lkml.org 
[lkml]   [2022]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] dt-bindings: pinctrl-zynqmp: Add output-enable configuration
Date
Add 'output-enable' configuration parameter to the properties list.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
---
.../devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
index 2722dc7bb03d..1e2b9b627b12 100644
--- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
@@ -274,6 +274,10 @@ patternProperties:
slew-rate:
enum: [0, 1]

+ output-enable:
+ description:
+ This will internally disable the tri-state for MIO pins.
+
drive-strength:
description:
Selects the drive strength for MIO pins, in mA.
--
2.17.1
\
 
 \ /
  Last update: 2022-06-17 12:50    [W:0.105 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site