lkml.org 
[lkml]   [2022]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v20 2/5] usb: dwc3: core: Host wake up support from system suspend
On Thu, Jun 16, 2022 at 02:41:10PM +0530, Pavan Kondeti wrote:
> Hi Matthias/Krishna,
>
> On Tue, Jun 14, 2022 at 10:53:35AM -0700, Matthias Kaehlcke wrote:
> > On Mon, Jun 13, 2022 at 11:08:32AM -0700, Matthias Kaehlcke wrote:
> > > On Mon, Jun 06, 2022 at 01:45:51PM -0700, Matthias Kaehlcke wrote:
> > > > On Thu, Jun 02, 2022 at 12:35:42PM -0700, Matthias Kaehlcke wrote:
> > > > > Hi Krishna,
> > > > >
> > > > > with this version I see xHCI errors on my SC7180 based system, like
> > > > > these:
> > > > >
> > > > > [ 65.352605] xhci-hcd xhci-hcd.13.auto: xHC error in resume, USBSTS 0x401, Reinit
> > > > >
> > > > > [ 101.307155] xhci-hcd xhci-hcd.13.auto: WARN: xHC CMD_RUN timeout
> > > > >
> > > > > After resume a downstream hub isn't enumerated again.
> > > > >
> > > > > So far I didn't see those with v13, but I aso saw the first error with
> > > > > v16.
> > > >
> > > > It also happens with v13, but only when a wakeup capable vUSB <= 2
> > > > device is plugged in. Initially I used a wakeup capable USB3 to
> > > > Ethernet adapter to trigger the wakeup case, however older versions
> > > > of this series that use usb_wakeup_enabled_descendants() to check
> > > > for wakeup capable devices didn't actually check for vUSB > 2
> > > > devices.
> > > >
> > > > So the case were the controller/PHYs is powered down works, but
> > > > the controller is unhappy when the runtime PM path is used during
> > > > system suspend.
> > >
> > > The issue isn't seen on all systems using dwc3-qcom and the problem starts
> > > during probe(). The expected probe sequence is something like this:
> > >
> > > dwc3_qcom_probe
> > > dwc3_qcom_of_register_core
> > > dwc3_probe
> > >
> > > if (device_can_wakeup(&qcom->dwc3->dev))
> > > ...
> > >
> > > The important part is that device_can_wakeup() is called after dwc3_probe()
> > > has completed. That's what I see on a QC SC7280 system, where wakeup is
> > > generally working with these patches.
> > >
> > > However on a QC SC7180 system dwc3_probe() is deferred and only executed after
> > > dwc3_qcom_probe(). As a result the device_can_wakeup() call returns false.
> > > With that the controller/driver ends up in an unhappy state after system
> > > suspend.
> > >
> > > Probing is deferred on SC7180 because device_links_check_suppliers() finds
> > > that '88e3000.phy' isn't ready yet.
> >
> > It seems device links could be used to make sure the dwc3 core is present:
> >
> > Another example for an inconsistent state would be a device link that
> > represents a driver presence dependency, yet is added from the consumer’s
> > ->probe callback while the supplier hasn’t probed yet: Had the driver core
> > known about the device link earlier, it wouldn’t have probed the consumer
> > in the first place. The onus is thus on the consumer to check presence of
> > the supplier after adding the link, and defer probing on non-presence.
> >
> > https://www.kernel.org/doc/html/v5.18/driver-api/device_link.html#usage
> >
> >
> > You could add something like this to dwc3_qcom_of_register_core():
> >
> >
> > device_link_add(dev, &qcom->dwc3->dev,
> > DL_FLAG_AUTOREMOVE_CONSUMER | DL_FLAG_AUTOPROBE_CONSUMER);
> >
> > if (qcom->dwc3->dev.links.status != DL_DEV_DRIVER_BOUND)
> > ret = -EPROBE_DEFER;
> >
> >
> I am not very sure how the device_link_add() API works. we are the parent and
> creating a depdency on child probe. That does not sound correct to me.

The functional dependency is effectively there, the driver already assumes that
the dwc3 core was probed when of_platform_populate() returns.

The device link itself doesn't create the dependency on the probe(), the check
of the link status below does.

Another option would be to add a link to the PHYs to the dwc3-qcom node in
the device tree, but I don't think that would be a better solution (and I
expect Rob would oppose this).

I'm open to other solutions, so far the device link is the cleanest that came
to my mind.

I think the root issue is the driver architecture, with two interdependent
drivers for the same IP block, instead of a single framework driver with a
common part (dwc3 core) and vendor specific hooks/data.

> Any ways, I have another question.
>
> When dwc3_qcom_of_register_core() returns error back to dwc3_qcom_probe(), we
> goto depopulate label which calls of_platform_depopulate() which destroy the
> child devices that are populated. how does that ensure that child probe is
> completed by the time, our probe is called again. The child device it self is
> gone. Is this working because when our probe is called next time, the child
> probe depenencies are resolved?

Good point! It doesn't really ensure that the child is probed (actually it
won't be probed and DL_FLAG_AUTOPROBE_CONSUMER doesn't make sense here), it
could happen that dwc3_qcom_probe() is deferred multiple times, but eventually
the PHYs should be ready and dwc3_probe() be invoked through
of_platform_populate().

\
 
 \ /
  Last update: 2022-06-16 19:17    [W:0.121 / U:2.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site