lkml.org 
[lkml]   [2022]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 12/23] ata: libahci: Extend port-cmd flags set with port capabilities
On Thu, Jun 16, 2022 at 09:28:18AM +0900, Damien Le Moal wrote:
> On 2022/06/16 5:58, Serge Semin wrote:
> > On Tue, Jun 14, 2022 at 05:32:41PM +0900, Damien Le Moal wrote:
> >> On 6/10/22 17:17, Serge Semin wrote:
> >>> Currently not all of the Port-specific capabilities listed in the
> >>
> >> s/listed/are listed
> >>
> >>> PORT_CMD-enumeration. Let's extend that set with the Cold Presence
> >>> Detection and Mechanical Presence Switch attached to the Port flags [1] so
> >>> to closeup the set of the platform-specific port-capabilities flags. Note
> >>> these flags are supposed to be set by the platform firmware if there is
> >>> one. Alternatively as we are about to do they can be set by means of the
> >>> OF properties.
> >>>
> >>> While at it replace PORT_IRQ_DEV_ILCK with PORT_IRQ_DMPS and fix the
> >>> comment there. In accordance with [2] that IRQ flag is supposed to
> >>> indicate the state of the signal coming from the Mechanical Presence
> >>> Switch.
> >>>
> >>> [1] Serial ATA AHCI 1.3.1 Specification, p.27
> >>> [2] Serial ATA AHCI 1.3.1 Specification, p.24, p.88
> >>>
> >>> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> >>> Reviewed-by: Hannes Reinecke <hare@suse.de>
> >>>
> >>> ---
> >>>
> >>> Changelog v4:
> >>> - Fix the DMPS macros name in the patch log. (@Sergei Shtylyov)
> >>> ---
> >>> drivers/ata/ahci.h | 7 ++++++-
> >>> 1 file changed, 6 insertions(+), 1 deletion(-)
> >>>
> >>> diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
> >>> index 7d834deefeb9..f501531bd1b3 100644
> >>> --- a/drivers/ata/ahci.h
> >>> +++ b/drivers/ata/ahci.h
> >>> @@ -138,7 +138,7 @@ enum {
> >>> PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
> >>>
> >>> PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
> >>> - PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
> >>> + PORT_IRQ_DMPS = (1 << 7), /* mechanical presence status */
> >>> PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
> >>> PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
> >>> PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
> >>> @@ -166,6 +166,8 @@ enum {
> >>> PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
> >>> PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */
> >>> PORT_CMD_ESP = (1 << 21), /* External Sata Port */
> >>> + PORT_CMD_CPD = (1 << 20), /* Cold Presence Detection */
> >>> + PORT_CMD_MPSP = (1 << 19), /* Mechanical Presence Switch */
> >>> PORT_CMD_HPCP = (1 << 18), /* HotPlug Capable Port */
> >>> PORT_CMD_PMP = (1 << 17), /* PMP attached */
> >>> PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
> >>> @@ -181,6 +183,9 @@ enum {
> >>> PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
> >>> PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
> >>>
> >>> + PORT_CMD_CAP = PORT_CMD_HPCP | PORT_CMD_MPSP |
> >>> + PORT_CMD_CPD | PORT_CMD_ESP | PORT_CMD_FBSCP,
> >>
> >
> >> What is this one for ? A comment above it would be nice.
> >
> > Isn't it obviously inferrable from the definition and the item name?
>

> I am guessing from the name. Am I guessing OK ? A comment would still be nice.
> Why just these bits ? There are more cap/support indicator bits in that port cmd
> bitfield. So why this particular set of bits ? What do they mean all together ?

Normally the variable/constant name should be self-content (as the
kernel coding style doc states and what the common sense suggests). So
the reader could correctly guess its purpose/content/value. In this
case PORT_CMD_CAP - means PORT CMD capabilities mask. All of the
possible flags have been set in that mask. There are no more
capabilities in the PORT CMD register left undeclared. That's why the
name is selected the way it is and why I haven't added any comment in
here (what the kernel coding style says about the over-commenting the
code).

>
> Sure I can go and read the specs to figure it out. But again, a comment would
> avoid readers of the code to have to decrypt all that.

If you still insist on having an additional comment. I can add
something like "/* PORT_CMD capabilities mask */". Are you ok with it?

-Sergey

>
> >
> > -Sergey
> >
> >>
> >>> +
> >>> /* PORT_FBS bits */
> >>> PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */
> >>> PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */
> >>
> >>
> >> --
> >> Damien Le Moal
> >> Western Digital Research
>
>
> --
> Damien Le Moal
> Western Digital Research

\
 
 \ /
  Last update: 2022-06-17 22:32    [W:0.095 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site