lkml.org 
[lkml]   [2022]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
On Sat, 18 Jun 2022 18:34:40 +0100
Jonathan Cameron <jic23@kernel.org> wrote:

> On Sat, 18 Jun 2022 19:00:19 +0200
> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
>
> > On 18/06/2022 08:50, ChiYuan Huang wrote:
> > > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> 於 2022年6月18日 週六 上午9:45寫道:
> > >>
> > >> On 17/06/2022 02:32, cy_huang wrote:
> > >>> From: ChiYuan Huang <cy_huang@richtek.com>
> > >>>
> > >>> Add the documentation for Richtek RTQ6056.
> > >>>
> > >>> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> > >>> ---
> > >>> .../bindings/iio/adc/richtek,rtq6056-adc.yaml | 57 ++++++++++++++++++++++
> > >>> 1 file changed, 57 insertions(+)
> > >>> create mode 100644 Documentation/devicetree/bindings/iio/adc/richtek,rtq6056-adc.yaml
> > >>>
> > >>> diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056-adc.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056-adc.yaml
> > >>> new file mode 100644
> > >>> index 00000000..6b4e0e0
> > >>> --- /dev/null
> > >>> +++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056-adc.yaml
> > >>> @@ -0,0 +1,57 @@
> > >>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > >>> +%YAML 1.2
> > >>> +---
> > >>> +$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056-adc.yaml#
> > >>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > >>> +
> > >>> +title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC
> > >>> +
> > >>> +maintainers:
> > >>> + - ChiYuan Huang <cy_huang@richtek.com>
> > >>> +
> > >>> +description: |
> > >>> + The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
> > >>> + interface, and the device provides full information for system by reading
> > >>> + out the loading current and power.
> > >>> +
> > >>> + The device monitors both of the drops across sense resistor and the BUS
> > >>> + voltage, converts into the current in amperes, and power in watts through
> > >>> + internal analog-to-digital converter ADC. The programmable calibration,
> > >>> + adjustable conversion time, and averaging function are also built in for
> > >>> + more design flexibility.
> > >>> +
> > >>> + Datasheet is available at
> > >>> + https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
> > >>> +
> > >>> +properties:
> > >>> + compatible:
> > >>> + const: richtek,rtq6056
> > >>> +
> > >>> + reg:
> > >>> + maxItems: 1
> > >>> +
> > >>> + "#io-channel-cells":
> > >>> + const: 1
> > >>> +
> > >>> + richtek,shunt-resistor-uohm:
> > >>
> > >> Use standard properties, so "-micro-ohms". Drop the unit from
> > >> description and drop the ref.
> > >>
> > > Use richtek.shunt-resistor-micro-ohms?
> >
> > Yes.
> >
> > > Or the prefix 'richtek,' can be removed?
> >
> > No, the vendor prefix must stay.
>
> It's a standard generic binding used in a bunch of IIO and hwmon
> drivers without vendor prefix. Mind you I can't find a definition

by which I meant to say "bindings" not drivers :)

> in any of the top level binding files. Probably wants to be in
> adc.yaml for IIO.
>
> Jonathan
>
>
> >
> > Best regards,
> > Krzysztof
>

\
 
 \ /
  Last update: 2022-06-18 19:27    [W:0.069 / U:0.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site