+ +---------+ +-------+ |
>> | | EIOINTC | | LIOINTC | <-- | UARTs | |
>> | +---------+ +---------+ +-------+ |
>> | ^ ^ |
>> | | | |
>> | +---------+ +---------+ |
>> | | PCH-PIC | | PCH-MSI | |
>> | +---------+ +---------+ |
>> | ^ ^ ^ |
>> | | | | |
>> | +---------+ +---------+ +---------+ |
>> | | PCH-LPC | | Devices | | Devices | |
>> | +---------+ +---------+ +---------+ |
>> | ^ |
>> | | |
>> | +---------+ |
>> | | Devices | |
>> | +---------+ |
>> | |
>> | |
>> +--------------------------------------------------------+
>>
>> The hierarchy model is constructed by parsing irq contronler structures
>> in MADT. Some controllers((e.g. LIOINTC, HTVECINTC, EIOINTC and PCH-LPC)
>> are hardcodingly connected to their parents, so their irqdomins are
>> separately routed to their parents in a fixed way. Some controllers
>> (e.g. PCH-PIC and PCH-MSI) could be routed to different parents for different
>> CPU. The firmware will config EIOINTC for the newer CPU and config HTVECINTC
>> for old CPU in MADT. By this way, PCH-PIC and PCH-MSI irqdomain can only be
>> routed one parent irqdomin: HTVECINTC or EIOINTC.
>>
>>
>> Example of irqchip topology in a system with two chipsets:
>>
>> +------------------------------------------------------------+
>> | |
>> | +------------------+ |
>> | | CPUINTC | |
>> | +------------------+ |
>> | ^ ^ |
>> | | | |
>> | +----------+ +----------+ |
>> | | EIOINTC 0| | EIOINTC 1| |
>> | +----------+ +----------+ |
>> | ^ ^ ^ ^ |
>> | | | | | |
>> | +----------+ +----------+ +----------+ +----------+ |
>> | | PCH-PIC 0| | PCH-MSI 0| | PCH-PIC 1| | PCH-MSI 1| |
>> | +----------+ +----------+ +----------+ +----------+ |
>> | |
>> | |
>> +------------------------------------------------------------+
>>
>> For systems with two chipsets, there are tow group(consists of EIOINTC, PCH-PIC and PCH-MSI) irqdomains,
>> and each group has same node id. So we defined a structure to mantain the relation of node and it's parent irqdomain.
>>
>> struct acpi_vector_group {
>> int node;
>> struct irq_domain *parent;
>> };
>>
>> The initialization and use of acpi_vector_group array are following:
>>
>> 1 Entry of struct acpi_vector_group array initialization:
>>
>> By parsing MCFG, the node id(from bit44-47 of Base Address)of each pci segment is extracted. And from MADT, we have the node id of each EIOINTC.
>>
>> entrys[pci segment].node = node id of pci segment
>> entrys[pci segment].parent = EIOINTC irqdomain(node id of EIOINTC == node id of pci segment)
>>
>> 2 Get parent irqdomain for PCH-PIC:
>>
>> From MADT, we have the node id of each PCH-PIC(from bit44-47 of Base Address).
>> if (node of entry i == node of PCH-PIC)
>> return entrys[i].parent;
>>
>> entrys[pci segment].node = node id of pci segment
>> entrys[pci segment].parent = EIOINTC irqdomain(node id of EIOINTC == node id of pci segment)
>>
>> 3 Get parent irqdomain for PCH-MSI of pci segment:
>>
>> return entrys[pci segment].parent;
>>
>> 4 How to select a correct irqdomain to map irq for a device?
>> For devices using legacy irq behind PCH-PIC, GSI is used to select correct PCH-PIC irqdomain.
>> For devices using msi irq behind PCH-MSI, the pci segmen of the device is used to select correct PCH-MSI irqdomain.
>>
>> V1 -> V2:
>> 1, Remove queued patches;
>> 2, Move common logic of DT/ACPI probing to common functions;
>> 3, Split .suspend()/.resume() functions to separate patches.
>>
>> V2 -> V3:
>> 1, Fix a bug for loongson-pch-pic probe;
>> 2, Some minor improvements for LPC controller.
>>
>> V3 -> V4:
>> 1, Rework the CPU interrupt controller driver;
>> 2, Some minor improvements for other controllers.
>>
>> V4 -> V5:
>> 1, Add a description of LoonArch's IRQ model;
>> 2, Support multiple EIOINTCs in one system;
>> 3, Some minor improvements for other controllers.
>>
>> V5 -> V6:
>> 1, Attach a fwnode to CPUINTC irq domain;
>> 2, Use raw spinlock instead of generic spinlock;
>> 3, Improve the method of restoring EIOINTC state;
>> 4, Update documentation, comments and commit messages.
>>
>> V6 -> V7:
>> 1, Fix build warnings reported by kernel test robot.
>>
>> V7 -> V8:
>> 1, Add arguments sanity checking for irqchip init functions;
>> 2, Support Loongson-3C5000 (One NUMA Node includes 4 EIOINTC Node).
>>
>> V8 -> V9:
>> 1, Rebase on 5.17-rc5;
>> 2, Update cover letter;
>> 3, Some small improvements.
>>
>> V9 -> V10:
>> 1, Rebase on 5.17-rc6;
>> 2, Fix build warnings reported by kernel test robot.
>>
>> V10 -> V11:
>> 1, Rebase on 5.18-rc4;
>> 2, Fix irq affinity setting for EIOINTC;
>> 3, Fix hwirq allocation failure for EIOINTC.
>>
>> V11 -> RFC:
>> 1, Refactored the way to build irqchip hierarchy topology.
>>
>> RFC -> RFC V2:
>> 1, Move all IO-interrupt related code to driver/irqchip from arch directory.
>> 2. Add description for an example of two chipsets system.
>>
>> RFC V2 -> RFC V3:
>> 1, Add support for multiple GSI domains
>> 2, Use ACPI_GENERIC_GSI for GSI handling
>> 3, Drop suspend-resume stuff
>> 4, Export fwnode handles instead of irq domain handles
>>
>> RFC V3 -> V12:
>> 1, Address patch attributions of the patch series
>>
>> Huacai Chen (7):
>> irqchip: Add LoongArch CPU interrupt controller support
>> irqchip/loongson-pch-pic: Add ACPI init support
>> irqchip/loongson-pch-msi: Add ACPI init support
>> irqchip/loongson-htvec: Add ACPI init support
>> irqchip/loongson-liointc: Add ACPI init support
>> irqchip: Add Loongson Extended I/O interrupt controller support
>> irqchip: Add Loongson PCH LPC controller support
>>
>> Jianmin Lv (2):
>> genirq/generic_chip: export irq_unmap_generic_chip
>> irqchip: create library file for LoongArch irqchip driver
>>
>> Marc Zyngier (1):
>> APCI: irq: Add support for multiple GSI domains
>>
>> drivers/acpi/bus.c | 3 +
>> drivers/acpi/irq.c | 40 ++--
>> drivers/irqchip/Kconfig | 28 +++
>> drivers/irqchip/Makefile | 3 +
>> drivers/irqchip/irq-gic-v3.c | 18 +-
>> drivers/irqchip/irq-gic.c | 18 +-
>> drivers/irqchip/irq-loongarch-cpu.c | 134 +++++++++++
>> drivers/irqchip/irq-loongarch-pic-common.c | 122 ++++++++++
>> drivers/irqchip/irq-loongarch-pic-common.h | 39 ++++
>> drivers/irqchip/irq-loongson-eiointc.c | 347 +++++++++++++++++++++++++++++
>> drivers/irqchip/irq-loongson-htvec.c | 119 +++++++---
>> drivers/irqchip/irq-loongson-liointc.c | 225 ++++++++++++-------
>> drivers/irqchip/irq-loongson-pch-lpc.c | 202 +++++++++++++++++
>> drivers/irqchip/irq-loongson-pch-msi.c | 138 ++++++++----
>> drivers/irqchip/irq-loongson-pch-pic.c | 171 +++++++++++---
>> include/linux/acpi.h | 3 +-
>> include/linux/cpuhotplug.h | 1 +
>> include/linux/irq.h | 1 +
>> kernel/irq/generic-chip.c | 2 +-
>> 19 files changed, 1402 insertions(+), 212 deletions(-)
>> create mode 100644 drivers/irqchip/irq-loongarch-cpu.c
>> create mode 100644 drivers/irqchip/irq-loongarch-pic-common.c
>> create mode 100644 drivers/irqchip/irq-loongarch-pic-common.h
>> create mode 100644 drivers/irqchip/irq-loongson-eiointc.c
>> create mode 100644 drivers/irqchip/irq-loongson-pch-lpc.c
>
> One thing I don't see here is the removal of the irq code that
> currently lives in arch/loongarch/kernel/acpi.c. It really should be
> removed as part of this series with the patch that enables the common
> ACPI irq code for this architecture.
>

Ok, I'll add the change of removing arch irq code and enabling common
irq code to the patch series.

> Thanks,
>
> M.
>

\
 
 \ /
  Last update: 2022-06-20 04:29    [W:0.099 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site