lkml.org 
[lkml]   [2022]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 2/3] dt-bindings: mfd: atmel,flexcom: Add new compatible string for lan966x
Date
On Fri, 17 Jun 2022 18:37:28 +0530, Kavyasree Kotagiri wrote:
> LAN966x SoC flexcoms has two optional I/O lines. Namely, CS0 and CS1
> in flexcom SPI mode. CTS and RTS in flexcom USART mode. These pins
> can be mapped to lan966x FLEXCOM_SHARED[0-20] pins and usage depends on
> functions being configured.
>
> Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
> ---
> v3 -> v4:
> - Added else condition to allOf:if:then.
>
> v2 -> v3:
> - Add reg property of lan966x missed in v2.
>
> v1 -> v2:
> - Use allOf:if:then for lan966x dt properties
>
> .../bindings/mfd/atmel,flexcom.yaml | 80 ++++++++++++++++++-
> 1 file changed, 79 insertions(+), 1 deletion(-)
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml: allOf:0:else:properties:reg: {'maxItems': 1, 'items': [{'description': 'Flexcom base regsiters map'}]} should not be valid under {'required': ['maxItems']}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml: allOf:0:then:properties:reg: 'oneOf' conditional failed, one must be fixed:
[{'description': 'Flexcom base regsiters map'}, {'description': 'Flexcom shared registers map'}] is too long
[{'description': 'Flexcom base regsiters map'}, {'description': 'Flexcom shared registers map'}] is too short
False schema does not allow 2
1 was expected
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml: ignoring, error in schema: allOf: 0: else: properties: reg
Documentation/devicetree/bindings/mfd/atmel,flexcom.example.dtb:0:0: /example-0/flexcom@f8034000: failed to match any schema with compatible: ['atmel,sama5d2-flexcom']
Documentation/devicetree/bindings/mfd/atmel,flexcom.example.dtb:0:0: /example-0/flexcom@f8034000/spi@400: failed to match any schema with compatible: ['atmel,at91rm9200-spi']
Documentation/devicetree/bindings/mfd/atmel,flexcom.example.dtb:0:0: /example-1/flexcom@e0064000: failed to match any schema with compatible: ['microchip,lan966x-flexcom']
Documentation/devicetree/bindings/mfd/atmel,flexcom.example.dtb:0:0: /example-1/flexcom@e0064000/spi@400: failed to match any schema with compatible: ['atmel,at91rm9200-spi']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

\
 
 \ /
  Last update: 2022-06-17 15:59    [W:0.095 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site