Messages in this thread | | | Date | Fri, 17 Jun 2022 17:25:28 -0600 | From | Rob Herring <> | Subject | Re: [PATCH] dt-bindings: display: delete ilitek,ili9341.txt |
| |
On Fri, Jun 17, 2022 at 10:37:07PM +0100, Conor Dooley wrote: > From: Conor Dooley <conor.dooley@microchip.com> > > ilitek,ili9341.txt was replaced by ilitek,ili9341.yaml but the txt
panel/ilitek,ili9341.yaml
> binding was not deleted. Do so. > > Signed-off-by: Conor Dooley <conor.dooley@microchip.com> > --- > .../bindings/display/ilitek,ili9341.txt | 27 ------------------- > 1 file changed, 27 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt > > diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt > deleted file mode 100644 > index 169b32e4ee4e..000000000000 > --- a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt > +++ /dev/null > @@ -1,27 +0,0 @@ > -Ilitek ILI9341 display panels > - > -This binding is for display panels using an Ilitek ILI9341 controller in SPI > -mode. > - > -Required properties: > -- compatible: "adafruit,yx240qv29", "ilitek,ili9341"
"adafruit,yx240qv29" is not in the schema.
> -- dc-gpios: D/C pin > -- reset-gpios: Reset pin
Neither is this. It is in panel-common.yaml, but 'unevaluatedProperties' needs to be used instead to allow it. Or add 'reset-gpios: true'.
> - > -The node for this driver must be a child node of a SPI controller, hence > -all mandatory properties described in ../spi/spi-bus.txt must be specified. > - > -Optional properties: > -- rotation: panel rotation in degrees counter clockwise (0,90,180,270) > -- backlight: phandle of the backlight device attached to the panel > - > -Example: > - display@0{ > - compatible = "adafruit,yx240qv29", "ilitek,ili9341"; > - reg = <0>; > - spi-max-frequency = <32000000>; > - dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; > - reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; > - rotation = <270>; > - backlight = <&backlight>; > - }; > -- > 2.36.1 > >
| |