lkml.org 
[lkml]   [2022]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v11 05/10] drm/mediatek: Add MT8195 Embedded DisplayPort driver
From
Date
On Wed, 2022-06-15 at 11:06 +0800, CK Hu wrote:
> Hi, Bo-Chen:
>
> On Fri, 2022-06-10 at 18:55 +0800, Bo-Chen Chen wrote:
> > From: Markus Schneider-Pargmann <msp@baylibre.com>
> >
> > This patch adds a embedded displayport driver for the MediaTek
> > mt8195
> > SoC.
> >
> > It supports the MT8195, the embedded DisplayPort units. It offers
> > DisplayPort 1.4 with up to 4 lanes.
> >
> > The driver creates a child device for the phy. The child device
> > will
> > never exist without the parent being active. As they are sharing a
> > register range, the parent passes a regmap pointer to the child so
> > that
> > both can work with the same register range. The phy driver sets
> > device
> > data that is read by the parent to get the phy device that can be
> > used
> > to control the phy properties.
> >
> > This driver is based on an initial version by
> > Jitao shi <jitao.shi@mediatek.com>
> >
> > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> > [Bo-Chen: Cleanup the drivers and modify comments from reviewers]
> > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> > ---
>
> [snip]
>
> > +
> > +static int mtk_dp_parse_capabilities(struct mtk_dp *mtk_dp)
> > +{
> > + u8 val;
> > + struct mtk_dp_train_info *train_info = &mtk_dp->train_info;
> > +
> > + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER,
> > DP_SET_POWER_D0);
> > + usleep_range(2000, 5000);
> > +
> > + drm_dp_read_dpcd_caps(&mtk_dp->aux, mtk_dp->rx_cap);
> > +
> > + mtk_dp->rx_cap[DP_TRAINING_AUX_RD_INTERVAL] &=
> > DP_TRAINING_AUX_RD_MASK;
> > +
> > + train_info->link_rate = min_t(int, mtk_dp->max_linkrate,
> > + mtk_dp->rx_cap[mtk_dp-
> > > max_linkrate]);
> >
> > + train_info->lane_count = min_t(int, mtk_dp->max_lanes,
> > + drm_dp_max_lane_count(mtk_dp-
> > > rx_cap));
> >
> > +
> > + train_info->tps3 = drm_dp_tps3_supported(mtk_dp->rx_cap);
> > + train_info->tps4 = drm_dp_tps4_supported(mtk_dp->rx_cap);
> > +
> > + train_info->sink_ssc = !!(mtk_dp->rx_cap[DP_MAX_DOWNSPREAD] &
> > + DP_MAX_DOWNSPREAD_0_5);
>
> I think this is redundant because next statement would set sink_scc
> to
> false.
>
> Regards,
> CK
>

Hello Ck,

I will remove "train_info->sink_ssc = false;"

BRs,
Bo-Chen
> > +
> > + train_info->sink_ssc = false;
> > +
> > + drm_dp_dpcd_readb(&mtk_dp->aux, DP_MSTM_CAP, &val);
> > + if (val & DP_MST_CAP) {
> > + /* Clear DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 */
> > + drm_dp_dpcd_readb(&mtk_dp->aux,
> > + DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0,
> > &val);
> > + if (val)
> > + drm_dp_dpcd_writeb(&mtk_dp->aux,
> > + DP_DEVICE_SERVICE_IRQ_VECTOR
> > _ESI0,
> > + val);
> > + }
> > +
> > + return 0;
> > +}
>
>

\
 
 \ /
  Last update: 2022-06-17 10:28    [W:0.143 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site