lkml.org 
[lkml]   [2022]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH net-next 01/28] dt-bindings: phy: Add QorIQ SerDes binding
From
On 17/06/2022 13:32, Sean Anderson wrote:
> This adds a binding for the SerDes module found on QorIQ processors. The
> phy reference has two cells, one for the first lane and one for the
> last. This should allow for good support of multi-lane protocols when
> (if) they are added. There is no protocol option, because the driver is
> designed to be able to completely reconfigure lanes at runtime.
> Generally, the phy consumer can select the appropriate protocol using
> set_mode. For the most part there is only one protocol controller
> (consumer) per lane/protocol combination. The exception to this is the
> B4860 processor, which has some lanes which can be connected to
> multiple MACs. For that processor, I anticipate the easiest way to
> resolve this will be to add an additional cell with a "protocol
> controller instance" property.
>
> Each serdes has a unique set of supported protocols (and lanes). The
> support matrix is stored in the driver and is selected based on the
> compatible string. It is anticipated that a new compatible string will
> need to be added for each serdes on each SoC that drivers support is
> added for.
>
> There are two PLLs, each of which can be used as the master clock for
> each lane. Each PLL has its own reference. For the moment they are
> required, because it simplifies the driver implementation. Absent
> reference clocks can be modeled by a fixed-clock with a rate of 0.
>
> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> ---
>
> .../bindings/phy/fsl,qoriq-serdes.yaml | 78 +++++++++++++++++++
> 1 file changed, 78 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/fsl,qoriq-serdes.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/fsl,qoriq-serdes.yaml b/Documentation/devicetree/bindings/phy/fsl,qoriq-serdes.yaml
> new file mode 100644
> index 000000000000..4b9c1fcdab10
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/fsl,qoriq-serdes.yaml
> @@ -0,0 +1,78 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/fsl,qoriq-serdes.yaml#

File name: fsl,ls1046a-serdes.yaml

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP QorIQ SerDes Device Tree Bindings

s/Device Tree Bindings//

> +
> +maintainers:
> + - Sean Anderson <sean.anderson@seco.com>
> +
> +description: |
> + This binding describes the SerDes devices found in NXP's QorIQ line of

Describe the device, not the binding, so wording "This binding" is not
appropriate.

> + processors. The SerDes provides up to eight lanes. Each lane may be
> + configured individually, or may be combined with adjacent lanes for a
> + multi-lane protocol. The SerDes supports a variety of protocols, including up
> + to 10G Ethernet, PCIe, SATA, and others. The specific protocols supported for
> + each lane depend on the particular SoC.
> +
> +properties:

Compatible goes first.

> + "#phy-cells":
> + const: 2
> + description: |
> + The cells contain the following arguments.
> +
> + - description: |

Not a correct schema. What is this "- description" attached to? There is
no items here...

> + The first lane in the group. Lanes are numbered based on the register
> + offsets, not the I/O ports. This corresponds to the letter-based
> + ("Lane A") naming scheme, and not the number-based ("Lane 0") naming
> + scheme. On most SoCs, "Lane A" is "Lane 0", but not always.
> + minimum: 0
> + maximum: 7
> + - description: |
> + Last lane. For single-lane protocols, this should be the same as the
> + first lane.
> + minimum: 0
> + maximum: 7
> +
> + compatible:
> + enum:
> + - fsl,ls1046a-serdes-1
> + - fsl,ls1046a-serdes-2

Does not look like proper compatible and your explanation from commit
msg did not help me. What "1" and "2" stand for? Usually compatibles
cannot have some arbitrary properties encoded.

> +
> + clocks:
> + minItems: 2

No need for minItems.

> + maxItems: 2
> + description: |
> + Clock for each PLL reference clock input.
> +
> + clock-names:
> + minItems: 2
> + maxItems: 2
> + items:
> + pattern: "^ref[0-1]$"

No, instead describe actual items with "const". See other examples.

> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - "#phy-cells"
> + - compatible
> + - clocks
> + - clock-names
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + serdes1: phy@1ea0000 {
> + #phy-cells = <2>;
> + compatible = "fsl,ls1046a-serdes-1";
> + reg = <0x0 0x1ea0000 0x0 0x2000>;
> + clocks = <&clk_100mhz>, <&clk_156mhz>;
> + clock-names = "ref0", "ref1";
> + };
> +
> +...


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-06-18 03:16    [W:0.307 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site